Page 42 BASL - 02 - V03
User manual
UK
5.6 Rinsing the Cappuccino system
Important:
For hygiene reasons, the "foamer head with tube"
should be cleaned immediately after usage.
5.6.1 Manual rinsing of the Cappuccino outlet
system
5.6.1.1 The button (Rinsing/Cleaning) has several
features programmed to it on the Cappuccino
model:
Press the button briefly (Rinsing /
Cleaning) as follows:
1x = Rinsing brewing unit
Display: "Rinsing"
2x = Rinsing Cappuccino
Display: "Capp. Rinsing"
3x = Manual cleaning
Cappuccino
Display: "Capp. Cleaning"
If you pressed the wrong
button, press on until the
desired message appears in
the display.
If the button is not pressed within 3 seconds, the selected
menu starts automatically.
(The multiple programming for the rinsing and the manual
Cappuccino cleaning can be activated and/or deactivated by
either a service technician or service office independently of
each other).
5.6.1.2 Place the tube in the
container with fresh, cold
water (approx. 1.5 dl)
Place a cup (approx. 1.5 dl
capacity) under the foamer
head.
5.6.1.3 Press the
button
2x briefly (Rinsing /
Cleaning). Rinsing of the
Cappuccino system is started.
5.7 Daily cleaning cappuccino system
Important:
For hygienic reasons, the "foamer head with hose" must be
cleaned once a day (preferably at the end of the business day)
with the cleaning agent:
Note:
A precondition is that the
machine is ready for operation
according to point 4.1 on initial
operation, i.e. the tank is filled
up with water and the
temperature control display
is illuminated in green and the
display message "Ready" is
shown.
5.7.1 Dismantle the
foamer head and thoroughly
clean each part by hand under
running water.
Reassemble the foamer head
and fit it back onto the
machine.
5.7.2 Fill the cleaning
container with approximately
3 dl of warm water
(approx. 50° C) and then add
1 cleaning tab for milk systems
(see the cleaning tab container
label for the correct dosage).
Example of dosage:
Water = 3 dl
Tab = 1 pc.
Place the foamer head tube in the cleaning container. The tube
end must be touching the bottom of the cleaning container!
Place a container (approx. 0.5 litre Capacity) under the foamer
head.
5.7.3 The button (Rinsing/Cleaning) has several features
programmed to it on the Cappuccino model:
(see section 5.6.1.1)
5.7.4 Press the button
3x briefly (Rinsing /
Cleaning). The cleaning
program starts.
The display shows "Capp.
Cleaning"
(Cleaning duration
approximately 40 seconds)
Wait until "Rinsing" appears on
the display.
5.7.5 Rinse out the
cleaning container thoroughly
with fresh water and fill it with
fresh cold water.
Ready
≈
+
≈
+
≈
+
≈
+
≈
+
≈
+
≈
+
