680825
64
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
64
S10564-00001_Rev-A_EN
11. Connections and special functions of the wall
control unit
INFORMATION
If a photo eye is used as a frame photo eye
on the door, move the door to the centre
position.
2-wire photo eye for door CLOSE (PHOTO 1)
TX
24 V
24 V
Sign
al
GND
GND
COM
RX
PHOTO 1
TX
2
4
V
2
4
V
GND
G
N
D
RX
P
HOTO 1
Fig. Terminal for 2-wire photo eye
Connect the 1- or 2-wire photo eye to the PHOTO 1
terminal block. The polarity is optional. The status LED
(PHOTO 1) for door CLOSE lights up orange when the
safety device has been detected by the control unit.
Terminal block Function
Signal 2-wire photo eye,
any polarity
COM
The 2-wire photo eye (PHOTO 1) is interrupted in the
door CLOSE direction:
Status LED ashes orange during the interruption.
The operator stops gently and opens the door
completely.
The door closes automatically after the open
holding and clearing time.
4-wire photo eye for door CLOSE (PHOTO 1)
TX
24 V
24 V
Signa
l
GND
GND
COM
RX
T
Y
PHOTO 1
IN
Fig. Terminal for 4-wire photo eye
Connect the 4-wire photo eye to the terminal block for
door CLOSE (PHOTO 1). The supply for RX (Receiver)
should be on the side facing away from the sun.
The status LED (PHOTO 1) for door CLOSE lights up
orange when the safety device has been detected by the
control unit.
Terminal
block
Function
TX (Trans-
ceiver)
+24 V DC
Power supply
GND
RX
(receiver)
+24 V DC
GND
SIGNAL Potential-free relay
contact
COM
The photo eye (PHOTO 1) is interrupted in the door
CLOSE direction:
Status LED ashes orange during the interruption.
The operator stops gently and opens the door
completely.
The door closes automatically after the open
holding and clearing time.
Use as frame photo eye
1. Install the frame photo eye in the frame, see separate
"Frame photo eye" installation instructions.
2. Align the frame photo eye and connect to the wall
control unit.
3. Commissioning is performed as described in Chapter
"9. Commissioning".
If the door passes the frame photo eye, the
illumination power of the operator lighting is
reduced.
If the illumination power is not reduced, the frame
photo eye must be realigned and the control unit
must be reset.
During commissioning, the operator learns the
exact position of the frame photo eye in order to
blank it out in normal mode shortly before reaching
the door.
4. Check the frame photo eye function.Repeat the
process if necessary.
64

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9060 Tiga bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9060 Tiga in de taal/talen: Engels als bijlage per email.

De handleiding is 28,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9060 Tiga

Sommer S 9060 Tiga Gebruiksaanwijzing - Nederlands - 96 pagina's

Sommer S 9060 Tiga Gebruiksaanwijzing - Deutsch - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info