766896
14
Verklein
Vergroot
Pagina terug
1/109
Pagina verder
12 GB
Overheating protection
The device has an overheating protection
system. If the motor becomes too hot, the de-
vice automatically switches itself off:
1. Switch off the device.
2. Pull out the mains plug3.
3. Allow the device to cool down to room
temperature.
When the device has cooled down suffi-
ciently, it can be switched on again.
8.3 Switching the device on/
off and selecting speed
WARNING! Risk of material damage!
~The mixing mechanism must not be op-
erated continuously for longer than
10 minutes at a time. You must then al-
low the device to cool down to room
temperature.
NOTE:
the device may move slightly while
you are processing large quantities of dough.
1. Switch the device on by turning the
speed control2 clockwise.
2. Start at a slightly lower speed, and slowly
increase to the desired speed (see “Over-
view of functions” on page 9).
3. Reduce the speed to speed 1 - 2 when
you are adding ingredients during oper-
ation through the filling opening10.
4. Set the speed control2 to 0 to switch
the device off.
NOTE: above all, the ideal speed depends
on the consistency of the material being
blended. The more liquid the contents, the
faster you can blend them.
8.4 Pulse function
By turning the speed control2 to the po-
sition Turbo, you can briefly increase
the speed to the highest setting (8).
9. Dismantling the
device
DANGER from rotating parts!
~Turn off the device and unplug the
mains plug3 from the wall socket be-
fore disassembling the device.
Lifting up the drive arm
1. Press the unlock button1 and fold up
the drive arm12 until it engages and
the unlock button1 pops out again.
Removing the mixing tool
2. Push the mixing tool4/6/7 slightly up-
wards and turn it anticlockwise until it
can be pulled off the axle13.
Removing the splash guard
3. Turn the splash guard11 towards the
open lock symbol until it can be re-
moved.
Removing the mixing bowl
4. Turn the mixing bowl5 towards the
open lock symbol until it can be re-
moved.
Lowering the drive arm
5. Press the unlock button1 and move the
drive arm12 all the way down. The un-
lock button1 pops out again.
__360499_2010_B6.book Seite 12 Freitag, 5. Februar 2021 11:57 11
14

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Silvercrest-IAN-360499-SKM-600-B2

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silvercrest IAN 360499 SKM 600 B2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silvercrest IAN 360499 SKM 600 B2 in de taal/talen: Nederlands, Engels, Frans, Deens als bijlage per email.

De handleiding is 3,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info