141769
10
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
Quick guide
Turning on the power
Press a on the TV or B on the remote control unit.
Standby mode
Press B on the remote control unit when the TV is
on.
The TV enters standby mode and the image on the screen
disappears.
• The B indicator on the TV changes from green to red.
To completely turn off the power to the TV, unplug the AC
cord from the AC outlet. However, do not unplug the AC
cord unless otherwise instructed.
Display status indicator
Off Power off.
Red The TV is in standby mode.
Green The TV is on.
NOTE
If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the power outlet.
Weak electric power is still consumed even when a is
turned off.
In DTV input mode, if the power is turned off immediately
after a setting change from the menu screen, the new
setting or channel information may not be memorised.
Initial auto installation (Analogue)
When the TV powers on for the first time after
purchase, the initial auto installation (Analogue) is
invoked. You can automatically set language, country
and channels in successive operations.
NOTE
The initial auto installation functions only once. If the initial
auto installation is not completed (ex: When menu screen
disappeared by not operating for a few minutes, when the
power shut down, etc.), try Auto Installation from the Setup
menu. (See page 15.)
The initial auto installation stops by pressing RETURN.
Setting the on-screen display language
1 Press a/b/c/d to select the desired language
listed on the screen.
2 Press OK to enter the setting.
Setting the country or area
1 Press a/b/c/d to select your country or area
listed on the screen.
2 Press OK to enter the setting.
The programme auto search starts at the same time.
After this setting, auto search starts with the following
order:
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the auto search.
The setup menu disappears and you can watch the
programme on channel 1.
1
2
Using the analogue programme list
You can also select the desired channel from
programme list instead of using 0-9 numeric buttons or
P (r/s).
Press OK when no other menu screen is
displayed. (Except external input.)
Press a/b to select the desired channel to
tune in, and then press OK.
Press END to exit the Programme List.
Initial auto installation (DTV)
Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.
To watch DTV broadcasts, follow the procedures below
to scan all available services in your area.
Press DTV or b to access the DTV mode.
Press DTV MENU and the DTV Menu screen
displays.
Press c/d to select “Installation”.
Press a/b to select “Auto Installation”, and
then press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
See page 17 for setting PIN.
A confirmation message displays. Press c/d to
select “Yes”, and then press OK to start the search.
The TV starts scanning all available DTV and
radio services in your area.
NOTE
The language and country settings used in this operation
are the settings you have already set while executing
the Initial auto installation (Analogue). If you want to
reconfigure the country setting, for instance after moving
to another country, conduct “Auto Installation” from the
Analogue Menu again.
The services are stored according to the channel number
information embedded in the stream (if available). If
the information is not available, the services are stored
according to the order in which they were received.
If you would like to sort the order, it is possible to arrange it
as explained in page 24.
To cancel the scan in progress, press END.
You cannot select any DTV-related menu items unless
“Auto Installation” has been completed.
1
2
3
1
2
3
4
5
8
LC-26D44E-gb.indd 8LC-26D44E-gb.indd 8 2008/02/19 10:21:222008/02/19 10:21:22
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp lc 26d44e bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp lc 26d44e in de taal/talen: Engels als bijlage per email.

De handleiding is 8,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info