38870
21
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
Wireless LAN
Access Point: Default setting is set to Activated. If you do not have any
wireless, 802.11g or 802.11b, device in your network, select Deactived.
SSID: The SSID is the unique name of a wireless access point (AP) to be
distinguished from another. For security propose, change the default Sitecom to
a unique ID name to the AP which is already built-in to the router’s wireless
interface. It is case sensitive and must not excess 32 characters. Make sure your
wireless clients have exactly the SSID as the device, in order to get connected to
your network.
Broadcast SSID: Select Yes to hide the SSID in so a station cannot obtain the
SSID through passive scanning. Select No to make the SSID visible so a station
can obtain the SSID through passive scanning.
Channel ID: The range of radio frequencies used by IEEE 802.11b/g wireless
devices is called a channel. Select a channel from the drop-down list box.
Authentication Type: To prevent unauthorized wireless stations from accessing
data transmitted over the network, the router offers highly secure data
encryption, known as WEP&WPA. If you require high security for transmissions,
there are three alternatives to select from: 64-bit WEP, 128-bit WEP, and
WPA. WPA offers the highest level of security available. WEP 128 will offer
increased security over WEP 64.
You can disable or enable with WPA or WEP for protecting wireless network. The
default type of wireless is disabled and to allow all wireless computers to
communicate with the access points without any data encryption
Advanced Setting
Beacon interval: The Beacon Interval value indicates the frequency interval of
the beacon. Enter a value between 20 and 1000. A beacon is a packet broadcast
by the Router to synchronize the wireless network.
RTS/CTS Threshold: The RTS (Request To Send) threshold (number of bytes)
for enabling RTS/CTS handshake. Data with its frame size larger than this value
will perform the RTS/CTS handshake. Setting this attribute to be larger than the
maximum MSDU (MAC service data unit) size turns off the RTS/CTS handshake.
Setting this attribute to zero turns on the RTS/CTS handshake Enter a value
between 1500 and 2347..
Fragmentation Threshold: The threshold (number of bytes) for the
fragmentation boundary for directed messages. It is the maximum data fragment
size that can be sent. Enter a value between 256 and 2346.
DMIT: This value, between 1 and 255, indicates the interval of the Delivery
Traffic Indication Message (DTIM).
802.11b/g: The default setting is 802.11b+g (Mixed mode). If you do not know
or have both 11g and 11b devices in your network, then keep the default in
mixed mode. From the drop-down manual, you can select 802.11g if you have
only 11g card. If you have only 11b card, then select 802.11b.
Wireless MAC Address Filter
The MAC filter screen allows you to configure the router to give exclusive access to up to
32 devices (Allow Association) or exclude up to 32 devices from accessing the router
(Deny Association). Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:AA:BB:11:22:34. You need to know the MAC
address of the devices to configure this screen.
To change your router’s MAC filter settings, click Wireless LAN, MAC Filter to open the
MAC Filter screen. The screen appears as shown.
.
Active: Select Actived to enable MAC address filtering.
21

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Sitecom-WL-118-Quick-Start

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sitecom WL-118 Quick Start bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sitecom WL-118 Quick Start in de taal/talen: Engels als bijlage per email.

De handleiding is 4,07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Sitecom WL-118 Quick Start

Sitecom WL-118 Quick Start Gebruiksaanwijzing - Nederlands - 5 pagina's

Sitecom WL-118 Quick Start Gebruiksaanwijzing - Italiano - 40 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info