798726
26
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
español english français portuguese deutsch italiano
INFORMATION ON SERVICING
1) Checks to the area
Prior to beginning work on systems containing
flammable refrigerants, safety checks ar
necessary to ensure that the risk of ignition is
minimised. For repair to the refrigerating
system, the following precautions shall be
complied with prior to conducting work on the
system.
2) Work procedure
Work shall be undertaken under a controlled
procedure so as to minimise the risk of a
flammable gas or vapour being present while the
work is being performed.
3) General work area
All maintenance staff and others working in the
local area shall be instructed on the
nature of work being carried out. Work in confine
spaces shall be avoided. The area
around the workspace shall be sectioned off
Ensure that the conditions within the area
have been made safe by control of flammabl
material.
4) Checking for presence of refrigerant
The area shall be checked with an appropriate
refrigerant detector prior to and during
work, to ensure the technician is aware of
potentially flammable atmospheres. Ensur
that the leak detection equipment being used is
suitable for use with flammabl
refrigerants, i.e. non-sparking, adequately sealed
or intrinsically safe.
5) Presence of re extinguisher
If any hot work is to be conducted on the
refrigeration equipment or any associated parts,
appropriate fire extinguishing equipment shall be
available to hand. Have a dry powder or
CO2 fire extinguisher adjacent to the charging
area.
6) No ignition sources
No person carrying out work in relation to a
refrigeration system which involves exposing
any pipe work that contains or has contained
flammable refrigerant shall use any source
of ignition in such a manner that it may lead to the
risk of fire or explosion. All possible
ignition sources, including cigarette smoking,
should be kept sufficiently far away from t
site of installation, repairing, removing and
disposal, during which flammable refrigeran
can possibly be released to the surrounding
space. Prior to work taking place, the area
around the equipment is to be surveyed to make
sure that there are no flammabl
hazards or ignition risks. “No Smoking” signs shall
be displayed.
7) Ventilated area
Ensure that the area is in the open or that it is
adequately ventilated before breaking into
the system or conducting any hot work. A degree
of ventilation shall continue during the
period that the work is carried out. The ventilation
should safely disperse any released
refrigerant and preferably expel it externally into
the atmosphere.
8) Checks to the refrigeration equipment
Where electrical components are being changed,
they shall be fit for the purpose and t
the correct specification. At all times the
manufacturers maintenance and service
guidelines shall be followed. If in doubt consult the
manufacturers technical department
for assistance.
The following checks shall be applied to
installations using flammable refrigerants
– The charge size is in accordance with the room
size within which the refrigerant
containing parts are installed;
The ventilation machinery and outlets are
operating adequately and are not obstructed;
If an indirect refrigerating circuit is being used,
the secondary circuit shall be checked
for the presence of refrigerant;
Marking to the equipment continues to be visible
and legible. Markings and signs that
are illegible shall be corrected;
Refrigeration pipe or components are installed in
a position where they are unlikely to
be exposed to any substance which may corrode
refrigerant containing components,
unless the components are constructed of
materials which are inherently resistant to
being corroded or are suitably protected against
being so corroded.
9) Checks to electrical devices
Repair and maintenance to electrical components
shall include initial safety checks and
component inspection procedures. If a fault exists
that could compromise safety, then no
electrical supply shall be connected to the circuit
until it is satisfactorily dealt with. If the
fault cannot be corrected immediately but it is
necessary to continue operation, an
adequate temporary solution shall be used. This
shall be reported to the owner of the
equipment so all parties are advised.
Initial safety checks shall include:
That capacitors are discharged: this shall be
done in a safe manner to avoid possibility
of sparking;
That there no live electrical components and
wiring are exposed while charging,
recovering or purging the system;
That there is continuity of earth bonding.
26
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sogo SS-1287 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sogo SS-1287 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 1.26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info