581035
109
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
109US
Additional Information
Sound may not be output from the
receiver while the OSD appears on the
TV screen. Press HOME to display the
home menu, then press HOME again.
Audio signals (format, sampling
frequency, bit length, etc.) transmitted
from an HDMI jack may be suppressed
by the connected equipment. Check
the setup of the connected equipment if
the image is poor or the sound does not
come out of the equipment connected
via the HDMI cable.
When the connected equipment is not
compatible with copyright protection
technology (HDCP), the image and/or
the sound from the HDMI TV OUT
jack may be distorted or may not be
output. If this is the case, check the
specification of the connected
equipment.
Set the image resolution of the
playback equipment to more than
720p/1080i to enjoy High Bitrate
Audio (DTS-HD Master Audio, Dolby
TrueHD).
The image resolution of the playback
equipment may need to be at certain
settings before you can enjoy DSD and
Multi Channel Linear PCM. Refer to
the operating instructions of the
playback equipment.
Make sure the TV is compatible with
the System Audio Control function.
If the TV does not have System Audio
Control function, set the “HDMI
Audio Out” settings in HDMI Settings
menu to
“TV+AMP” if you want to listen to
the sound from the TV speaker and
receiver.
“AMP” if you want to listen to the
sound from the receiver.
When you connect the receiver to a
video equipment (projector, etc.),
sound may not be output from the
receiver. In this case, set the “HDMI
Audio Out” to “AMP” in the HDMI
Settings menu (page 94).
If you cannot listen to the sound of the
equipment connected to the receiver
while TV input is selected on the
receiver
Be sure to change the input of the
receiver to HDMI when you want to
watch a program on the equipment
connected via HDMI connection to
the receiver.
Change the TV channel when you
want to watch a TV broadcast.
Be sure to select the correct
equipment or input you want when
you watch a program from the
equipment connected to the TV.
Refer to the operating instructions of
the TV on this operation.
When “Analog Direct” is being used,
the sound is not output. Use other
sound field (page 51).
When using the Control for HDMI
function, you cannot control the
connected equipment using TV’s
remote control.
Depending on the connected
equipment and TV, you may need to
set up the equipment and TV. Refer
to the operating instructions
supplied with each equipment and
TV.
Change the input of the receiver to
the HDMI input connected to the
equipment.
Check that the selected digital audio
input jack is not reassigned to other
inputs (page 83).
The left and right sounds are
unbalanced or reversed.
Check that the speakers and equipment
are connected correctly and securely.
Adjust the sound level parameters
using the Speaker Settings menu.
109

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sony-STR-DN840

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony STR-DN840 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony STR-DN840 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sony STR-DN840

Sony STR-DN840 Gebruiksaanwijzing - Nederlands - 124 pagina's

Sony STR-DN840 Snelstart handleiding - Nederlands - 16 pagina's

Sony STR-DN840 Snelstart handleiding - English - 16 pagina's

Sony STR-DN840 Snelstart handleiding - Italiano, Polski - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info