680783
60
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
60
S10931-00001_Rev-D_EN
Opening, closing and stopping the door
1. Press the button (1) to open and close.
The door opens or closes depending on the
starting position.
2. Press the button (1) during the opening or closing
process.
The door stops:
3. Press the button (1) again.
The door moves into the respective starting
position.
Turning the lighting on and off
The button (2) lights up green when the Wallstation is
ready for operation and the operator is not locked.
1. Press the button (2).
Operator lighting switched on
2. Pressing the button (2) again switches the operator
lighting back off.
Operator lighting off.
INFORMATION
If the operator lighting is not switched off
manually, it switches off automatically after
60 minutes. This value can be changed via
SOMlink and a WiFi-enabled device.
The lighting cannot be switched off when the operator
is moving.
Locking or unlocking the operator
Unauthorised access can be prevented by locking
the operator. For example in the absence of the user
or to prevent unintentional activation with a handheld
transmitter.
The following functions are deactivated in the factory
settings when the lock button is activated:
Radio (handheld transmitter)
Senso ventilation function
Command device (corded external button)
To lock:
The button (2) on the Wallstation lights up green when
the operator is unlocked. The button (2) lights up red
when the operator has been locked by the Wallstation.
1. Press and hold the button (3) for at least 5 seconds
with the door closed.
Button(2)ashesgreen.
After 5 seconds, button (2) lights up red.
Locking function activated.
All the functions of the operator are locked.
INFORMATION
If the door was still open, it can be closed
using the handheld transmitter. Only then
are all operator functions locked.
To unlock:
1. Press the button (3) for at least 5 seconds.
Button(2)ashesred.
Button (2) lights up green.
Locking function deactivated.
All the functions of the operator are activated
again.
INFORMATION
All locking and unlocking functions can
be modied and adjusted with SOMlink
and a WiFi-enabled device. For more
information, ask your specialist dealer.
11.9 Conex
Two corded external buttons can be connected to the
KEYPAD connection with the Conex accessory part.
The function of the external buttons can be configured
via DIP switch 1 of the wall control unit. The factory
setting of DIP switch 1 is "OFF."
KEYPAD
1
Fig. Keypad connection
The Conex accessory part is plugged into the KEYPAD
slot, see separate "Conex" instructions.
DIP switches on
the wall control
unit
OFF
ON
1
ON
1
23
4
"Conex"
additional
circuit board
T1denes
door OPEN
T2denes
door CLOSE
"Conex"
additional
circuit board
T1 pulse
sequence
T2 lighting
function/partial
opening
11. Connections and special functions of the wall
control unit
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9110 pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9110 pro in de taal/talen: Engels als bijlage per email.

De handleiding is 10,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9110 pro

Sommer S 9110 pro Gebruiksaanwijzing - Nederlands - 88 pagina's

Sommer S 9110 pro Gebruiksaanwijzing - Deutsch - 88 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info