611445
23
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
USER GUIDE
21
MASTER SECTION
1
PHANTOM POWER
Many professional condenser mics need PHANTOM POWER, which is a method of sending a powering
voltage down the same wires as the mic signal. Press the switch to enable the +48V power to all of the
MIC inputs. The adjacent LED illuminates when the power is active.
WARNING: TAKE CARE when using unbalanced mics which may be damaged by the phantom
power voltage. Balanced dynamic mics can normally be used with phantom power switched
on (contact your microphone manufacturer for guidance)
Mics should always be plugged in, and all output faders set to minimum before switching
the Phantom Power ON to avoid damage to external equipment
2
POWER INDICATOR
This LED lights to show when power is connected to the console.
3
BARGRAPH METERS
The three-colour peak reading BARGRAPH METERS normally show the level of the MIX RIGHT and MIX LEFT
outputs, giving you a constant warning of excessive peaks in the signal which might cause overloading. Aim
to keep the signal just touching the red segments at peak levels for best performance.
Similarly, if the output level is too low and hardly registering at all on the meters, the level of background
noise may become significant. Take care to set up the input levels for best performance.
When any PFL switch is pressed, the meters switch to show the selected PFL signal on both meters, in
mono.
4
PLAYBACK
The rotary control sets the level of the 2 Track Tape input, which is routed to the headphones, monitor
outputs and meters. These inputs, on RCA phono connectors are an ideal way to connect the playback of a
tape machine for monitoring.
5
PLAYBACK REPLACES MIX
Press this switch to replace the MIX Left/Right signal at the MIX outputs with the Playback signal connected
to the Left and Right RCA sockets
r
(see also p.22).
6
PLAYBACK PFL
Press this switch to route the Playback signal to the monitor and phones, over-riding the default monitor/
Phones signal. This listening point is before the PB LEVEL control, so material can be previewed before being
routed.
7
MONITOR LEVEL
This control sets the level to the MONITOR LEFT & RIGHT outputs. If headphones are plugged into the
PHONES jack, the headphone level will track the Monitor Level.
8
PHONES LEVEL
This control sets the output level to the Headphone outputs. If headphones are plugged into the PHNS jack,
then the knob sets a comfortable headphone listening level without affecting the Monitor output levels.
9
AUX MASTERS
Each Aux output has a master output level control and associated AFL switch.
AUX AFLS
Just like the PFL switches on the channels, you can monitor each AUX output by pressing the AFL switch.
This routes the AUX output signal to the MONITOR or PHONES, replacing the MIX signal. The METERS also
switch from the MIX to display the PFL/AFL signal and the PFL/AFL LED lights to warn that a PFL or AFL
switch is pressed. When you release the switch, the Monitor swaps back to the MIX.
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Soundcraft M4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Soundcraft M4 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,64 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Soundcraft M4

Soundcraft M4 Gebruiksaanwijzing - Deutsch - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info