687058

Smartwares CIP-39940 Handleiding

32
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
Wireless Pan/Tilt APP Camera
Installation and Operating Instructions
Model: CIP-39940
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
1
CONTENTS
Overview ......................................................................................................... 2
Please Read Before You Start ..................................................................................3
Wireless Device Operating Range
............................................................................3
Important Safety Precautions
....................................................................................3
Getting Started ............................................................................................... 5
Kit Content ................................................................................................................ 5
Safety and Installation Tips
.......................................................................................6
Product Overview
.....................................................................................................7
LED Indicator ............................................................................................................ 8
Install Your Camera
..................................................................................................9
Setting up Your camera
...........................................................................................10
APP Introduction .......................................................................................... 12
Main Page ..............................................................................................................12
Live View / Snapshot / Recording
...........................................................................14
View Your Snapshots
..............................................................................................17
Playback Your Videos
.............................................................................................17
Advanced Setting ....................................................................................................23
Trouble Shooting ......................................................................................... 30
Product Specication
.................................................................................. 32
Storage Media Management ....................................................................... 33
2
OVERVIEW
The CIP-39940 camera is capable of delivering high quality Digital High Definition (HD) video to
your smart-mobile device(s), which would require higher internet bandwidth. Due to your local
internet environment condition, your mobile device(s) may display black-screen or temporary
disconnect to the CIP-39940 camera.
* Make sure the CIP-39940 camera is operating with sufficient internet bandwidth, 1Mbps
(upload/download speed) is suggested.
* For the best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile
network in order to receive maximum download speed.
* When the internet transmission is low, the APP will automatically switch to Relay
Mode:
‧ By adjusting to “Better Streaming” in the system setting section the APP
performance may improve.
* Your internet bandwidth is limited. For best performance, avoid more than two users
connecting to the CIP-39940 camera simultaneously.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual
core processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve range:
‧ Change router/camera relative position to receive better signal.
‧ Use wired Ethernet cable on the CIP-39940 camera to establish connection between
CIP-39940 camera and your router.
‧ Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
‧ Switch your router to 11b/11g mode in order to improve router service range.
‧ Purchase extension cable or high gain antenna for your camera from the CIP-39940
vendor.
* Please make sure the memory card used is CLASS10 rated.
3
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this operating manual will void the warranty!
We will
not assume any liability for damages to items or persons caused by improper
handling or non-
compliance with the safety notices! Any warranty claim will be null and
void in such cases.
1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be
voided.
2. Avoid all contact with water, ensure dry hands before using.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing
so
may
damage the camera or cause camera temporary malfunction.
5. Use the devices with care. Avoid pressing hard on the camera body.
6. For your own safety, avoid using the camera or power off the camera when there
is
a
storm or
lightning.
7. Remove the power adapter during long periods between usages.
8. Use only the accessories and power adapters supplied by the manufacturer.
9. To meet the regulations pertaining to parental responsibility, keep the devices out of
the reach of
infants.
10. Check power cables do not get crushed or damaged by sharp edges whenever the
devices
are in operation.
PLEASE READ BEFORE YOU START
Always use discretion when installing CCTV equipment, especially when there is
perceived policy.
Enquire relevant local regulations applicable to the lawful installation
of video recording/surveillance.
Third party consent may be required.
WIRELESS DEVICES OPERATING RANGE
Ensure the signal reception viewed from the wireless camera(s) is the best possible
reception
between the camera(s) and the Wi-Fi router. If necessary, reduce the
distance between the
camera(s) and the Wi-Fi router to improve overall system
performance. Wireless Color Camera
Recordable CCTV Kit operating on a secure
digital 2.4GHz frequency which could greatly reduce
interference from product such
as wireless routers, cordless phones or microwave ovens.
5
For best system performance:
- iOS: iPhone5 / iPad2 / Mini iPad with iOS 7.0 or above.
- Android: 1.5G dual core processor dual core procesor with 1G Ram or above.
- Storage: Class 10 memory card.
- Bandwidth: 1Mbps or above upload/download speed suggested.
Wireless App Camera
Camera Antenna
Hex Key
Screw Pack
Quick Start Guide
RJ45 Connect Jack
Power Adapter
x 1
x 1
x 1
x 1
x 1
x 1
Tools Required:
‧
Electric drill
‧
5mm masonry drill bit
‧
15mm masonry drill bit
‧
No. 2 Philips screwdriver
x 1
KIT CONTENT
6
SAFETY AND INSTALLATION TIPS
Do not attempt to open the units with the power adaptor plug connected to avoid any risk of
personal injury.
When installing CCTV camera(s), always follow manufacturer's advice when using power tools,
steps, ladders, etc. and wear suitable protective equipment (e.g. safety goggles) when drilling
holes. Before drilling holes through walls, check for hidden electricity cables and water pipes. The
use of cable/pipe detector is advisable.
To avoid exposing any cameras to extreme weather conditions (e.g., under a gutter which is prone
to any water leaks). When installing any cameras with this unit, to use cable conduit to protect any
video/power extension cables from being exposed externally and to prevent/reduce the chances of
the cables being tampered with. After drilling any hole though an external wall for a cable, ensure
the hole is sealed up around the cable using a sealant to prevent drafts.
To prevent a re or electrical shock hazard, do not attempt to open the housing while the unit is
exposed to rain, water or wet conditions. There are no user serviceable parts inside. Refer servicing
to qualied service personnel. Avoid pointing the camera(s) directly at the sun or any bushes, tree
branches or moving objects that might unnecessarily cause the camera to record.
7
PRODUCT OVERVIEW
Light Sensor
Antenna
Microphone
Reset Button
LENS
SD Card Slot
Rj 45 Connect
Power Adapter
Router
Mount Bracket
Camera
Interface Connection
Note:
Press and hold the “Reset” button for 5 seconds. All settings are restored to the factory
default.
8
LED INDICATOR
STATUS DESCRIPTION
Power On Power on the camera and wait until the RED LED indicator
becomes steady on. This process would be finished within 45
seconds and make sure the LED is ashing in RED.
Soft AP RED LED ashes once followed by 2 short ashes.
Reset factory under Soft AP RED LED ashes quickly
Default Reset RED LED ashes quickly
Update Firmware RED LED ashes quickly
Start Recording Video RED LED ashes once
9
Install Your Camera
1. Drill the mounting holes by using the alignment paper.
2. Insert the 4 screw anchors into the wall.
3. Insert the 4 screws into the screw anchors and reserved space 8 to 10 mm .
4. Hang the camera on the 4 screws, then fasten 4 screws by using hex key.
1 2
43
Note:
Before mounting the camera, install the memory card if you prefer recording video to local
storage.
10
2. Power on the camera
Connect the power wires to the adapter supplied, and wait until the RED LED indicator becomes
steady on. This process would be finished within 1 min and make sure the LED stops
flashing in RED.
3a.Wireless Connection
(1) In the Wi-Fi setting of your smart device. Choose the Wi-Fi router with prefix of HD-xxxxxx
(xxxxxx=Camera ID numbers). Then enter the default password 12345678.
(2) Launch the APP, tap to add the camera.
(3) Tap (QR code icon) and scan the QR code label on the back of the camera to bring up the DID
information. Or tap “Search” to locate the camera.
(4) Enter the default password 123456.
(5) Tap “Save” when you done.
(6) Later, APP will request user to modify the default password to private password .
For iOS For Android
Setting up Y
our Camera
Follow the instructions below to help congure your camera for initial use.
1. APP download
Download and install the "Smartwares view" APP to your device.
(iOS) (Android)
11
3b.Wired Connection
1. Make sure your smartphone is connected your Wi-Fi router.
2. Connect the camera’s Ethernet cable to the Rj45 connect. The other side, connect to the Wi-Fi
router, and power on the camera with adapter.
3. Launch the APP, tap “Search” to locate the camera.
4. Enter the default password 123456 and save the settings.
5. Later, the APP will request user to modify default password to private password .
6.
Open the advanced settings and enter the default admin password (123456). The APP will ask
you to change the admin password now. In advanced settings, go to Wi-Fi settings. Choose the
appropriate Wi-Fi router on your local network. The Camera will go offline for around 40
seconds to reboot for Wi-connection. When camera connects to Wi-Fi router correctly,
the RED
LED will stay ON.
Rj45 Connect
Power Adapter
Router
12
APP INTRODUCTION
Main Page
The MAIN PAGE section offers user an overview for all registered camera(s), including camera
status (connected/disconnected). User can quickly access the camera(s) in the list. When multiple
cameras are registered, scroll down to locate the registered camera for access.
The ADD CAMERA icon allows you to register additional camera(s) to the system. The
system supports up to 3 concurrent user connections.
In the CAMERA SETTING section you will allow to (1) congure system setting,
(2) unregister camera from the APP and (3) enter event list for recorded video le(s)
playback. Tap the CAMERA SETTING icon to enter/exit CAMERA SETTING.
(iOS)
(Android)
13
Tap the CAMERA SETTING icon. The following icons appear on the panel.
Tap the ADVANCED SETTING icon to setup camera conguration. (Please refer to
"Advanced Setting" for detail).
Tap the DELETE icon to remove the camera connection.
Tap the EVENT LIST icon to check or playback the recorded events. (Please refer to
"Playback Your Video" for detail).
The INFORMATION icon allows you to enable PIN lock, push notication function and
check the App information.
(iOS) (Android)
14
LIVE VIEW / SNAPSHOT / RECORDING
Tap to take snapshot image(s) of the video. The captured
snapshots will be stored in your mobile device.
Tap to turn ON/OFF the volume.
Tap to Start/Stop recording. The
recorded video le will be
stored in the memory card of your camera.
Tap to set/move camera to default postion
Tap to return to the main page.
15
Record the point
This function allows you to save a camera position. You're able to select the saved point so
the camera turns to this position. Follow the below instruction to set up.
1.Rotate the camera in live video mode to the point you want to record.
2.Tap
to enter the record the point.
3.Select the point you want to save.
Home
16
The APP allows users to have access to live video. Users can take snapshot image(s) and
record the live video.
If you’re using the indoor model, you can also choose the color tone according to the lighting
condition. By default, the APP applies the ‘indoor’ option with a warm-yellow color tone for the
indoor models. You can also choose the ‘outdoor’ option in the advanced setting for cool-
white color tone if it best fits your viewing environment. It is not necessary to change this setting
for outdoor models.
When you launch the App on the smart phone or tablet, the image displaying on the main screen
is the very last automatically captured snapshot from the live view of the previous established
session. Tap the image to enter the live view mode.
The controls and layout of the APP have been customized to meet the operating system
requirements of the mobile device. The main page may vary, depending on your mobile device. By
default, the live view is displayed in portrait mode. You can also turn the device sideways to switch
to landscape mode for a larger view.
Note:
Once the recording is started by motion detection or manually, the APP will continue the
recording for 1 minute. User cannot stop the recording during this period.
17
VIEWING YOUR SNAPSHOTS
For iOS
Your snapshots will be named with the time stamp and saved into the Camera Roll location
of your mobile device.
For Android
Your snapshots will be named with the time stamp and saved into the Photo Gallery >
snapshot folder on your mobile device.
PLAYBACK YOUR VIDEOS
The recorded video le(s) on your camera is automatically saved to the memory card inserted in
your camera. You can remotely access the le(s) for playback via your mobile device.
Tap the CAMERA SETTING icon on the main page.
(iOS) (Android)
18
Tap EVENT LIST icon and the Date-Time filter will appear. User may define the period
for system to display all available recorded file(s) for playback.
During the playback, you can tap the PAUSE icon to pause / resume the video, MUTE to
deactivate/activate the audio function and GO BACK icon to return to the event list section.
You may also review recorded video le(s) with your PC. For best performance, please use
“Free Video Converter” from http://www.freemake.com/free_video_converter/, or Video LAN
from http://www.videolan.org/. The video is using FFmpeg codes and is H.264 compression
method.
1.Tap to pause/play video
2.Tap to view full screen
User’s local network environment condition (example: upload/download speed) may cause
improper video playback (black screen), when it happens, please leave the playback mode
and try again at later time.
APP layout may vary depending on the display panel size of your mobile devices. Please
refer to the release note from the APP Store/Google Play for more details.
20160315023316.mp4
NMMBVWQN=^j` ~ê ê áÉê
00:02 00:58
19
This function helps user to easily transfer the recorded file(s) from the memory card. It is strongly
suggested to download the file(s) at your home Wi-Fi network (WLAN), meaning the mobile
device(s) is connecting to the same Wi-Fi router as the camera. Minimum bandwidth requirment is
1Mbps (upload/download). Download process may be force stopped if the bandwidth becomes too
slow and cannot continue.
Delete
First select the le(s) by tapping the le name, following by taping on the Trashcan icon
to delete selected le(s) Multiple les can be selected for delete.
Note:
For Android system, please use "MX Player" APP for playback
downloaded video le(s).
You can nd "MX Player" from Google Play
(free of charge).
If you are experiencing scattering video image, please switch the
decoder function of the
MX Player to "S/W Decoder".
Note:
For iOS system, please use "Oplayer Lite" APP for playback downloaded video les(s).
You can nd "Oplayer Lite" from App Store (free of charge)
Check the video clip
Then tap the trash can icon
20
To Download
/
Delete the video le(s) in the EVENT LIST section, please follow the steps below:
Download
Long press the video clip to download the file onto your mobile device.
Note:
During the download process, system will stop both the live view and recording
functions. APP will automatically inform any user accessing the camera that
the system is busy and the connection has been terminated.
21
Setup PIN Lock
If you enable PIN Lock, the user will be asked to enter the PIN code when you launch the APP.
1. Enable the “Enable lock when starting” function. Then enter your PIN code.
2. Conrm your PIN code again.
(iOS) (Android)
Note:
If you forgot your PIN code, please uninstall the APP and reinstall it on the mobile device.
Notify (Push Notification)
The
CIP-39940 camera supports motion detection function. When any event is detected in the
camera site, you’ll receive push notification on the mobile devices for the event recognized by the
camera.
For iOS
1. If you want to enable/disable it, follow the steps on your iOS mobile device:
2. Tap Notifications.
Note:
It takes time for the changes to take effect in iOS, normally within 2 hours.
22
For Android
If you want to enable/disable it, please follow the steps below.
About app/API Version Info
Tap the ABOUT icon to check the APP Version when necessary.
Note:
The internet connection and wireless network interference may inuence the performance
of push notication service.
Note:
The internet connection and wireless network interference may inuence the performance
of push notication service.
(iOS) (Android)
23
ADVANCED SETTING
This chapter explains the advanced settings for administrator. Administrator is the one who
owns the administration password and has the full control to the CIP-39940
camera. The
administrator can access all CIP-39940 functions and settings, while general users can receive
the surveillance images for live view/screen capture/video recording and may not manage the
camera settings.
Admin Password The security code required to enter Advanced Setting for system setting
management
IP Cam Name Give your camera a name
Time Zone
Set up the appropriate time zone
Device Security Code The password required for remote access
Video Setting Congure the video quality and local power frequency
Wi-Fi Setting Manage your Wi-Fi Network
Sensitivity Setting
Set up the camera sensitivity for motion detection
Motion Mask Use quick de-select and/or tap screen.
TimeStamp Select a color for the tab of time
Email Setting
Set up your email account for E-mail alert
SD Card Setting Format the SD card
Device Information Check the App and API Kernel version
Note:
It may take more than one minute for some routers to update the registered
devices. When you complete advanced settings and return to device list, please wait for
a while allowing your router to nish the camera registration.
24
Admin Password
The Admin Password is a specic security code for administrator to change the advanced settings.
The default admin password is 123456.
Please use this function to change the default admin password into your personal admin password.
For the protection of your system conguration, every time you change the advanced settings, you
need to enter the admin password. Please change the admin password periodically.
IP Cam Name
Name and change your camera's name.
Time Zone
The drop-down list shows the world time zone. Select the time zone that will work best for you. If
your date/time is during the daylight saving time period, please check the Daylight Saving box to
adjust the system time properly.
Device Security Code
The Device Security Code is a speci
c security code to access the camera.
The default password of the camera is 123456. Use this function to change the default password
into your personal security code.
1. Type in the old password.
2. Type in the new password and conrm the new password again.
3. Tap OK to save the setting.
Note:
If you forget your admin password, press and hold the reset button for 5 seconds,
all s
ettings will restore to factory default. You will need to configure your camera from
the start.
Note:
1. Change password in system information page accordingly.
2. If you forget the Device Security Code, press and hold the reset button for 5 seconds to
reset the system to factory default. All settings will restore to factory default. You will
need to congure your camera from the start.
25
Video Settings
This section allows you to congure the video quality and environment mode.
Video Quality
The Video Quality setting s
ection allows you to adjust the quality of the video streaming.
By selecting better video image will allow you to view high resolution image. By selecting
'better streaming' the video will be displayed more smoothly (quality depends on local
internet environment).
Only select better image when you have sufficient bandwidth and updated mobile device(s). Please
refer to P.4 for system requirement.
Environment Mode
The Environment Mode settings allows you to select the power line frequency used at the location
of
CIP-39940 camera. The power line frequency varies depending on geographic region. It may
cause image flicker if wrong frequency is selected. Please check with local authorities for proper
setting.
There are two type video color tone, user can change the video color tone between warm-
yellow(indoor) and cool-white (outdoor).
Low Light Enhancement
The Low Light Enhancement Mode is for improving the night view video image by providing 5
levels to select from (5 = brightest).
26
Wi-Fi Setting
The Wi-Fi setting allows you to choose the wireless connection and set up the Wi-Fi environment.
When y
ou tap the “Manage Wi-Fi network” button, the system automatically scans the nearby
network and shows the available Wi-Fi routers in the drop-down list. Choose the appropriate Wi-Fi
router and enter the Wi-Fi router password if necessary. Due to security concerns, it is suggested
to use the WPA/WPA2/ WPA2-PSK protocol for Wi-Fi network.
Sensitivity Setting
This denes the camera parameter for motion detection.
Detection Mode
PIR is hardware-based biomass detection.
SOFTWARE use advance software analysis to trigger motion alarm.
Motion Detection (available for Software Mode ONLY)
HIGH – Suitable for detecting smaller object(s) within 5 to 6 meters
LOW – Suitable for detecting larger object(s) within 3 to 5 meters
Note:
1. When the Wi-Fi connection is completed and you unplug the Ethernet cable, the camera
will reboot and it will take several minutes to establish the connection. Please re-launch
the APP when you see the green signal indicator lights up.
2. The CIP-39940
camera is designed to work with the legal Wi-Fi channels in your region.
Please refer to your Wi-Fi router manual to choose an appropriate channel for
CIP-39940 camera.
3. If camera fails to connect to the Wi-Fi router, please hold down reset button for 2
seconds to reset the system and repeat register process again.
Note:
The HIGH/LOW setting for Motion Detection only takes effect when user chooses
SOFTWARE in detection Mode.
27
MOTION MASK
This fu
nction allows you to quickly select motion mask from 3 default model. In addition, the user
is able to tap screen which area you don’t want to be detected.
1. Tap the area where you don’t want to detect the
motion.
2. 3 icons for quick tapping of bar area.
3. Reset button.
4. Save setting.
TIMESTAMP
This section allows you to change the time stamp background color. Drag and drop where
you want to place the time stamp.
1. The time stamp locates at the corner where you
tap.
2. Tap to change the time stamp background color.
1
1
2
2
3
4
28
Email Setting
The email setting allows you to configure the email environment, email account and password.
Gmail account is suggested.
Click the “Use SSL” check box will transmit the data in encryption. This setting requires the Simple
Mail Transfer Protocol (SMTP) conguration. Most ISPs use the SMTP method to transfer outbound
mail via the internet. Only use the SMTP that supports SSL.
Gmail Setting (suggested)
SMTP Server smtp.gmail.com Enter the gmail SMTP server
SMTP Port 465 Enter the SMTP port 465
Username XXX@gmail.com Enter your email address
Password XXXXXXXX Enter the password for this gmail account
Email to XXX@gmail.com Enter the email address for the recipient who
receives the email alert.
29
SD Card Setting
Formatting your memory card will ERASE all the data from it and you will not be able to get the
data back. Please back up your video les BEFORE formatting the memory card.
Overwrite SD Card
This function will overwrite the oldest files when the micro memory card is full. Turning on this
function will enable the system to start overwriting the old les when the available memory card
capacity is not enough. This ensures the most up to date video recordings can be saved so that
you won’t miss any important information.
Device Information
This section shows the device information about the camera, including device version, total size
and available size of the memory card.
Note:
The system is optimized to Class 10 memory card. Memory card with lower specication
will decrease the recording and playback function efciency.
During format process, all recording & viewing will stop until format process completes.
Note:
You will want to reformat
the memory card from time to time to ensure the condition of
the storage device. Your camera system will not work properly if the memory card
becomes corrupted.
30
TROUBLE SHOOTING
IF SOLUTION
The APP can not find
the camera
‧
Make sure your network supports the DHCP
protocol.
‧
Make sure the camera and your mobile device
connect to the
same Wi-Fi router for the rst
setting.
‧
Make sure the Wi-Fi router is activated.
‧
Make sure the camera is properly powered on.
‧
Use the “ADD CAMERA” function to
manually add the camera.
Wi-Fi router is not
shown
in the drop
down list
‧
Make sure SSID broadcasting function is
enabled in the Wi-
Fi router. Consult your
Wi-Fi router manufacturer for the settings if
necessary.
‧
Change the wireless security protocol of your
Wi-Fi router into
WPA/WPA2/WPA2-PSK.
Due to security concerns, WEP protocol
is not
suggested for some Wi-Fi routers.
No image appears
‧
Make sure the power adaptor is not damaged
or defective and
plugged into an electrical
outlet with power.
‧
Relocate the camera to obtain the best
reception of wireless
signals.
‧
Make sure the camera is properly congured in
App.
‧
Make sure the mobile device is connected to
3G/4G/Wi-Fi
properly.
Low wireless
signal
Poor image quality
‧
Wireless devices such as wireless home stereo
system may
reduce the signal strength. Leave
as much space as possible
between the
camera/mobile device and these wireless
devices.
‧
Clean the camera lens using lens cleaning
cloth. Spots or dust on
the lens can also cause
image quality problems.
Motion detection is
not working or
over-react
‧
Make sure the sensitivity setting is turned ON (please refer to the
Sensitivity Setting section).
‧
In motion detection mode, a moving object within the camera
viewing angle is necessary to trigger the motion sensor for
recording
Note:
WPA/WPA2/WPA2-PSK encryption protocols are newer and
more effective security standards for wireless networks than
the older and less-secure WEP protocol.
31
The APP can not
record any video clips
‧
Make sure the SD card has been correctly inserted
‧
Make sure the motion detection function has been enabled. (please
refer to the Sensitivity Setting section).
‧
Please format the SD card when it is used for the rst time (please
refer to the SD Card Format section)
‧
Make sure you are using Class 10 rated memory card.
Email alert is not
working
‧ Make sure the email alert function is enabled (please refer to the
Email Alert section).
‧ Gmail account is suggested for the email alert function. Make sure
you have setup the system configuration as suggested in the
Email Alert section.
‧ Make sure the email address is entered correctly.
Bright white spots appear
at night time
‧ The camera's infrared LEDs produce invisible light that reflects off
surfaces such as glass. Install the camera on the other side of
windows or place the lens flush against the surface to improve the
night vision. It is suggested to install camera(s) under well-lit area.
Memory card error
‧
Make sure the memory card is correctly inserted and formatted.
‧
Use the provided memory card within the package to ensure
proper operation.
‧
Make sure your are using Class 10 rated memory card.
Note:
Please check the environment rating (Ingress) of the
camera(s) before installing outdoors.
Note:
Please backup the data before formatting. Format function
will erase all the data on the memory card.
Wrong data and time are
shown
‧ Wrong date and/or time will result in unexpected record schedule.
Make sure you’ve selected the correct time zone (please refer to
the Time Zone section).
‧ Confirm the system date/time of the mobile device to ensure
correct operation.
‧ System will clock itself when connect to the internet. Make sure
the system is connected properly to the internet. You may use
your
mobile device to access the system to see if remote view is
functioning properly.
32
PRODUCTION SPECIFICATION
Networking Parameter
Wireless Technology IEEE 802.11 b/g/n
Network Connection Ethernet (10/100 Base-T/Base -TX); Wi-Fi
Network Protocols TCP/IP, UDP, SMTP, NTP, DHCP, ARP
Simultaneous Viewers 3 concurrent sessions
Security WPA /WPA2/WPA2-PSK (TKIP, 128 bit AES)
Camera Parameter
Image Sensor 2 MegaPixel, 1/2.7” CMOS
Antenna 3dBi Dipole
Environment Rating (Ingress) IP66
Light Source Environment Indoor (50Hz/60Hz)
Local Storage Micro SD Card up to 128GB(not included in the package)
Pan/Tilt Pan: 270° (9.74° each step )
Tilt: 90° (9.56° each step)
Viewing angle H: 90°, V: 45°±3°
Lens 4.0mm±5%mm
Min. Illumination 1~8 lux
Number of LEDs 12 IR LEDs with IR switcher
IR Distance 8 to 10 meters
Video Audio Parameter
Image Compression H.264
Image Resolution Full HD 1920x1080P
Recording Frame Rate Up To 30 FPS
Supported Mobile Device
iOS requirement
iPhone 5S/iPad air with iOS 9.0 or Above
Android requirement Android 4.4X or above
Hardware requirement 1.5GHz dual core or above
1GB or above internal memory
General Parameter
Power Requirements 100~240V switching power supply DC 5V 1.5A
Operating Temperature -10°C~+50°C
33
STORAGE MEDIA MANAGEMENT
Micro SD Card Capacity
(Class 10)
Full HD Video
8G 340 Events
32G 1300 Events
64G 2700 Events
128G 5500 Events
… 32

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Smartwares-CIP-39940

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Smartwares CIP-39940 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Smartwares CIP-39940 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Smartwares CIP-39940

Smartwares CIP-39940 Snelstart handleiding - Alle talen - 1 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info