46289
2
Verklein
Vergroot
Pagina terug
1/43
Pagina verder
NICAN HiFi STEREO
6 HEAD LONG PLAY
VPS/PDC
AUTO SORTING & CLOCK SET
LOW POWER FEATURE
CHILD LOCK
SHARP SUPER PICTURE
POST CODE SECURITY
NTSC SIMPLE PLAYBACK
VC-MH722LM
VIDEO CASSETTE RECORDER
OPERATION MANUAL
VC-MH722LM Cover 29/6/00 12:26 pm Page 1
SAFETY WARNINGS
Observe all warnings for your safety and to ensure trouble free use
of your VCR.
INFORMATION
Additional information complements instructions.
Dear SHARP Customer
Thank you for buying this SHARP VCR. Given proper care it will provide years of
entertainment for the whole family. Please read this operation manual carefully before
attempting to operate the VCR.
Copyright
Audio-visual material may consist of copyrighted works which must not be recorded
without the authority of the owner of the copyright. Please refer to the relevant laws in
your country.
No part of this publication may be reproduced, stored or transmitted in any form without
prior permission from SHARP Electronics (Europe) GmbH.
®
and PlusCode
®
are registered trademarks of Gemstar Development
Corporation.
system is manufactured under license from Gemstar Development Corporation.
(i)
THIS MANUAL COVERS A RANGE OF MODELS. ALL OF THE
FEATURES MENTIONED MAY NOT NECESSARILY APPLY TO YOUR
VCR.
VC-MH722LM Cover 28/6/00 2:08 pm Page 2
3. CHILD LOCK
16. TV VOLUME
MENU SET
CLEAR
DISPLAY
STANDBY
DPSS
INPUT SELECT
CHANNEL
AM/PM
VIDEO CASSETTE RECORDER
SLOW
PLUSCODE
MODE OSD
INPUT
SELECT
CH
CH
OPERATE VOL
VOL
TV
TIMER
ON/OFF
AUDIO
OUT
SKIP
SEARCH
ZERO
BACK
TAPE
SPEED
TV/VCR
+
REC
PAUSE/STILL
REW FF
PLAY / X2
STOP
231
4
7
5
8
0
6
9
22. MODE ON SCREEN
DISPLAY
24. CHANNEL
/
20. MENU SELECT
28. PAUSE/STILL
8. AM/PM or
27. PLAY/X2
23. DISPLAY
17. ZERO BACK
5.AUDIO OUT
9. REWIND 26. FAST FORWARD
11.STOP
(The STOP button is
also used to switch on the VCR.)
12. TAPE SPEED (SP/LP)
13. SLOW
29. DPSS
SLOW SPEED
/
+
2. INPUT SELECT
6. MENU
19. SET
21. CLEAR
10. RECORD
18. SKIP SEARCH
15. BASIC SHARP TV
CONTROLS
1. STANDBY
4. TIMER ON/OFF
7. PLUSCODE
25. INPUT SELECT
30. TV/VCR
/
+
VCR REMOTE CONTROL
VCR FRONT PANEL/REMOTE CONTROL EQUIVALENT FUNCTIONS.
If you prefer, or if remote control batteries fail, you will need to use the VCR front panel controls. The only
differences in function are shown below:
FUNCTION
OSD
(On-Screen Display)
Moving UP/DOWN menu
Moving LEFT/RIGHT menu
OPERATION WITH REMOTE
CONTROL
[]buttons
[ ] buttons
OPERATION WITH VCR
FRONT PANEL
CHANNEL buttons.
Rotate the shuttle dial COUNTER
CLOCKWISE/CLOCKWISE
/
/
/
/
(ii)
14. TV CHANNEL
/
VC-MH722LM Cover 28/6/00 2:08 pm Page 3
GB-1
CONTENTS
BEFORE USING YOUR VCR
Important notes on your VCR ....................................................................................................... 2
Unpacking the accessories ........................................................................................................... 3
INSTALLING YOUR VCR
Connecting the cables ................................................................................................................. 4
Tuning the TV into the VCR............................................................................................................5
Auto installation .............................................................................................................................. 6
BASIC OPERATION
Important notes on your VCR and video tapes ......................................................................... 8
How to playback a video tape ....................................................................................................8
Pausing and slow motion........................................................................................ 9
Fast forwarding/rewinding a video tape............................................................ 10
Immediate recording................................................................................................................... 11
How to use to make a recording ........................................................................... 12
How to set a delayed recording ................................................................................................ 14
ADVANCED OPERATION
Audio and your VCR (Hi-Fi VCR’S ONLY) ................................................................................... 17
Playback of a video tape ........................................................................................................... 19
Checking the amount of tape remaining .......................................................... 19
Playing back a video tape repeatedly .............................................................. 19
Playing back an NTSC tape .................................................................................20
Digital Display................................................................................................................................ 21
Blue mute ...................................................................................................................................... 22
Colour ............................................................................................................................................ 22
Searching the video tape ........................................................................................................... 23
Skip searching the video tape ............................................................................. 23
Digital programme search system (DPSS)........................................................... 23
Recording from other equipment .............................................................................................. 24
Decoder switching operation.....................................................................................................25
SPECIAL FEATURES ON YOUR VCR
Post code security ........................................................................................................................ 26
Low Power feature ....................................................................................................................... 27
Child lock....................................................................................................................................... 27
CUSTOMISED INSTALLATION
Manually tuning a channel ......................................................................................................... 28
Manually sorting channels........................................................................................................... 29
Sorting the channels into your preferred order.................................................. 29
Deleting channels.................................................................................................. 30
Re-naming channels ............................................................................................. 31
Manually setting the clock .......................................................................................................... 32
MORE INFORMATION ABOUT YOUR VCR
VCR digital display ....................................................................................................................... 33
Selecting the output from the VCR ............................................................................................ 33
On-screen display......................................................................................................................... 34
Specifications................................................................................................................................ 35
Troubleshooting ............................................................................................................................ 36
Guarantee .................................................................................................................................... 38
Connecting to the mains ............................................................................................................ 39
TINS-3881 ENGLISHTOC.fm Page 1 Thursday, June 29, 2000 12:54 PM
2
If problems persist contact the SHARP Helpline on tel: 0990-274277
BEFORE USING YOUR VCR
IMPORTANT NOTES ON YOUR VCR
IDEAL VCR LOCATION
PLACE THE VCR..
... on a flat level surface away from radiators
or other heat sources and out of direct
sunlight.
... and video tapes away from magnetic
sources such as speakers or microwave ovens.
... at least 8” (20cm) away from the TV.
... away from curtains, carpets or other
materials and allow ventilation space around
the VCR.
DO NOT...
... block the air-vent openings.
... expose the VCR to excessive dust,
mechanical vibration or shock.
... place any heavy object or liquid on top of
the VCR. If liquid drops inside the VCR unplug
immediately and contact your SHARP dealer.
Do not use the VCR.
... insert or drop anything into the tape
compartment or through the
air-vents, as this could result in serious
damage, fire or an electric shock.
POWER SOCKETS
To avoid overheating or even fire, insert the
plug correctly into the socket.
DO NOT...
... overload power sockets, this may cause a
fire or electric shock.
... pull the power cord to disconnect the plug
from the mains.
... bind the power cords together.
This VCR is not equipped with a mains power
switch. Accordingly, nominal current to drive
the clock is drawn at all times when the AC
power cord is plugged into a wall socket. If
the VCR is not to be used for an extended
period be sure to unplug the cord.
TINS-3881 ENGLISH.BOOK Page 2 Wednesday, June 28, 2000 2:37 PM
3
If problems persist contact the SHARP Helpline on tel: 0990-274277
BEFORE USING YOUR VCR
UNPACKING THE ACCESSORIES
To fit the batteries into the remote control
Remove the battery cover on the back of the remote control.
Fit the batteries: to and to . terminals. Place the
battery cover back into position.
CHECK ALL THESE ACCESSORIES ARE SUPPLIED WITH YOUR VCR. CONTACT YOUR DEALER IF
ANY ARE MISSING.
(TYPE AA/R6/UM3)
BATTERIES (X2)
for the remote control unit.
RF CONNECTION CABLE
connects the VCR to the TV.
Remote Control
Remote Control must be pointed towards the VCR to operate.
Do not expose to liquid or shock.
May not function if the VCR is in direct sunlight or any other strong light.
Replace both alkaline batteries (type AA/R6/UM3) if the remote control
fails.
Remove the batteries and keep in a safe place if you do not plan to use
the VCR for several months.
Remove and dispose of flat batteries safely and promptly.
Incorrect use of batteries may cause them to leak or burst.
REMOTE
CONTROL
For a more
detailed
picture of
your remote
control refer
to page (ii).
Battery cover
TINS-3881 ENGLISH.BOOK Page 3 Wednesday, June 28, 2000 2:37 PM
4
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
CONNECTING THE CABLES
The VCR is correctly connected.
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTEN
NE
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LIN
E1(
I)IN
/OUT
SON/VIDEO
(L1/
I)
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE1(
I)IN
/OUT
SON/VIDEO
(L1/I)
RF OUT
SORTIE ANTENNE
A
N
T
EN
N
A
IN
EN
T
R
EE A
N
T
EN
NE
LINE2(II) IN
/DECODER
CANAL PLUS
/L2(II)
LINE1(
I)IN
/OUT
SON/VIDEO
(L1/
I)
AERIAL OR
CATV CABLE
Optional:
Connect your
Satellite receiver or decoder to
the VCR using a scart lead to
LINE 2 IN/DECODER
socket on the VCR.
Connect your existing aerial
cable to the
ANTENNA IN
socket on your VCR.
DECODER UNIT
OR SATELLITE SYSTEM
1
2
3
Connect your TV to the VCR using the
supplied RF connection cable, i.e.
connect the VCR
RF OUT
socket to
the TV
AERIAL IN
socket.
Connect the VCR
to the mains.
BACK OF
TELEVISION
Optional
SCART (not supplied). If you
have a scart lead connect it to your TV and
LINE 1 IN/OUT
socket on the VCR.
- The advantage of a Scart connection is
improved picture and sound quality during
playback.
TINS-3881 ENGLISH.BOOK Page 4 Wednesday, June 28, 2000 2:37 PM
5
If problems persist contact the SHARP Helpline on tel: 0990-274277
Example
(Blue background
with white text)
INSTALLING YOUR VCR
TUNING THE TV INTO THE VCR
IMPORTANT NOTE: By pressing the STANDBY button, the VCR will toggle
between STANDBY and LOW POWER modes. The VCR display will not be
illuminated in LOW POWER mode.
1.
Press the
STANDBY
button to ensure your VCR is in the STANDBY mode (not in LOW
POWER mode).
2.
Press and hold the button located on VCR front panel for 3 seconds.
The VCR will search and display an ideal
channel.
Wait for the flashing channel number to appear
on the VCR display.
CAUTION:
If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF below.
3.
Switch on the TV.
4.
Select the next available or unused channel on your TV, this will become the dedicated
video channel.
Example of
TV channels
5.
Tune the selected channel on your TV until the screen below appears.
Store this as your VCR channel. (Refer to your TV manual for instructions on how to tune in
your TV).
6.
Press the button to place the VCR back into STANDBY. (The MENU screen will not
be displayed when the VCR is in STANDBY mode.)
NOTES:
If you have a preferred channel, the RF channel can be set manually (21-69) after
Step 2 using [ / ] keys.
RF THROUGH ON/OFF:
If you wish to connect your VCR to the TV with only a scart lead, the RF Output on your
VCR can be turned OFF and ON by pressing the
CLEAR
button then
SET
to return to
STANDBY at point 2. This will help minimise interference.
1 = BBC1 4 = Channel 4
2 = BBC2 5 = Channel 5
3 = ITV ? = VCR
MENU SCREEN
ME N U
V I DEOPLUS
TIMER
MOD E
SET UP
įĬ : SELECT
SET :ENTER MENU :EX I T
Module 03G.fm Page 5 Thursday, June 29, 2000 12:29 PM
6
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
AUTO INSTALLATION
These models automatically tune the TV channels for your area, then using Teletext
information sort the TV channels into a standard order and set the clock.
Turn the TV on and select the video channel. (As previously explained).
1.
Press
STOP
to switch on the VCR.
2.
Follow the instructions that appear on the TV screen by pressing the
SET
button. (Auto
tune may take a few minutes)
NOTE:
If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you
wish to reset your VCR and start the installation again, refer to
VCR RESET
at the back
of the book.
PLEASE BE SURE THE
AER I AL / SCART CABLE I S
CONNECTED TO YOUR VCR .
PRESS SET TO CONT I NUE
SET : ENTER MENU : EX I T
AUTO INSTALLAT I ON
PRESS SET KEY TO START
SET : ENTER MENU : EX I T
Press the SET button.
1CH22
AUTOMATIC SORTING.
PLEASE WA I T .
SET : ENTER MENU : EX I T
Press the SET button.
See next page to continue
SET
STOP
REMOTE
CONTROL
Button positions for your reference.
TINS-3881 ENGLISH.BOOK Page 6 Wednesday, June 28, 2000 2:37 PM
7
If problems persist contact the SHARP Helpline on tel: 0990-274277
INSTALLING YOUR VCR
INSTALLATION CONTINUED
On completion, the
MOVE MENU
will appear
showing the standard channel order.
3
MOVE 1/5
1BBC1 7 1 3
2BBC2 8 1 4
3ITV 9 15
4CH4 10 16
5CH5 11 17
61218
įĬ ǡǠ : SELECT
SET : ENTER MENU : EX I T
MENU
DISPLAY
REMOTE
CONTROL
if you wish to change the channel order
refer to
MANUALLY SORTING
CHANNELS - Sorting the channels
into your preferred order
.
To check the clock has been set correctly,
press
DISPLAY
until the time appears on the
VCR display.
If the clock is not automatically set, the clock
screen will appear, refer to
MANUALLY
SETTING THE CLOCK
for help on setting
the time and date.
Press
MENU
to exit.
TINS-3881 ENGLISH.BOOK Page 7 Wednesday, June 28, 2000 2:37 PM
8
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
IMPORTANT NOTES ON YOUR VCR AND VIDEO
TAPES
VIDEO TAPES
If you use only good quality video tapes, generally it will not be necessary to clean the
video heads.
If poor quality tapes are used, or if a tape is loaded after changing VCR location, oxide
from the tape may "clog" the video heads. This will cause the playback picture to be
"snowy", or even disappear.
To remove minor contamination run a video tape in visual search mode. If this fails, you
will need to have the heads cleaned by a SHARP Service Facility. Please note, if cleaning
is necessary it is not covered by the guarantee.
Use video tapes which carry the mark.
HOW TO PLAYBACK A VIDEO TAPE
PLAYBACK
1.
Switch on your TV and select the video channel.
2.
Carefully push a pre-recorded video
tape into the tape compartment.
This will switch the VCR on.
If the record-protection tab has
been removed, the VCR will start
playback as soon as the video tape
has been loaded.
3.
To start playback, press
PLAY/
X2
().
BEFORE YOU PLAYBACK A VIDEO TAPE
Condensation forms in the VCR when it is moved out of or into a warm place.
If you try to playback or record, the video tape and VCR may be damaged.
Turn the VCR on and wait for about two hours until the VCR reaches room
temperature before operating.
SECAMPAL
Record protection tab
TINS-3881 ENGLISH.BOOK Page 8 Wednesday, June 28, 2000 2:37 PM
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp VC-MH722LM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp VC-MH722LM in de taal/talen: Engels als bijlage per email.

De handleiding is 8,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info