680825
63
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
63
S10564-00001_Rev-A_EN
11. Connections and special functions of the wall
control unit
11.5 Multi-function relay - MUFU 1
The MUFU 1 multi-function relay can be used for various
functions, such as additional exterior lighting or a door
status display. In delivery condition from the factory, the
multi-function relays outputs a pulse of 1 second every
time the motor starts.
INFORMATION
The functions of the multi-function relay
can be changed by SOMlink, a WLAN-
enabled device and a Memo tiga.
10 additional congurations are available
for the multi-function relay.
Time can also be set for timer operation.
Multi-function relay 1 - MUFU 1
ON
123
MUFU 1
Fig. LED for MUFU 1 Fig. MUFU 1
The status LED for MUFU 1 lights up green when the
relay is energised.
NOTE
Multi-function relay 1 contact is a potential-
neutral changeover contact and may only
be loaded with max. 250 V AC, 5 A or max.
24 V DC, 5 A.
The "Pulse for 1 second when starting motor" function is
set at the factory:
Multi-function relay 1 outputs a pulse of 1 second
every time the motor starts.
11.6 Relay
An additional multi-function relay can be attached at the
Relay slot. Additional functions can be activated, e.g.
exterior lighting or the door status display. The relay is an
optional accessory.
INFORMATION
The functions of the multi-function relay
can be changed by SOMlink, a WLAN-
enabled device and a Memo tiga.
10 additional congurations are available
for the multi-function relay.
Time can also be set for timer operation.
1
4
1
3
3
4
S1
Fig. Relay slot
NOTE
The relay contact is a potential-neutral
changeover contact and may only be
loaded with max. 250 V AC, 5 A or max.
24 V DC, 5 A.
The following function is activated at the factory.
The relay activates for 1 second when the operator
starts.
11.7 Photo eye and frame photo eye
Alternatively a 2-wire photo eye from SOMMER
Antriebs- und Funktechnik GmbH or a 4-wire photo
eye can be connected to the control unit. During
commissioning, the control system automatically detects
which version it is and sets itself to that version.
INFORMATION
If a photo eye is connected for door CLOSE
and detected by the control unit, the
close function is automatically activated.
The position of DIP switch 1 on the carriage
is independent of this.
INFORMATION
If a photo eye is retrotted on a
programmed system, the control
system must be reset, see Chapter
"10.13 Resetting the control unit".
INFORMATION
During commissioning of the photo eye
or the frame photo eye, it must not be
triggered by persons or objects.
63

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sommer S 9060 Tiga bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sommer S 9060 Tiga in de taal/talen: Engels als bijlage per email.

De handleiding is 28,61 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sommer S 9060 Tiga

Sommer S 9060 Tiga Gebruiksaanwijzing - Nederlands - 96 pagina's

Sommer S 9060 Tiga Gebruiksaanwijzing - Deutsch - 96 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info