787657
7
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
EN
ū Connect the HDMI cable (not included) from unit‘s HDMI (ARC)
socket to the HDMI (ARC) socket on your ARC compliant TV. Then
press the remote control to select HDMI ARC.
TIPS:
Your TV must support the HDMI-CEC and ARC function and this
must be set to “ON“ or ACTIVE“ in the TV settings menu.
The setting method of HDMI-CEC and ARC may dier depending
on the TV. For details about ARC function, please refer to your TV
manual.
Only HDMI cables of version 1.4 or higher can support the ARC
function.
OPTICAL input
(Refer to 8 on page 2).
Remove the protective cap of the OPTICAL socket, then connect an
OPTICAL cable (not included) to the TV’s OPTICAL OUT socket and
the OPTICAL socket on the unit.
TIP:
While in HDMI ARC/OPTICAL mode, if theres no sound output from
the unit and the HDMI ARC/OPTICAL lights ashes quickly, you may
need to activate PCM signal output on your source device (eg. TV, DVD
or Blu-ray player).
AUX
(Refer to 9 on page 2).
A. Use a RCA to 3.5mm audio cable (not included) to connect the TV’s
audio output sockets to the AUX socket on the unit.
B. Use a 3.5mm to 3.5mm audio cable (not included) to connect the
TVs or external audio device headphone socket to the AUX socket
on the unit.
TIP:
When you use the headphone output on the TV set, you will be able to
adjust the volume level directly using the TV remote control.
Connect to power
(Refer to 10 on page 2).
Before connecting the AC power cord, ensure you have completed
all other connections.
Risk of product damage! Ensure that the power supply voltage
corresponds to the voltage printed on the back or the underside
of the unit.
Connect the power cable to the AC~ Socket of the unit and then
into a power socket.
Basic operation
Standby/ON
When you rst connect the unit to the power socket, the unit will be
in STANDBY mode. The indicator will light up red.
Press on the remote control to switch the soundbar ON or OFF.
Disconnect the plug from the power wall socket if you want to
switch the unit o completely.
ūThe soundbar can also be controlled when connected via HDMI CEC.
ūIf a TV or an external device (Only for AUX socket) is connected, the
unit will switch on automatically when the TV or the external device is
switched on.
ū When the unit has no input signal for over 15 minutes, it will
automatically switch to Standby mode.
Select modes
Press on the unit repeatedly or on the remote control to select the
desired mode.
Red: STANDBY
Green: AUX
Blue: Bluetooth
Yellow: OPTICAL
Cyan: HDMI ARC
Purple: USB
Adjust the volume
ū Press the +/– buttons on the unit or on the remote control to adjust
the volume.
ū If you wish to turn the sound o, press on the remote control or
the soundbar. Press again or press the +/– on the unit or on the
remote control to resume normal listening.
ū While adjusting the volume, the status indicator ashes quickly.
When maximum or minimum volume levels are achieved, the
ashing will stop.
Select equaliser (EQ) eect
During playback, press the EQ button on the remote control to select
between preset equalisers. Each time the EQ button is pressed the
soundbar will change between the EQ functions:
Movie (for movies and lms) - yellow light ashes for 2 seconds.
Music (for all types of music) - green light ashes for 2 seconds.
Voice (for listening to dialogue) - red light ashes for 2 seconds.
Custom (for personal bass/treble settings) - white light ashes for
2 seconds.
Custom settings
Press the EQ button to enter Custom settings or press either the
BASS or TRE button +/- buttons once, a white light will ash for 2
seconds.
Use the BASS/TRE buttons on the remote control to increase (+)
or decrease (-) the EQ level. The selected EQ level is indicated by
the speed at which the LED indicator on the Soundbar ashes.
A ashing red LED indicates an increased level, a white LED (not
ashing) indicates the level is at/0, a ashing green LED indicates
a decreased level.
LED colour EQ level Speed LED ashing
RED
+3 Fast
+2 Medium
+1 Slow
White 0 On
Green
-1 Slow
-2 Medium
-3 Fast
NOTE: New EQ changes are saved as default. You have 3 seconds
between each key press to make any changes before the EQ mode exits.
AUX/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to the TV or audio device.
2. While in ON mode, press on the unit repeatedly or on the
remote control to select the desired mode.
3. Operate your audio device directly for playback features.
4. Press +/– button to adjust the volume to your desired level.
TIP:
While in HDMI ARC/OPTICAL mode, if theres no sound output from
the unit and the HDMI ARC/OPTICAL lights ashes quickly, you may
need to activate PCM signal output on your source device (eg. TV, DVD
or Blu-ray player).
Bluetooth operation
Pair Bluetooth-enabled devices
The rst time you connect your Bluetooth device to this player, you
need to pair your device to this player.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp HT-SB100 - Soundbar bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp HT-SB100 - Soundbar in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 1.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info