758357
14
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Recommendations for cutting
Ascroll saw is basically a curve-cutting machine. It can
also be used for straight cutting and beveling or angle
cutting operations. Please read and understand the fol-
lowing items before attempting to use the saw.
1. When feeding the workpiece into the blade do not
force it against the blade. This could cause blade deflec-
tion. Allow the saw to cut the material by guiding the
workpiece into the blade as it cuts.
2. The blade teeth cut material ONLY on the down
stroke.
3. Guide the wood into the blade slowly because the
teeth of the blade are very small and remove wood only
on the down stroke.
4. There is a learning curve for each person using this
saw. During that period of time it is expected that some
blades will break until you learn how to use the saw.
5. Best results are achieved when cutting wood one inch
thick or less.
6. When cutting wood thicker than one inch, guide the
wood very, very slowly into the blade and take extra care
not to bend or twist the blade while cutting in order to
maximize blade life.
7. Teeth on scroll saw blades wear out and the blades
must be replaced frequently for best cutting results.
Scroll saw blades generally stay sharp for 1/2 hour to 2
hours of cutting.
8.To get accurate cuts, be prepared to compensate for
the blade's tendency to follow the wood grain as you are
cutting.
9. This scroll saw is primarily designed to cut wood or
wood products. For cutting precious and non-ferrous
metals, the variable control switch must be set at very
slow speeds.
10. When choosing a blade, use very fine, narrow blades
to scroll cut in thin wood 1/4" thick or less. Use wider
blades for thicker materials but this will reduce the ability
to cut tight curves.
11. Blades wear faster when cutting plywood or very
abrasive particle board. Angle cutting in hardwoods
wears blades down faster.
12. Always use the foot to keep workpiece against table.
It must be set just above the workpiece for free scrolling
allowance, leaving no more than a gap of 1/16 inch
between the foot and workpiece.
Basic Scroll Saw Operations
14.
ON/OFF switch (Fig. 16)
1. To turn the saw ON, move the switch (1) to the (ON)
position.
2. To turn the saw OFF, move the switch to the (OFF)
position.
3. To lock the switch in the OFF position: a. Wait until the
saw has come to a complete stop.
b. Remove the safety key (2) from the switch housing.
Store the safety key in a safe place.
4. To unlock the switch and turn the saw ON, insert the
safety key into the switch, and move the switch to the
ON position.
Variable Speed Dial (Fig. 16)
1. Your saw is equipped with a variable speed dial (3).
The blade stroke rate may be adjusted by simply rotat-
ing the dial.
To increase speed, rotate dial (3) clockwise.
To reduce speed, rotate dial (3) counterclockwise.
2
FIG. 16
1
3
SM 2610957121 05-08 6/5/08 7:35 AM Page 14
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 3335-01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 3335-01 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 3,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info