590787
15
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
Wireless APP Camera
Installation and Operating Instructions
Model: C733IP10.021.37
Version 1.0
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS
PRODUCT
AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
The state of art WAPP camera is capable of deliver high quality Digital High Defi (HD) video to
your smart-mobile device(s), which would require higher internet bandwidth. Due to your
local internet environment condition, your mobile device(s) may display black-screen or
temporary disconnect to the WAPP camera.
* Make sure the WAPP camera is operating with suffi internet bandwidth, 1Mbps (upload/ download
speed) is suggested.
* For best performance, the smart-mobile device(s) need to be on Wi-Fi or 4G mobile network
in order to receive maximum download speed.
* When the internet transmission is low, your WAPP APP will automatically switch to Relay Mode:
By adjusting to “Better Streaming” in the system setting section may improve
the WAPP APP performance.
* Your internet bandwidth is limited. For best performance, try to avoid more than two users
connecting to the WAPP camera simultaneously.
* Make sure your smart-mobile device(s) is equipped with up-to-date technology, 1.5GHz dual core
processor or equivalent is suggested.
* If the signal strength of your Wi-Fi router is weak, there are several ways to improve
transmission:
Change router/camera relative position to receive better signal.
Use wire Ethernet cable on the WAPP camera to establish connection between WAPP
camera and your router.
Use Wi-Fi repeater/extender to maximize the service range of your Wi-Fi route.
Switch your router to 11b/11g mode in order to improve router service range.
Purchase extension cable or high gain antenna for your camera from the WAPP
vendor.
* Please make sure the memory card used is CLASS10 rated.
2
CONTENTS
INTRODUCTION 2
WIRELESS DEVICES OPERATING RANGE 2
IMPORTANT SAFETY PRECAUTIONS 2
KIT
CONTENT 4
SAFETY AND INSTALLATION TIPS
5
NIGHT VISION 6
CAMERA INSTALLATION
6
CAMERA OVERVIEW
7
DOWNLOAD AND SETUP THE APP
8
LIVE VIEW / SNAPSHOT / RECORDING 11
VIEWING YOUR SNAPSHOTS 12
PLAYBACK YOUR VIDEOS 12
MAIN PAGE OVERVIEW 16
ADVANCED SETTING 21
ADMIN PASSWORD 22
EMAIL ALERT 22
TIME ZONE 23
DAYLIGHT SAVING 23
DEVICE SECURITY CODE 23
VIDEO SETTINGS 23
WI-FI SETTING 24
SENSITIVITY SETTING 25
EMAIL SETTING 25
SD CARD SETTING 26
OVERWRITE SD CARD 26
PROFILE SETTING 26
DEVICE INFORMATION 26
TROUBLE SHOOTING
27
PRODUCT SPECIFICATION 30
STORAGE MEDIA MANAGEMENT 31
1
INTRODUCTION
PLEASE READ BEFORE YOU START
Always use discretion when installing CCTV equipment, especially when there is
perceived policy. Enquire relevant local regulations applicable to the lawful
installation of video recording/surveillance. Third party consent may be required.
WIRELESS DEVICES OPERATING RANGE
Ensure the signal reception viewed from the wireless camera(s) is the best
possible reception between the camera(s) and the Wi-Fi router. If necessary,
reduce the distance between the camera(s) and the Wi-Fi router to improve
overall system performance. Wireless Color Camera Recordable CCTV Kit
operating on a secure digital 2.4GHz frequency which could greatly reduce
interference from product such as wireless routers, cordless phones or
microwave ovens.
IMPORTANT SAFETY PRECAUTIONS
Damages caused by non-compliance with this operating manual will void the warranty!
We will not assume any liability for damages to items or persons caused by improper
handling or non-compliance with the safety notices! Any warranty claim will be null and
void in such cases.
1. Do not drop, puncture or disassemble the camera; otherwise the warranty will be
voided.
2. Avoid all contact with water, and dry hands before using.
3. Never tug on the power cords. Use the plug to unplug it from the wall outlet.
4. Do not expose the camera to high temperature or leave it in direct sunlight. Doing so
may damage the camera or cause camera temporary malfunction.
5. Use the devices with care. Avoid pressing hard on the camera body.
6. For your own safety, avoid using the camera or power off the camera when there is a
storm or lightning.
7. Remove the power adapter during long periods between usages.
8. Use only the accessories and power adapters supplied by the manufacturer.
9. To meet the regulations pertaining to parental responsibility, keep the devices out of
the reach of infants.
10. Check power cables, do not get crushed or damaged by sharp edges whenever
the devices are in operation.
2
FCC Compliance Statement: This
device complies with Part 15 of the
FCC rules. Operation is subjected
to the following two conditions: (1)
this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Products with CE Marking comply with
EMC Directive (2004/108/EC); Low
Voltage Directive (73/23/EEC);
R&TTE(1999/5/EC); ROHS Directive
(2011/65/EU) issued by the Commission of the
European Community. Compliance with these
directives implies conformity to the following
European Norms: EMC: EN 301 489
LVD: EN 60950
Radio: EN 300 328
FCC/CE WARNING
This equipment has been tested and found to comply with limits for a Class B digital
device, pursuant to Part 15 of the FCC rules and ETSI(EN) 300328. These limits are
designed to provide reasonable protection against harmful interference in residential
installations. This equipment generates, uses, and can radiate radio frequency energy, and
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does interference to radio or
television equipment reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures: -Reorient or relocate the receiving antenna.-Move the equipment
away from the receiver.-Plug the equipment into an outlet on a circuit different from that
to which the receiver is connected.-Consult the dealer or an experienced radio/television
technician for additional suggestions. You are cautioned that any change or modifications
to the equipment not expressly approved by the party responsible for compliance could
void your authority to operate such equipment.
DISPOSAL
If the camera system no longer functions or can no longer be repaired, it
must be disposed of according to the valid statutory regulations. Disposal
of spent batteries/accumulators:
You are required by law (Battery Ordinance) to return all spent batteries
and accumulators. Disposing of spent batteries/accumulators with common household
waste is prohibited! Batteries/accumulators that contain hazardous substances are marked
with the symbols on the side. These symbols indicate that it is prohibited to dispose of
these batteries/accumulators in the household waste. The abbreviations for the respective
heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead. You can return spent batteries and
accumulators that can no longer be charged to the designated collection points in your
community, outlets or wherever batteries or accumulators are sold. Following these
instructions will allow you to fulfill the legal requirements and contribute to the protection of
our environment!
3
KIT CONTENT
Tools Required:
Electric drill
5mm masonry drill bit
15mm masonry drill bit
No. 2 Philips screwdriver
For best system performance:
-
iOS: iPhone5 / iPad2 / Mini iPad with iOS 7.0 or above.
-
Android: 1.5G dual core processor dual core procesor with 1G Ram or above.
-
Storage: Class 10 memory card.
-
Bandwidth: 1Mbps or above upload/download speed suggested.
Screw Pack x 1
Quick Start Guide
x 1
Ethernet cable
x 1
Power Adapter
x 1
Wireless App Camera
x 1
4
SAFETY AND INSTALLATION TIPS
Do not attempt to open the units with the power adaptor plug connected to avoid
any risk of personal injury.
When installing CCTV camera(s), always follow manufacturer's advice when
using power tools, steps, ladders, etc. and wear suitable protective equipment
(e.g. safety goggles) when drilling holes. Before drilling holes through walls,
check for hidden electricity cables and water pipes. The use of cable/pipe
detector is advisable.
It is also advisable to avoid exposing any cameras to extreme weather
conditions (e.g., under a gutter which is prone to any water leaks). When
installing any cameras with this unit, it is advisable to use cable conduit to
protect any video/power extension cables from being exposed externally and
to prevent/reduce the chances of the cables being tampered with. After drilling
any hole though an external wall for a cable, ensure the hole is sealed up
around the cable using a sealant to prevent drafts.
To prevent a fire or electrical shock hazard, do not attempt to open the
housing while the unit is exposed to rain, water or wet conditions. There are
no user serviceable parts inside. Refer servicing to qualified service
personnel. Avoid pointing the camera(s) directly at the sun or any bushes, tree
branches or moving objects that might unnecessarily cause the camera to
record
.
NIGHT VISION
The camera has built-in infrared LEDs to allow you to view at night for 24-hour
surveillance. The LEDs will automatically activate at night and the picture viewed will turn
to black and white. The night viewing range is up to 5 meters.
CAMERA INSTALLATION
ALTERNATIVE INSTALLATIONS
1. Secure the camera stand on a stable surface
2. Loosen up the thumb screw.
3. Adjust proper view angle, then secure the joint with T-bolt.
6
CAMERA OVERVIEW
Micro SD
Infrared
LEDs
PIR Reset
Lan Port Power
LINK LED Microphone Light Sensor
DOWNLOAD AND SETUP THE APP
The Wireless APP camera is designed to deliver live video footage directly to your smart
phone or tablet device. Please follow these steps to download, setup and use the APP.
APP Name: OMGuard HD
Download the App
1. From you smart phone or tablet device, click the APP Store/Google Play and search for
“OMGuard HD”.
2. Once located the APP, select download.
3. Once download completed, you will find the APP icon on your mobile device screen.
APP Setup
BEFORE YOU START
Before connecting the camera to power source,
first connect the camera to your Wi-Fi router
by using only the Ethernet cable provided.
After the camera is connected to the Wi-Fi router, connect the camera to power source and
wait until GREEN LED begin flashing. DO NOT begin the setup process until wait until
GREEN LED begin flashing. LEDs become steady on (roughly 45 seconds).
Please follow the steps in the following pages to complete the setup.
8
APP Setup
1. Make sure the mobile device you are using is connected to the same Wi-Fi router the
camera is connected to.
2. Locate the “OMGuard HD” icon in your mobile device and launch the App.
3. Tap the ADD CAMERA icon to add a new camera. Then click the SEARCH
button for a
quick setup. The APP will search available camera(s) connecting to the Wi-Fi
router and
display the camera information in the pop up list. Select the camera from the list and the
APP will automatically add the camera’s DID code to the DID column. Enter the default
password 123456.
(iOS)
(Android)
4.
Click SAVE to complete the camera settings. The system confirms the user identity and
grants
permission to user access.
5. You can refer to "ADD CAMERA" section for detail on adding additional camera(s).
In most cases, you can successfully add the camera according to the steps above.
However, the camera will not find the network if Wi-Fi router turns off the SSID
broadcasting function. Please enable the SSID broadcasting to complete the settings.
Note:
After you have entered the default password, the APP will remind you to
change the default password.
9
Note: Most Wi-Fi routers broadcast the Service Set Identifier (SSID) by default. This
is the name of your wireless network, and SSID broadcasting is how Wi-Fi-enabled
devices find networks.
The camera will only accept SSID composed with English alphabet charactors and
arebic numbers, none-English and special charactors (!@#$%, ect.) will not be
accepted.
10
LIVE VIEW / SNAPSHOT / RECORDING
Tap to take snapshot image(s) of the video.
The captured snapshots will be stored in
your mobile device.
Tap to turn ON/OFF the volume.
Tap to Start/Stop recording. The recorded
video file will be stored in the memory card of
your camera.
Tap and hold the icon to send the voice to
remote device (Push To Talk)
Tap to return to the main page.
The APP allows users to have access to live video. User can take snapshot image(s) and
record the live video.
When you launch the App on the smart phone or tablet, the image displaying on the main
screen is the very last automatically captured snapshot from the live view of the previous
established session. Tap the image to enter live view mode.
The controls and layout of the APP have been customized to meet the operating
system requirements of the mobile device. The main page may vary, depending on your
mobile device. By default, the live view is displayed in portrait mode. You can also turn the
device sideways to switch to landscape mode for a larger view.
Note: Once the recording is started by motion detection or manually, the APP will
continue the recording for 1 minute. User cannot stop the recording during this period.
11
VIEWING YOUR SNAPSHOTS
For iOS
You snapshots will be named with the time stamp and saved into the Camera Roll location
of your mobile device.
For Android
You snapshots will be named with the time stamp and saved into the
Photo Gallery > snapshot folder on your mobile device.
PLAYBACK YOUR VIDEOS
The recorded video file(s) on your camera is automatically saved to the memory card
inserted in your camera. You can remotely access the file(s) for playback via your mobile
device.
Tap the CAMERA SETTING icon on the main page.
(iOS) (Android)
12
Tap EVENT LIST icon and the Date-Time filter would appear. User may
define the period for system to display all available recorded file(s) for
playback.
During the playback, you can tap the PAUSE icon to pause / resume the
video, MUTE to deactivate/activate the audio function and GO BACK icon
to return to the event list section. You may also review recorded video
file(s) with your PC. For best performance, please use “Free Video
Converter” from http://www.freemake.com/free_video_converter/, or Video
LAN from http://www.videolan.org/.
The video is using FF mpeg codes and is H.264 compression method.
User’s local network environment condition (example: upload/download
speed) may cause improper video playback (black screen), when it happens,
please leave the playback mode and try again at later time.
APP layout may vary depending on the display panel size of your mobile
devices. Please refer to the release note from the APP Store/Google Play
for more details.
13
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Smartwares C733IP bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Smartwares C733IP in de taal/talen: Engels als bijlage per email.

De handleiding is 1,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Smartwares C733IP

Smartwares C733IP Installatiehandleiding - Nederlands - 2 pagina's

Smartwares C733IP Gebruiksaanwijzing - Nederlands - 31 pagina's

Smartwares C733IP Installatiehandleiding - Deutsch, English, Français, Italiano, Espanõl, Polski, Türkiye - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info