777999
12
Verklein
Vergroot
Pagina terug
1/67
Pagina verder
12 GB/IE/NI
or twice, until the ON/OFF indicator light 3 a
goes off).
Connect the cable plug of the plug-in mains
adapter 7 with the charging base 6.
Place the product into the recess of the char-
ging base 6 with the cutting unit 1 pointing
upwards.
Insert the plug-in mains adapter 7 into a
socket which meets the product requirements.
Note: During the charging process, the red
charging display 9 b will light up and the battery
status display 10 will show the battery level.
Note: As soon as the battery is charged, the
battery status display 10 will switch off, while the
charging display 9 b will continue to be red.
Note: You can use the product for up to approx.
60 minutes with a full battery without it being
connected to the power supply.
Note: When the battery is almost empty, the char-
ging display 9 b on the display will flash. Then, the
product may only be used for a short period of time
without being connected to the power supply.
Operating using the plug-in mains
adapter 7:
If the product stops working during use due to an
empty or insufficient battery, you can continue if
the plug-in mains adapter 7 is connected.
Insert the cable plug of the plug-in mains ad-
apter 7 into the socket on the underside of
the product.
To avoid injuries and damage to the product,
always switch the product off before connecting
to the plug-in mains adapter 7.
Insert the plug-in mains adapter 7 into a
socket which meets the product requirements.
After a few seconds you can switch on the pro-
duct by pressing the ON/OFF buton 3 b once
or twice for the desired speed. If the product
does not start working immediately, switch it
off by pressing the ON/OFF button 3 b once
or twice until the indicator light 3 a goes off.
Wait approx. 1 minute before you try to switch
it on again.
Oiling the blades
It is recommended that you oil the blades before
first use and after cleaning to guarantee complete
functionality (see Fig. E).
Apply one or two drops of blade oil 14 bet-
ween the blades and distribute them evenly.
Wipe away any excess oil using a cloth.
You can also use any acid-free oil such as
sewing machine oil.
Note: The blades can be oiled with or without
comb attachment
11
and thinning attachment
12
.
Operation
Changing the attachments
Carefully place the desired comb attachment 11
onto the product as depicted in Fig. F. Ensure
that both recesses of the comb attachment 11
properly engage into the lateral detents at both
sides above the cutting unit 1.
To remove the comb attachment 11 , press and
s
lide it forward and upwards using both t
humbs,
as depicted in Fig. G.
Setting the trim length
To set different trim lengths, hold the upper
part of the product 2 and twist the lower
part of the product 5 into the desired position
(
0.8–2.0 mm). The set trim length will be disp
layed
on the length position indicator 4 which aligns
with the dot-marking on the upper part of the
product 2.
Trimming hair
Note: The hair being trimmed should be clean,
dry and untangled.
Carefully comb the hair using the supplied
comb 17 to disentangle any potential knots.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest SHBS 700 A1 - IAN 354063 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest SHBS 700 A1 - IAN 354063 in de taal/talen: Nederlands, Duits, Engels, Frans, Deens als bijlage per email.

De handleiding is 1.53 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info