658836
31
Verklein
Vergroot
Pagina terug
1/46
Pagina verder
Using the chainsaw - Felling
ENGLISH 31
E
N
G
Consider the general condition of the tree:
Hanging direction – loose or dry branches – height of the tree – natural overhang – is the tree
diseased?
You also need to take into account the wind speed and wind direction. Do not fell a tree under
heavy, gusting winds.
The foot of the trunk must be free of all foreign objects, roots, undergrowth and branches.
Ensure that you have a secure footing and remove any objects which could cause you to trip.
Cutting into the buttress roots:
Start with the largest buttress root first.
Make a vertical cut into the root
#, followed by a horizontal cut $.
Never cut into diseased trunks before felling them.
Leave the buttress root intact as a wedge on the side opposite the
direction of fall.
Make the felling notch and perform the felling cut:
The felling notch determines the direction in which the tree falls and helps to control the fall. It is made
perpendicular to the fall direction with a cut through 1/5 - 1/3 of the trunk diameter. The cut should
preferably be made close to the ground.
# Start with the upper cut (roof of the felling notch).
$ Then make the lower cut (bottom of the felling
notch). The lower cut should meet the upper cut
precisely.
Check the direction of fall.
If the felling notch needs to be corrected, always re-
cut it across the full width. In exceptional cases it is
also possible to slope the lower cut upwards to obtain
a more open felling notch. If the tree is situated on a
slope this gives longer control over the fall.
& Call out a warning before positioning the chainsaw
for the felling cut. The felling cut is made higher
'
than the bottom of the felling notch
$. This cut must
be exactly horizontal. In front of the felling notch
around 1/10 of the trunk diameter needs to be left as
a hinge
(.
( The hinge must not be cut through, as this could result in loss of control over the fall of the tree.
Wedges need to be positioned in good time. The felling cut must only be secured with plastic or
aluminium wedges, and steel wedges must never be used.
During felling, always keep to the side of the tree.
When working on a slope, the operator of the saw should stand above or to the side of the trunk or
tree being worked on.
When the tree falls call out another warning, stand back, observe the crown of the tree and watch
out for falling branches.
Wait for the crown to swing out.
Do not continue work under branches or trees which have become caught.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Solo-644

Zoeken resetten

  • Hallo!
    Ik heb een Solo 644 kettingzaag. Nu lekt die benzine. Op de aanzuigleiding zit een verdikking die in de opening naar buiten komt. Waarschijnlijk zit die niet meer op de juiste plaats. Hoe kom ik eraan of plaats ik een nieuwe aanzuigleiding? Gesteld op 1-3-2023 om 16:00

    Reageer op deze vraag Misbruik melden
  • Hallo,
    Solo 644 is een hele tijd niet gebruikt
    en start .. heeft wel voldoende compressie
    altijd mengsmering gebruikt,
    mvgr. erlenhofe@hotmail.com
    Gesteld op 23-1-2021 om 10:17

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solo 644 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solo 644 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info