685067
3
Verklein
Vergroot
Pagina terug
1/29
Pagina verder
54
English
English
A unique Skin Color Sensor is embedded in Flash&Go™ to measure the treated skin complexion at the
beginning of each session and occasionally during the session. This Skin Color Sensor ensures that a pulse
will be emitted only on suitable skin tones.
Flash&Go™ removes unwanted hair by selectively addressing hair pigment. Varied quantities of pigment
also exist in the surrounding tissue of skin. The quantity of pigment in a particular person’s skin, which is
manifested by their skin complexion, determines the degree of risk they are exposed to using Flash&Go™.
Treating dark skin with Flash&Go™ can result in adverse eects such as burns, blisters, and skin color
changes (hyper- or hypo-pigmentation)
Tanned skin, particularly following sun exposure, contains large quantities of the pigment Melanin. This
applies to all skin types and complexions, including those which don’t seem to tan quickly. The presence of
large quantities of Melanin exposes the skin to higher risk when using Flash&Go™.
Using Flash&Go™ on skin that has been recently exposed to sunlight can result in adverse eects such as
burns, blisters, and skin color changes (hyper- or hypo-pigmentation).
DO NOT USE Flash&Go™ on naturally dark skin!
DO NOT USE Flash&Go™ on tanned skin or after recent sun exposure! Such
use can cause burns or skin injury.
Avoid exposure to the sun for 4 weeks before your Flash&Go™ treatment!
DO NOT USE Flash&Go™ on tanned skin or after recent sun exposure!
Never use Silk’n Flash&Go™ around or near the eyes – Flash&Go™ can be used
only from the cheekbones down.
Do not use the Flash&Go™ Device anywhere on the ears, nipples, or genitals, or
around the anus. These areas may have more sensitive skin, a darker skin
tone, and/or a greater hair density, and using the Flash&Go™ device there may
cause serious skin injury.
It is not recommended to use the Flash&Go™ device on man’s face, jaw, or neck.
The hair in a man’s beard area is too dense for this purpose.
Skin
Hair
The Flash&Go™ device may not be as eective on naturally white, grey, blond and red body hair.
Hair removal by lasers or intense pulse light sources can cause increased hair growth in some individuals.
Based upon currently available data, the highest risk groups for this response are females of Mediterranean,
Middle Eastern and South Asian heritage treated on the face and neck.
Although, Silk’n Flash&Go™ can be used for the treatment of facial hair, extra caution should
be used on the face to avoid the eyes.
76
English
English
5. When to avoid using Flash&Go™?
Certain conditions may prevent the use of Flash&Go™ temporarily. DO NOT USE Flash&Go™ if any of
the following currently apply to you:
If you are pregnant or nursing (lactating).
If you were exposed to strong sunlight or an artificial tanning machine during the past 4 weeks.
If you have a tattoo or permanent makeup on the area to be treated.
Avoid treating areas with dark brown or black spots, such as birth marks, moles or warts.
If you have eczema, psoriasis, lesions, open wounds or active infections, such as cold sores in the area to
be treated. Wait for the aected area to heal before using Flash&Go™.
If you have a history of kelodial scar formation, a known sensitivity to light (photosensitivity) or are taking
medication that makes the skin more sensitive to light, including non-steroidal anti-inflammatory agents,
(e.g., aspirins, ibuprofens, acetaminophen), tetracyclines, phenothiazines, thiazide, diuretics, sulfonyluraes,
sulfonamides, DTIC, fluorouracil, vinblastine, griseofulvin, Alpha-Hydroxi Acids (AHAs), Beta-Hydroxi
Acids (BHAs), Retin-A
®
, Accutane
®
and/or topical retinoids.
If you have abnormal skin conditions caused by diabetes, for example, or other systemic or metabolic diseases.
If you are currently or have recently been treated with Alpha-Hydroxi Acids (AHAs), Beta-Hydroxi Acids
(BHAs), Retin-A
®
, topical retinoids or azelaic acid.
If you have been treated with Accutane® (isotretinoin) within the past 6 months.
If you have been on a steroid regimen within the past 3 months.
If you have a history of herpes outbreaks in the area of treatment, unless you have consulted your
physician and received preventative treatment before using Flash&Go™.
If you suer from epilepsy.
If you have an active implant, such as a pacemaker, incontinence device, insulin pump, etc.
If you have a disease related to photosensitivity, such as porphyria, polymorphic light eruption,
solar urticaria, lupus, etc.
If you have a history of skin cancer or areas of potential skin malignancies.
If you have received radiation therapy or chemotherapy treatments within the past 3 months.
If you have any other condition which in your physicians opinion would make it unsafe for you to be treated.
If you are unsure if Flash&Go™ is safe for you to use, please consult with your doctor or
dermatologist.
6. Precautions – How to use Flash&Go™ Safely
Choose your energy levels CAREFULLY!
Energy level refers to the intensity of the light pulse that is projected on your skin during use, from the
lowest level to the highest level. Indicator lights on the control pad illustrate the energy level at which the
machine is set. As the energy level increases, so do the results of Flash&Go™ as well as the risk of side
eects (see section 8 -“Risks of Using Flash&Go™”).
Always begin your first use of Flash&Go™ at the lowest energy setting!
Only if you experience little or no discomfort during and after use of Flash&Go™ at the lowest energy
setting, raise the energy level by one indicator light the next time you use Flash&Go™, and so on for each
subsequent hair removal session.
For detailed instructions on energy level setting, see “Energy Level” box in section 10.2 - “Treating with
Flash&Go™ for the first time”.
Avoid adverse eects!
Do not treat the same area of skin more than once per hair removal session!
Try to avoid overlapping pulses!
If your skin blisters or burns, STOP USE IMMEDIATELY!
Avoid complications after use of Flash&Go™!
Do not expose treated areas of skin to the sun!
Sun exposure includes constant unprotected exposure to direct sunlight for over 15 minutes, or constant
unprotected exposure to diuse sunlight for over 1 hour.
To protect recently treated skin when exposed to sunlight, be sure to thoroughly apply sunscreen SPF 30
or higher, for 2 weeks after each hair removal session.
Always shave the area to be treated and make sure that the skin is clean and dry before using
Flash&Go™.
Cover birthmarks and tattoos before Flash&Go™ application.
Never look directly at the light coming from the Flash&Go™ treatment surface.
Do not use Flash&Go™ on nipples and genitals (male or female).
Do not use Flash&Go™ on any body site where you might later want hair.
Do not use Flash&Go™ for any purpose other than hair removal.
Never point the Flash&Go™ treatment surface in an attempt to emit a light pulse into open space. Always
make sure that the surface is pointed at, and in full contact with the skin during application.
Remove the Flash&Go™ treatment surface from the skin if either the skin or the surface is too hot.
98
English
English
Never use flammable liquids such as alcohol (including perfumes, sanitizers, or other applications containing
alcohol) or acetone to clean the skin before using Flash&Go™.
Use of Flash&Go™ may cause temporary pigmentation changes (See section 8 -“Risks of Using Flash&Go™”).
Keep this device out of the reach of children. Do not use Flash&Go™ on children or allow children to use it.
7. Reducing the risk of injury
As with any electrical device, certain precautions must be taken in order to ensure your safety when
using Flash&Go™.
Flash&Go™ is an electrical device. As such it should always be kept away from water.
Do not place or store Flash&Go™ where it can fall or be pushed into a tub, sink or any other vessel contain-
ing water. Do not place in, or drop into water or any other liquid.
This may cause severe electrocution.
Do not use Flash&Go™ while bathing.
Do not use Flash&Go™ if it becomes damp or wet.
Do not reach for Flash&Go™ if it has fallen into water.
Unplug Flash&Go™ immediately if it has fallen into water.
Keep Flash&Go™ away from water! Unplug Flash&Go™ immediately if it has fallen into water.
Keep Flash&Go™ away from water!
No modification of this equipment is allowed!
Never open Flash&Go™!
Do not attempt to open or repair your Flash&Go™ device. Opening Flash&Go™ may expose you to
dangerous electrical components and to pulsed light energy, either of which may cause bodily damage and/
or eye injury.
8. Risks of using Flash&Go™
Side eects and complications associated with the use of Flash&Go™ according to its instructions are
uncommon. However every cosmetic procedure, including those designed for home use, involves some degree
of risk. Therefore it is important that you understand and accept the risks and complications that can occur with
pulsed light hair removal systems designed for home use.
Do not attempt to open or repair your Flash&Go™ device. Only authorized
Flash&Go™ repair centers are permitted to perform repairs.
Trying to open Flash&Go™ may also damage the device and will void your warranty.
Please contact Flash&Go™ Customer Service if you have a broken or damaged device in need of repair.
Use Flash&Go™ only for its intended use and as described in its manual.
Flash&Go™ should never be left unattended when plugged into an outlet.
Do not operate Flash&Go™ if it has a damaged cord or plug and keep the power cord away from heated
surfaces.
Do not use Flash&Go™ if you see or smell smoke when it is in use.
Do not use Flash&Go™ if it is not working properly or if it appears damaged.
Do not use Flash&Go™ if the fan vent in its treatment surface is cracked, coming o or missing.
Do not use Flash&Go™ if the Skin Color Sensor is cracked, or broken.
Do not use Flash&Go™ if the outer shell is cracked or coming apart.
Always unplug Flash&Go™ from the electrical outlet immediately after use.
Unplug Flash&Go™ before cleaning.
Do not use Flash&Go™ with any attachments or accessories not recommended by Home Skinovations Ltd.
Flash&Go™ must be operated only with its designated adaptor (for details on the right adaptor to use
please see chapter 14 – “Specifications”)
1716
English
English
12. Troubleshooting
12.1. “My Flash&Go™ does not start.
Make sure the power cord is properly connected to the Flash&Go™ device.
Make sure the power cord is plugged into an electrical outlet on the wall.
12.2. A light pulse is not emitted when I press the PULSE TRIGGER”
Make sure the Ready Indicator is blinking.
Make sure you have good contact with the skin and that the treatment surface is evenly and firmly pressed to
the skin. For your safety, the Pulse trigger will activate a pulse only if the treatment surface is firmly pressed
against the skin.
Check the Indicator Light. If it blinks slowly, the Skin Color sensor has stopped the light pulse; the skin color
window was not properly covered by the skin or your skin may be too dark for you to use Flash&Go™. Try
to apply Flash&Go™ again on a dierent part of your body.
If the Ready light is o, together with any number of blinking Energy Level light indicators, you have a system
error. If this problem persists, contact your local Flash&Go™ Customer Service Center.
If these problems persist, contact your local Flash&Go™ Customer Service Center.
Check if the System Warning Indicator Light is on, and all other lights are blinking. If so, unplug the
device from its power source. The device has reached its End of Life stage. Please refer to section 11 –
“Flash&Go™ Maintenance” for further instructions on how to safely dispose of the device.
Do not attempt to open or repair your Flash&Go™ device. Only authorized
Flash&Go™ repair centers are permitted to perform repairs.
Opening Flash&Go™ may expose you to dangerous electrical components and to pulsed light energy, either of
which may cause bodily damage and/or eye injury.
Trying to open Flash&Go™ may also damage the device and will void your warranty.
Please contact Flash&Go™ Customer Service if you have a broken or damaged device in need of repair.
13. Customer Service
For more information about Silk’n™ products please enter your local Silk’n™ website, www.silkn.com.
If your device is broken, damaged, in need of repair, or for any other user assistance, please contact your
local Silk’n™ Customer Service:
For USA and Canada customers: 1-877-DO-SILKN / 1-877-367-4556, contact@silkn.com
14. Specifications
Spot size 0.9cm x 3cm [2.7cm²]
Technology New Home Pulsed Light™
Pulse Duration 500 – 800 μsec
Wavelength
475-1200nm
Power Output 3-5 J/cm
2
Charging time / Power source Continuous operation
Time needed to treat lower legs 30 minutes
Operation and Safety Skin Color Sensor seamlessly ensures use only on appropriate skin types.
Classified standard
IEC 60601-2-57:2011
Risk Group Exempt
Package size Height 9 inch, Width 9 inch, Depth 5.2 inch180x180x100mm
System weight 200 gr.
Temperature
Operating 10°C to 35°C
Storage -40 to +70°C
Humidity
Operating 30 to 75% RH
Storage 10 to 90% RH
Atmospheric pressure
Operating 700 to 1060hPa
Storage 500 to 1060hPa
Adaptor
Rated
Model: KSA24A1200150HU KSAPV0361200300DS
100-240V ; 50-60Hz 0.5A 100-240V ; 50-60Hz 0.9A
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Silkn Flash and Go Compact bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Silkn Flash and Go Compact in de taal/talen: Engels als bijlage per email.

De handleiding is 0,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info