687058

Smartwares CIP-39940 Handleiding

16
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
Wireless Pan/Tilt APP Camera
Installation and Operating Instructions
Model: CIP-39940
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
1
CONTENTS
Overview ......................................................................................................... 2
Please Read Before You Start ..................................................................................3
Wireless Device Operating Range
............................................................................3
Important Safety Precautions
....................................................................................3
Getting Started ............................................................................................... 5
Kit Content ................................................................................................................ 5
Safety and Installation Tips
.......................................................................................6
Product Overview
.....................................................................................................7
LED Indicator ............................................................................................................ 8
Install Your Camera
..................................................................................................9
Setting up Your camera
...........................................................................................10
APP Introduction .......................................................................................... 12
Main Page ..............................................................................................................12
Live View / Snapshot / Recording
...........................................................................14
View Your Snapshots
..............................................................................................17
Playback Your Videos
.............................................................................................17
Advanced Setting ....................................................................................................23
Trouble Shooting ......................................................................................... 30
Product Specication
.................................................................................. 32
Storage Media Management ....................................................................... 33
2
OVERVIEW
The CIP-39940 camera is capable of delivering high quality Digital High Definition (HD) video to
your smart-mobile device(s), which would require higher internet bandwidth. Due to your local
internet environment condition, your mobile device(s) may display black-screen or temporary
disconnect to the CIP-39940 camera.
* Make sure the CIP-39940 camera is operating with sufficient internet bandwidth, 1Mbps
(upload/download speed) is suggested.
* For the best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile
network in order to receive maximum download speed.
* When the internet transmission is low, the APP will automatically switch to Relay
Mode:
‧ By adjusting to “Better Streaming” in the system setting section the APP
performance may improve.
* Your internet bandwidth is limited. For best performance, avoid more than two users
connecting to the CIP-39940 camera simultaneously.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual
core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve range:
‧ Change router/camera relative position to receive better signal.
‧ Use wired Ethernet cable on the CIP-39940 camera to establish connection between
CIP-39940 camera and your router.
‧ Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
‧ Switch your router to 11b/11g mode in order to improve router service range.
‧ Purchase extension cable or high gain antenna for your camera from the CIP-39940
vendor.
* Please make sure the memory card used is CLASS10 rated.
3
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this operating manual will void the warranty!
We will
not assume any liability for damages to items or persons caused by improper
handling or non-
compliance with the safety notices! Any warranty claim will be null and
void in such cases.
1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be
voided.
2. Avoid all contact with water, ensure dry hands before using.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing
so
may
damage the camera or cause camera temporary malfunction.
5. Use the devices with care. Avoid pressing hard on the camera body.
6. For your own safety, avoid using the camera or power off the camera when there
is
a
storm or
lightning.
7. Remove the power adapter during long periods between usages.
8. Use only the accessories and power adapters supplied by the manufacturer.
9. To meet the regulations pertaining to parental responsibility, keep the devices out of
the reach of
infants.
10. Check power cables do not get crushed or damaged by sharp edges whenever the
devices
are in operation.
PLEASE READ BEFORE YOU START
Always use discretion when installing CCTV equipment, especially when there is
perceived policy.
Enquire relevant local regulations applicable to the lawful installation
of video recording/surveillance.
Third party consent may be required.
WIRELESS DEVICES OPERATING RANGE
Ensure the signal reception viewed from the wireless camera(s) is the best possible
reception
between the camera(s) and the Wi-Fi router. If necessary, reduce the
distance between the
camera(s) and the Wi-Fi router to improve overall system
performance. Wireless Color Camera
Recordable CCTV Kit operating on a secure
digital 2.4GHz frequency which could greatly reduce
interference from product such
as wireless routers, cordless phones or microwave ovens.
5
For best system performance:
- iOS: iPhone5 / iPad2 / Mini iPad with iOS 7.0 or above.
- Android: 1.5G dual core processor dual core procesor with 1G Ram or above.
- Storage: Class 10 memory card.
- Bandwidth: 1Mbps or above upload/download speed suggested.
Wireless App Camera
Camera Antenna
Hex Key
Screw Pack
Quick Start Guide
RJ45 Connect Jack
Power Adapter
x 1
x 1
x 1
x 1
x 1
x 1
Tools Required:
‧
Electric drill
‧
5mm masonry drill bit
‧
15mm masonry drill bit
‧
No. 2 Philips screwdriver
x 1
KIT CONTENT
6
SAFETY AND INSTALLATION TIPS
Do not attempt to open the units with the power adaptor plug connected to avoid any risk of
personal injury.
When installing CCTV camera(s), always follow manufacturer's advice when using power tools,
steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles) when drilling
holes. Before drilling holes through walls, check for hidden electricity cables and water pipes. The
use of cable/pipe detector is advisable.
To avoid exposing any cameras to extreme weather conditions (e.g., under a gutter which is prone
to any water leaks). When installing any cameras with this unit, to use cable conduit to protect any
video/power extension cables from being exposed externally and to prevent/reduce the chances of
the cables being tampered with. After drilling any hole though an external wall for a cable, ensure
the hole is sealed up around the cable using a sealant to prevent drafts.
To prevent a re or electrical shock hazard, do not attempt to open the housing while the unit is
exposed to rain, water or wet conditions. There are no user serviceable parts inside. Refer servicing
to qualied service personnel. Avoid pointing the camera(s) directly at the sun or any bushes, tree
branches or moving objects that might unnecessarily cause the camera to record.
7
PRODUCT OVERVIEW
Light Sensor
Antenna
Microphone
Reset Button
LENS
SD Card Slot
Rj 45 Connect
Power Adapter
Router
Mount Bracket
Camera
Interface Connection
Note:
Press and hold the “Reset” button for 5 seconds. All settings are restored to the factory
default.
8
LED INDICATOR
STATUS DESCRIPTION
Power On Power on the camera and wait until the RED LED indicator
becomes steady on. This process would be finished within 45
seconds and make sure the LED is ashing in RED.
Soft AP RED LED ashes once followed by 2 short ashes.
Reset factory under Soft AP RED LED ashes quickly
Default Reset RED LED ashes quickly
Update Firmware RED LED ashes quickly
Start Recording Video RED LED ashes once
9
Install Your Camera
1. Drill the mounting holes by using the alignment paper.
2. Insert the 4 screw anchors into the wall.
3. Insert the 4 screws into the screw anchors and reserved space 8 to 10 mm .
4. Hang the camera on the 4 screws, then fasten 4 screws by using hex key.
1 2
43
Note:
Before mounting the camera, install the memory card if you prefer recording video to local
storage.
10
2. Power on the camera
Connect the power wires to the adapter supplied, and wait until the RED LED indicator becomes
steady on. This process would be finished within 1 min and make sure the LED stops
flashing in RED.
3a.Wireless Connection
(1) In the Wi-Fi setting of your smart device. Choose the Wi-Fi router with prefix of HD-xxxxxx
(xxxxxx=Camera ID numbers). Then enter the default password 12345678.
(2) Launch the APP, tap to add the camera.
(3) Tap (QR code icon) and scan the QR code label on the back of the camera to bring up the DID
information. Or tap “Search” to locate the camera.
(4) Enter the default password 123456.
(5) Tap “Save” when you done.
(6) Later, APP will request user to modify the default password to private password .
For iOS For Android
Setting up Y
our Camera
Follow the instructions below to help congure your camera for initial use.
1. APP download
Download and install the "Smartwares view" APP to your device.
(iOS) (Android)
11
3b.Wired Connection
1. Make sure your smartphone is connected your Wi-Fi router.
2. Connect the camera’s Ethernet cable to the Rj45 connect. The other side, connect to the Wi-Fi
router, and power on the camera with adapter.
3. Launch the APP, tap “Search” to locate the camera.
4. Enter the default password 123456 and save the settings.
5. Later, the APP will request user to modify default password to private password .
6.
Open the advanced settings and enter the default admin password (123456). The APP will ask
you to change the admin password now. In advanced settings, go to Wi-Fi settings. Choose the
appropriate Wi-Fi router on your local network. The Camera will go offline for around 40
seconds to reboot for Wi-connection. When camera connects to Wi-Fi router correctly,
the RED
LED will stay ON.
Rj45 Connect
Power Adapter
Router
12
APP INTRODUCTION
Main Page
The MAIN PAGE section offers user an overview for all registered camera(s), including camera
status (connected/disconnected). User can quickly access the camera(s) in the list. When multiple
cameras are registered, scroll down to locate the registered camera for access.
The ADD CAMERA icon allows you to register additional camera(s) to the system. The
system supports up to 3 concurrent user connections.
In the CAMERA SETTING section you will allow to (1) congure system setting,
(2) unregister camera from the APP and (3) enter event list for recorded video le(s)
playback. Tap the CAMERA SETTING icon to enter/exit CAMERA SETTING.
(iOS)
(Android)
13
Tap the CAMERA SETTING icon. The following icons appear on the panel.
Tap the ADVANCED SETTING icon to setup camera conguration. (Please refer to
"Advanced Setting" for detail).
Tap the DELETE icon to remove the camera connection.
Tap the EVENT LIST icon to check or playback the recorded events. (Please refer to
"Playback Your Video" for detail).
The INFORMATION icon allows you to enable PIN lock, push notication function and
check the App information.
(iOS) (Android)
14
LIVE VIEW / SNAPSHOT / RECORDING
Tap to take snapshot image(s) of the video. The captured
snapshots will be stored in your mobile device.
Tap to turn ON/OFF the volume.
Tap to Start/Stop recording. The
recorded video le will be
stored in the memory card of your camera.
Tap to set/move camera to default postion
Tap to return to the main page.
15
Record the point
This function allows you to save a camera position. You're able to select the saved point so
the camera turns to this position. Follow the below instruction to set up.
1.Rotate the camera in live video mode to the point you want to record.
2.Tap
to enter the record the point.
3.Select the point you want to save.
Home
16
The APP allows users to have access to live video. Users can take snapshot image(s) and
record the live video.
If you’re using the indoor model, you can also choose the color tone according to the lighting
condition. By default, the APP applies the ‘indoor’ option with a warm-yellow color tone for the
indoor models. You can also choose the ‘outdoor’ option in the advanced setting for cool-
white color tone if it best fits your viewing environment. It is not necessary to change this setting
for outdoor models.
When you launch the App on the smart phone or tablet, the image displaying on the main screen
is the very last automatically captured snapshot from the live view of the previous established
session. Tap the image to enter the live view mode.
The controls and layout of the APP have been customized to meet the operating system
requirements of the mobile device. The main page may vary, depending on your mobile device. By
default, the live view is displayed in portrait mode. You can also turn the device sideways to switch
to landscape mode for a larger view.
Note:
Once the recording is started by motion detection or manually, the APP will continue the
recording for 1 minute. User cannot stop the recording during this period.
… 16 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Smartwares-CIP-39940

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Smartwares CIP-39940 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Smartwares CIP-39940 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Smartwares CIP-39940

Smartwares CIP-39940 Snelstart handleiding - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info