Page 46 BASL - 02 - V03
User manual
UK
5.9.10 Insert the grounds
container.
5.9.11 Reassemble the
foamer head and fit it back
onto the machine.
Important:
Regular decalcifying will
protect your coffee machine
from expensive repairs. Any
damage to the appliance
resulting from omission of this
treatment, failure to follow the
correct procedure or from non-
compliance with these
instructions is excluded from
warranty cover.
5.10 Installation / disassembly of foamer
head
5.10.1 Disassemble the
foamer head by slightly
pressing the outlet cup
between thumb and index
finger. Pull the outlet down-
wards.
5.10.2 Swivle the foam
chamber away from the outlet
cup before pulling it
downwards.
Now you can unscrew the pipe
from the foam chamber and
remove the milk tube as well
as the tube nipple.
5.10.3 Clean all parts under
clean, warm running water.
5.10.4 Reinstall the foamer
head by repeating steps
5.10.1 to 5.10.2 in reverse
order.
5.11 Foam nozzle / milk suction nozzle
cleaning
5.11.1 Clean foam nozzle
Clean the foam nozzle and
pierce it with the blast valve
tenon cleaner.
5.11.2 Clean the milk
suction nozzle
Clean and pierce the milk
suction nozzle with the brush.
