799214
11
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
- Raise the presser foot lifter, and press the presser foot locking lever.
󰀨
(Fig.3) (Fig.4)
Installing the presser foot
- Put the presser foot under the presser foot locking device, lower the
presser foot lifter, press the foot locking device to reset the foot, and
lift the presser foot lifter. (Fig.5) (Fig.6)
Caution
- 󰀨
remove foot pedal when replacement presser foot.
- When replace the presser foot please place the machine on stable
platform.
- 

Threading the sewing machine
Replacing the bottom bobbin
- 1. Slide the bobbin cover button to the right and remove the bobbin
cover (Fig.7)
- 2. Put the new bobbin in the holder, with the thread going clockwise.
Leave 10 cm of thread hanging out. (Fig.8)
- 3. Hold the end of the upper thread with one hand, and turn the hand
wheel counterclockwise with the other hand, the needle thread will
pick up the bobbin thread and pull it up through the hole under the
needle (Fig.9).
- 4. Replace the bobbin cover and separate the two threads and pull
them to the back of the machine under the presser foot, leaving about
15cm hanging there (Fig.10).
Caution
- 󰀨
remove foot pedal when replacing bottom bobbin.
- Please use metal bobbins, otherwise the magnetic holder cannot tense
the bobbin thread and work rightly.
Sewing
- 1. Turn the hand Wheel conterclockwise to raise the needle to its
highest position.
- 2. Raise the foot lifter and place the fabric you want to sew under the
presser foot (Fig.11).
- 3. Lower the presser foot. (Fig. 12).
- 4. Rotate the pattern selection dial to select the stitch pattern you
wanted.
- 󰀨
switch and turn the hand wheel to raise the needle all the way up so it
doesn’t get stuck and bent.
- CAUTION: Changing the stitch pattern is not allowed when the ma-
chine is running; otherwise, the needle and/or machine may damage.
- 5. Turn the hand wheel counterclockwise several times to make sure
there is no jamming in the stitches.
- 6. Slide the power switch to the LOW or HIGH speed position and the
machine will automatically start sewing. We recommend the LOW
speed for beginners (Fig.13)
- 󰀨
turn the hand wheel to raise the needle all the way up, lift the presser
foot, and then gently remove the fabric from the sewing machine, and
cut the thread with the thread cutter. (Fig.14)
Usage tips
- 󰀩
then pull out the fabric gently.
- If the thread had tangled or jammed, please turn the hand wheel and
simultaneously pull the thread slightly to release the thread. Bottom
bobbin mechanism is a more precise part, inappropriate actions may

Features
1. Selection of stitch pattern
- Rotate the pattern selection dial to select the 16
stitch patterns you wanted.
- CAUTION: Before you change the stitch pattern,
󰀨
to raise the needle all the way up so it doesn’t get
stuck and bent.
- CAUTION: Changing the stitch pattern is not
allowed when the machine is running; otherwise, the
needle and/or machine may damage.
2. Reverse sewing
- When the machine is running, press down and
hold the reverse sewing button when you want to do
reverse sewing; release the button, the machine is
doing normal sewing.
3. Setting the sewing speed
- Slide the power switch to “I” or “II” position.
- I: Low speed
- II. High speed
4. Working lamp
- If additional light is needed, press the light switch
to turn the light “ON”. Press the switch again to turn
it “OFF”.
5. Thread cutter
- The machine has a thread cutter on the central left
󰀨
sewing or winding thread.
6. Sewing sleeves
- This sewing machine has been designed to sew
sleeves or any narrow openings in garment. Pull out
the drawer and position the garment over the sewing
arm if you want to sew the sleeves.
7. Manual buttonhole
- 1. Put the cloth under the presser foot and lower the presser foot on
the cloth where you need to sew buttonhole, then choose the 15th
stitch.
- 󰀨
switch (Fig.15).
- 3. Choose the 16th stitch, turn on switch and sew on the cloth in suit-
󰀨
straight line. (Fig.16)
- 4. Choose the 15th stitch, then turn on switch and sew 5-6 stitch in low
󰀨
- 5. Raise the presser foot, rotating the cloth for 180º (Fig.18)
- Choose the 16th stitch, then turn on switch and sew till buttonhole is
fully sewed. (Fig.19)
8. Drawer.
- This drawer is an accessory storage compartment, which can be slide
out and you can store spare bobbins, needles, etc. in it.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Solac SW8231 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Solac SW8231 in de taal/talen: Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 2.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info