581035
108
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
108US
When you want to listen to the sound
from the TV speaker, set the “HDMI
Audio Out” to “TV+AMP” in the
HDMI Settings menu (page 94). If you
cannot play back multi channel audio
source, set to “AMP”. However, the
sound will not output through the TV
speaker.
Sound may be interrupted when the
sampling frequency, the number of
channels or audio format of audio
output signals from the playback
equipment is switched.
There is severe hum or noise.
Check that the speakers and equipment
are connected securely.
Check that the connecting cords are
away from a transformer or motor, and
at least 3 meters (10 feet) away from a
TV set or fluorescent light.
Move your audio equipment away
from the TV.
The plugs and jacks are dirty. Wipe
them with a cloth slightly moistened
with alcohol.
There is no sound, or only a very low-
level sound is heard from specific
speakers.
Connect a pair of headphones to the
PHONES jack to verify that sound is
output from the headphones. If only
one channel is output from the
headphones, the equipment may not be
connected to the receiver correctly.
Check that all the cords are fully
inserted into the jacks on both the
receiver and the equipment.
If both channels are output from the
headphones, the front speaker may not
be connected to the receiver correctly.
Check the connection of the front
speaker which is not outputting any
sound.
Make sure you have connected to both
the L and R jacks of an analog
equipment, analog equipment requires
both L and R jack connections. Use an
audio cord (not supplied).
Adjust the speaker level (page 90).
Check that the speaker settings are
appropriate for the setup using the
Auto Calibration menu or “Speaker
Pattern” in the Speaker Settings menu.
Then check that sound is output from
each speaker correctly, using “Test
Tone” in the Speaker Settings menu.
Some discs have no Dolby Digital
Surround EX information.
Check that the subwoofer is connected
correctly and securely.
Make sure you have turned on your
subwoofer.
Depending on the selected sound field,
no sound will be available from the
subwoofer.
When all speakers are set to “Large”
and “Neo:6 Cinema” or “Neo:6
Music” is selected, there is no sound
from the subwoofer.
There is no sound from a specific
equipment.
Check that the equipment is connected
correctly to the audio input jacks for
that equipment.
Check that the cord(s) used for the
connection is (are) fully inserted into
the jacks on both the receiver and the
equipment.
Check the INPUT MODE (page 83).
Check that the equipment is connected
correctly to the HDMI jack for that
equipment.
Depending on the playback
equipment, you may need to set up the
HDMI setting of the equipment. Refer
to the operating instructions supplied
with each equipment.
Be sure to use a High Speed HDMI
cable when you view images or listen
to sound, especially for the 1080p,
Deep Color (Deep Colour), 4K or 3D
transmission.
108

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sony-STR-DN840

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sony STR-DN840 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sony STR-DN840 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sony STR-DN840

Sony STR-DN840 Gebruiksaanwijzing - Nederlands - 124 pagina's

Sony STR-DN840 Snelstart handleiding - Nederlands - 16 pagina's

Sony STR-DN840 Snelstart handleiding - English - 16 pagina's

Sony STR-DN840 Snelstart handleiding - Italiano, Polski - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info