21208

Sharp DVRW340U Handleiding

93
Verklein
Vergroot
Pagina terug
1/112
Pagina verder
VCR/DVD RECORDER
COMBINATION
OPERATION MANUAL
Please read this Operation Manual carefully before using
your VCR/DVD RECORDER COMBINATION.
1
The region number for
this unit is 1.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
DV-RW340U
DV-RW350U
Before you start
Español
Recording Playing discs EditingConnections Getting started
Changing the SETUP menu
VCR functions Others
Operation Manual
Supplied Accessory
• Remote control
(9HSNB
114UD)
with two “AA” size
batteries
• Round Coaxial cable
(9HSWPZ0901TM003)
• Audio/Video cables
(9HSWX1E56B5-001)
• Operation Manual
(9HS
1VMN20224)
• QUICK USE GUIDE
(9HS1VMN20237)
Precautions
Before you start
2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITAR LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.
CAUTION:
THIS UNIT IS A CLASS 1 LASER PRODUCT.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECI-
FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
AS THE LASER BEAM USED IN THIS UNIT IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE
CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
This symbol warns the user of uninsulated
voltage within the unit that can cause dan-
gerous electric shocks.
This symbol alerts the user that there are
important operating and maintenance instruc-
tions in the literature accompanying this unit.
CAUTION
:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SER-
VICEABLE PARTS INSIDE. REFER SERVICING TO QUAL-
IFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
For future reference, record the model and serial numbers (located on
the rear of the Unit) in the space provided.
Model No.:
Serial No.:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(
1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
“WARNING—FCC Regulations state that any unauthorized changes or modi-
fications to this equipment not expressly approved by the manufacturer could
void the user’s authority to operate this equipment.”
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.
Before you start EspañolRecording Playing discs EditingConnections Getting started
Changing the SETUP menu
VCR functions Others
Before you start
3
Precautions (cont’d)
1. Read Instructions - All the safety and operating instructions
should be read before the appliance is operated.
2. Retain Instructions- The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Cleaning - Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol clean-
ers. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specific reason, such as the pos-
sibility of the loss of an authorization code for a CATV con-
verter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference
to unplugging the appliance in the cleaning description oth-
erwise required in item 5.
6.Attachments - Do not use attachments not recommended by
the video product manufacturer as they may cause hazards.
7.
Water and Moisture- Do not use this video product near water,
for example, near a bath tub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, or near a swimming pool, and the like.
8.Accessories - Do not place this video product on an unsta-
ble cart, stand, tripod, bracket, or table. The video product
may fall, causing serious injury to a child or adult, and seri-
ous damage to the appliance. Use only
with a cart, stand, tripod,bracket, or table
recommended by the manufacturer, or
sold with the video product.Any mount-
ing of the appliance should follow the
manufacturer's instructions and should
use a mounting accessory recommended
by the manufacturer.
9.
Transportation - A product and cart combination should be
moved with care. Quick stops, excessive force, and uneven sur-
faces may cause the appliance and cart combination to overturn.
10.Ventilation - Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the video
product and to protect it from overheating, and these open-
ings must not be blocked or covered. The openings should
never be blocked by placing the video product on a bed,
sofa, rug, or other similar surface.This video product should
not be placed in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the manufac-
turer's instructions have been adhered to.
11. Power Sources - This video product should be operated
only from the type of power source indicated on the mark-
ing label. If you are not sure of the type of power supply to
your home, consult your appliance dealer or local power
company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
12. Grounding or Polarization - This video product is equipped
with a polarized alternating-current line plug (a plug having
one blade wider than the other). This plug will fit into the
power outlet only one way.This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your elec-
trician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13. Power Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par-
ticular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
14. Outdoor Antenna Grounding - If an outside antenna or cable
system is connected to the video product, be sure the antenna
or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges.Article 810 of
the National Electrical Code, ANSI/NFPA No. 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an anten-
na discharge unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. (Fig.A)
15. Lightning - For added protection for this video product dur-
ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall out-
let and disconnect the antenna or cable system. This will
prevent damage to the video product due to lightning and
power-line surges.
16. Power Lines - An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
17. Overloading - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
18. Object and Liquid Entry - Never push objects of any kind
into this video product through any openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of
any kind on the video product.
19. Servicing - Do not attempt to service this video product
yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to
qualified service personnel.
20. Damage Requiring Service - Unplug this video product from
the wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
a.When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video
product.
c. If the video product has been exposed to rain or water.
d. If the video product does not operate normally by follow-
ing the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improp-
er adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the video product to its normal operation.
e. If the video product has been dropped or damaged in any way.
f.When the video product exhibits a distinct change in per-
formance this indicates a need for service.
2
1. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteris-
tics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22. Safety Check - Upon completion of any service or repairs to
this video product, ask the service technician to perform
safety checks to determine that the video product is in
proper operating condition.
23. Heat - This video product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
ANTENNA
LEAD
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND
CLAMP
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
S2898A
Important Safeguards
4
Precautions (cont’d)
Before you start
Copy Protection
Warning of Dew Formation
This Unit supports Macrovision copy protection.
On DVD discs that include a copy protection code, if the contents of the DVD disc are copied using this unit, the copy protec-
tion code prevents the DVD or videotape copy from playing normally.
Moisture may form inside the unit under the following conditions:
• Immediately after a heater is turned on.
• In a steamy or humid room.
• When the unit is suddenly moved from a cold to warm environment.
If moisture forms inside this unit, it may not operate properly or damage the videotape. In such case, turn on the power and
wait for more than two hours for the moisture to evaporate.
Notice for progressive scan outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts
to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output. If there are questions regarding our TV set compatibility with this model 525p
DVD player, please contact our customer service center.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093 licensed for limited viewing uses only.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protec-
tion technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
No Fingers or Other Objects Inside
Do not put your fingers or objects on the disc tray or in the cassette compartment.
Location and Handling
Location and Handling
• Do not cover or place the unit in enclosed spaces to prevent excessive temperature build up.
• Do not place the unit in direct sunlight, or near heat sources.
• Depending on the use environment, the temperature of the unit may increase slightly.This is not a malfunction.
• Keep the unit away from strong magnetic objects.
• Do not stand the unit vertically. Install the unit in a horizontal and stable position.
• Do not place any object containing water or other liquids on the unit. In the event that liquid should enter the cabinet, unplug the
unit immediately and contact the retailer or service centre approved by SHARP immediately.
•
Do not remove the unit cabinet.Touching parts inside the cabinet could result in electric shock and/ or damage to the unit. For ser-
vice and adjustment inside the cabinet, call a qualified dealer or service centre approved by SHARP.
Nonuse Periods
Location and Handling
• When the unit is not being used, switch the unit to the Standby mode.
• When left unused for a long period of time, the unit should be unplugged from the household AC outlet.
• Do not place the unit in direct sunlight, or near heat sources.
Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
5
Precautions (cont’d)
Before you start
SERVICING
1. Please refer to relevant topics in the Troubleshooting on pages 97-100 before returning the product.
2. Do not attempt to service this Unit yourself. Instead, unplug it and contact a Sharp Authorized Service Center for inspection.
(See
CONSUMER LIMITED WARRANTY at the end of this manual.)
3. Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire, elec-
trical shock, or other hazards.
4. Following any service or repair, be sure the service technician performs safety checks to certify that this Unit is in safe operat-
ing order.
CLEANING THE CABINET
¡Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or
abrasive.
CLEANING DISCS
¡When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the center out. Do not wipe in a circular motion.
¡Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analogue records.
RECOMMENDED MEASURES FOR OPTIMUM PICTURE EXCELLENCE
This Unit is a precision device constructed using extremely accurate technology.
¡The disc cannot be played if the disc drive component is worn out or if the internal pick up lens is dirty.
¡If this unit still does not perform properly although you refer to the relevant sections and to Troubleshooting on pages 97-100,
the laser optical pickup unit may be dirty. Consult a Sharp Authorized Service Center for inspection and cleaning of the laser
optical pickup unit.
DISC HANDLING
¡Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
¡Always store the disc in its protective case when it is not used.
AUTO HEAD CLEANING
¡Automatically cleans video heads as you insert or remove a videotape, so you can see a clear picture.
¡Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video
heads after a long period of use, or the usage of rental or worn videotape can cause this problem. If a streaky or snowy picture
appears during playback, the video heads in your unit may need to be cleaned.
1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,please call our help line mentioned on page 103 to locate a Sharp Authorized
Service Center.
Maintenance
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your
local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning
chemical wastes.
Make your contribution to the environment!!!
• Used up batteries do not belong in the dust bin.
• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.
Others
It is the intent of Sharp that this product be used in full compliance with the copyright laws of the United States and that prior
permission be obtained from copyright owners whenever necessary.
“Licensed under one or more of U.S. Pat. 4,972,484, 5,214,678, 5,323,396, 5,530,655, 5,539,829, 5,544,247, 5,606,618,
5,6
10,985, 5,740,317, 5,777,992, 5,878,080, or 5,960,037.”
6
Table of contents
Before you start
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Title/Chapter search . . . . . . . . . . . . . . . . . . . . . . . .52
Track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Repeat/Random/Program play . . . . . . . . . . . . . .54
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Program play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Selecting the format of audio and video . . . . . .56
Switching audio soundtrack . . . . . . . . . . . . . . . . . . .56
Switching subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .57
Switching camera angles . . . . . . . . . . . . . . . . . . . . . .58
Reducing block noise . . . . . . . . . . . . . . . . . . . . . . . .58
Editing . . . . . . . . . . . . . . . . . . . . . . . . .59
Information on disc editing . . . . . . . . . . . . . . . . .59
Guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . . .59
Editing discs in Video mode . . . . . . . . . . . . . . . . . . .59
Editing discs in VR mode . . . . . . . . . . . . . . . . . . . . .60
Editing DVD-RW discs in Video mode . . . . . . . .61
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .62
Setting or clearing chapter markers . . . . . . . . . . . . .64
Editing DVD-RW discs in VR mode (Original) . .65
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .66
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .67
Setting or clearing chapter markers . . . . . . . . . . . . .69
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .70
Setting titles to protect . . . . . . . . . . . . . . . . . . . . . .72
Releasing titles from protecting . . . . . . . . . . . . . . . .73
Editing DVD-RW discs in VR mode (Playlist) . . .74
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Deleting parts of titles . . . . . . . . . . . . . . . . . . . . . . .75
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .76
Setting or clearing chapter markers . . . . . . . . . . . . .78
Setting pictures for thumbnails . . . . . . . . . . . . . . . . .79
Adding titles to a Playlist . . . . . . . . . . . . . . . . . . . . .8
1
Deleting a Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . .82
Editing DVD-R discs . . . . . . . . . . . . . . . . . . . . . .83
Deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Putting names on titles . . . . . . . . . . . . . . . . . . . . . .84
Changing the SETUP menu . . . . . . . . .85
Tour of the SETUP menu . . . . . . . . . . . . . . . . . .85
Language setting . . . . . . . . . . . . . . . . . . . . . . . . .86
Display setting . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Audio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Settings for Parental lock level . . . . . . . . . . . . . .92
VCR functions . . . . . . . . . . . . . . . . . . .94
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Recording and One-touch timer recording . . . .94
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
One-touch timer recording . . . . . . . . . . . . . . . . . . . .95
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Index search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Other operations . . . . . . . . . . . . . . . . . . . . . . . .96
Others . . . . . . . . . . . . . . . . . . . . . . . . .97
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .97
RF converter output . . . . . . . . . . . . . . . . . . . . .100
Language code . . . . . . . . . . . . . . . . . . . . . . . . .101
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Service Information (For the U.S.) . . . . . . . . . .103
Español . . . . . . . . . . . . . . . . . . . . . . . .104
Before you start . . . . . . . . . . . . . . . . . . .2
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . .6
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Functional overview . . . . . . . . . . . . . . . . . . . . . . .8
Installing batteries in the remote control . . . . . . . . .10
Using a remote control . . . . . . . . . . . . . . . . . . . . . .
10
The VCR/DVD recorder Switching . . . . . . . . . . . . . .
10
SETUP/DISC/CD menu . . . . . . . . . . . . . . . . . . . . . . .
11
DISPLAY menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connections . . . . . . . . . . . . . . . . . . . . .14
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . .14
Connection to a cable box or satellite box . . . .
15
Connection to an Audio System . . . . . . . . . . . . .
16
Getting started . . . . . . . . . . . . . . . . . . .17
Easy DVD recording . . . . . . . . . . . . . . . . . . . . . .17
Channel setting . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Getting channels automatically . . . . . . . . . . . . . . . . .19
Adding/deleting channels . . . . . . . . . . . . . . . . . . . . .20
Selecting the TV stereo or SAP . . . . . . . . . . . . .21
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . .22
Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .22
Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . . .23
Setting the daylight saving time . . . . . . . . . . . . . . . .25
Selecting the TV aspect ratio . . . . . . . . . . . . . . .26
Recording . . . . . . . . . . . . . . . . . . . . . . .27
Information on DVD recording . . . . . . . . . . . . . .27
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Restrictions on recording . . . . . . . . . . . . . . . . . . . .27
Information on copy control . . . . . . . . . . . . . . . . . .28
Making discs playable in other DVD player (Finalize) 28
Formatting a disc . . . . . . . . . . . . . . . . . . . . . . . .29
Choosing the recording format of a blank disc . . . .29
Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . .30
Basic recording . . . . . . . . . . . . . . . . . . . . . . . . . .31
Checking the recording picture quality . . . . . . . . . .32
One-touch timer recording . . . . . . . . . . . . . . . .33
Timer recording . . . . . . . . . . . . . . . . . . . . . . . . .34
Hints for timer recording . . . . . . . . . . . . . . . . . . . . .36
Settings for an external source . . . . . . . . . . . . . .37
Connection to an external source . . . . . . . . . . . . . .37
Recording from an external source . . . . . . . . . . . . .38
Dubbing Mode . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Finalizing the discs . . . . . . . . . . . . . . . . . . . . . . .4
1
Setting a disc to protect . . . . . . . . . . . . . . . . . . .42
Playing discs . . . . . . . . . . . . . . . . . . . . .43
Information on DVD play . . . . . . . . . . . . . . . . . .43
Guide to displays . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Playing discs using the disc menu . . . . . . . . . . . . . . .46
Playing discs using the title menu . . . . . . . . . . . . . . .47
Special playback . . . . . . . . . . . . . . . . . . . . . . . . .48
Resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Fast forward / Fast reverse . . . . . . . . . . . . . . . . . . .48
Skipping TV commercials during play . . . . . . . . . . . . .49
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Step by step playback . . . . . . . . . . . . . . . . . . . . . . . .50
Slow forward / Slow reverse play . . . . . . . . . . . . . . .50
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Marker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
7
Features
Before you start
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
Recording
This unit is compatible with both DVD-RW, which is rewritable
repeatedly, and DVD-R, which is available for recording once.
Also, this unit allows you to record to the videotape. You can
choose either one for your convenience.
Up to 8 programs recording:
You can program the unit to record up to 8 programs, up
to a year in advance. Daily or weekly program recordings
are also available.
One-touch timer recording:
You can easily set a recording time as you prefer. Every
time the REC/OTR button on the remote control or on
the front panel pressed during recording, the recording
time will be increased by 30 minutes up to 8 hours.The
recording automatically stops when the recording time
you set is reached.
Dubbing mode:
You can copy a DVD disc to a videotape or copy a video-
tape to a DVD disc.This function will be possible only if
the DVD disc or a videotape is not copy protected.
You cannot record on a videotape when its record tab is
removed.
REC MONITOR:
You can confirm the picture quality for recording in the current
recording speed which you set.
If you want to change the recording speed, press REC
MODE/REC SPEED button to set the desired recording mode.
Automatic Chapter marker setting:
Chapter markers will be put on recordings as you set in
SETUP menu before attempting to record.
Automatic Title menu making:
The unit makes title menus automatically when finalizing
the disc which are recorded in Video mode.
Automatic PLAYLIST making (VR mode):
A Playlist will be prepared from an Original list, so that
you can edit titles in a Playlist as you prefer.
An Original list is kept as it is.
Play
Theater surround sound in your home:
When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you are allowed to expe-
rience the theater surround sound from discs with surround
sound system.
Quick search for what you want to watch:
You can easily find the part you want to watch using the search
function. Search for a desired point on a disc by title, chapter, or
time.
Start to play from Original and Playlist (VR mode):
Title playing is available from either an Original list or Playlist.
Quick search for what you want to watch:
You can easily find the part you want to watch using the Index
search/Time search functions.An index mark will be assigned at
the beginning of each recordings you make. For Time search func-
tion, you can go to a specific point on a videotape by entering
the exact amount of time you wish to skip.
VCR mode
DVD mode
DVD mode
VCR modeDVD mode
Editing
Setting/Clearing chapter markers:
You can easily add chapter markers anywhere in your
recordings for easy editing. (VR mode)
Making your own Playlist:
With the original remains as it is, you can edit titles on
Various playlist as you prefer.
Putting names on titles.
Setting pictures for thumbnails.
Setting/clearing chapter markers.
Deleting parts of titles, etc.
Protecting titles:
To avoid editing or erasing titles, the protect function is
useful when it is ON in the original list.
Compatibility
Available for playing discs recorded in Video mode
on a regular DVD player (Video mode):
Discs recorded in the Video mode can be played on regular
DVD players, including computer DVD drives compatible with
DVD-Video playback*.You will need to finalize the discs
recorded in Video mode to play in other DVD players.
* DVD-Video Format (Video mode) is a new format for record-
ing on DVD-RW/R discs that was approved by the DVD Forum
in 2000. Adoption of this format is optional for manufactures of
DVD playback devices and there are DVD-Video players, DVD-
ROM drives or other DVD playback devices that do not play
DVD-RW/R discs recorded in the DVD-Video Format.
Others
Progressive Scan system
Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher resolu-
tion than that of traditional television signals.
Symbol in this operation manual
Many functions of this unit are depending on the disc type or the
recording mode.
To specify for what disc type or recording mode each function is, we
put the following symbols at the beginning of each item to operate.
Symbol
Description
Available to DVD Video discs
Available to DVD-RW in Video mode
Available to DVD-RW in VR mode
Available to DVD-R discs
Available to Audio CDs
Available to CD-RW/R discs with
MP3 files
Available to VHS tapes
Use only tapes marked with
this unit.
Indicates that you need to select the DVD
mode by pressing DVD button on the
remote control before proceeding next step.
Indicates that you need to select the VCR
mode by pressing VCR button on the
remote control before proceeding next step.
DVD-RW
DVD-RW
VR
DVD-R
DVD-R
DVD-RW
DVD-RW
Video
DVD-V
DVD-V
VCR
VCR
MP3
MP3
CD
CD
VCR
DVD
First:
(Press:)
First:
(Press:)
DVD+R
DVD+R
DVD+RW
DVD+RW
Video
Available to DVD+RW in Video mode
Available to DVD+R discs
DVD mode
DVD mode
This unit not only plays DVDs, CDs and VHS tapes but also offers features for you to record to DVD discs
and edit them after that.The following features are offered with this unit.
Before you start
8
Functional overview
Front Panel
S-INPUT
VIDEO
L(MONO) - AUDIO - R
OPEN/CLOSE
VCR DVD
STOP PLAY
REC/OTR
OUTPUT SELECT
DUBBING
STOP/EJECT
REW
POWER
F.FWD REC/OTR
PLAY
CHANNEL
(TRACKING)
1
2
18 17
20
15 11*12*
63* 4
1621 19 14 13 10
9 8 7
5
1. POWER button / indicator (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer
standby mode, then turn the unit on.
Red LED lights up when power is on.
2. Cassette compartment (VCR)
Insert a videotape here.
3. A OPEN/CLOSE button (DVD)*
Press to open or close the disc tray.
4. VCR indicator
This indicator appears when the VCR output mode is selected.
5. DVD indicator
This indicator appears when the DVD output mode is selected.
6. Disc tray (DVD)
Place a disc when open.
7. AUDIO INPUT jacks (LINE2) (DVD/VCR)
Use to connect external equipment with standard audio cables.
8. VIDEO INPUT jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
9. S-VIDEO INPUT jack (LINE2) (DVD only)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
10. REC/OTR button (DVD)
Press once to start recording.
Press repeatedly to start a One-Touch timer Recording.
11. PLAY button (DVD)*
Press to start or resume play.
12. STOP button (DVD)*
Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.
13. OUTPUT SELECT button (DVD/VCR)
Press to select the component you wish to operate.
14. DUBBING button (DVD/VCR)
Press to start VCR to DVD (DVD to VCR) duplication
which you set in the SETUP menu.
15. CHANNEL L / K button (DVD/VCR)
Press to change the channel up and down.
16. PLAY button (VCR)
Press to start playback.
17. Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
18. REC/OTR button (VCR)
Press once to start a recording. Press repeatedly to
start a One-Touch timer Recording.
19. F.FWD button (VCR)
Press to rapidly advance the videotape, or view the pic-
ture rapidly in forward during playback. (Forward Search)
20. REW button (VCR)
Press to rewind the videotape, or to view the picture rapid-
ly in reverse during the playback mode. (Rewind Search)
21. STOP/EJECT button (VCR)
EJECTbutton-
Press to remove the videotape from the
cassette compartment when the power is on or off.
STOP button-Press to stop videotape playback.
Press to stop the proceeding timer recording in VCR.
Rear Panel
DVD DVD/VCR
ANTENNA
IN
AUDIO OUTAUDIO IN
S-VIDEO
AUDIO
OUT
DIGITAL
AUDIO OUT
COAXIAL
COMPONENT
VIDEO OUT
VIDEO OUTVIDEO IN
LY
IN
OUT
PB/CB
PR/CR
L
R
L
R
R
OUT
634521
7
10
98
1112
1. AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this unit.
2. S-VIDEO INPUT jack (LINE1)
(DVD only)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
3.
COMPONENT VIDEO OUTPUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with component video cables.
4. AUDIO INPUT jacks (LINE1) (DVD/VCR)
Use to connect external equipment with standard
audio cables.
5. AUDIO OUTPUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
6. TV ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
7. TV ANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
8. VIDEO OUTPUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with a standard video cable.
9. VIDEO INPUT jack (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
10. S-VIDEO OUTPUT jack (DVD only)
Use to connect the S-Video input of a TV monitor,AV
receiver or other equipment with an S-Video cable.
11. AUDIO OUTPUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
12. COAXIAL DIGITAL AUDIO OUTPUT jack
(DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other equipment with a coaxial digital input jack
with a digital coaxial cable.
Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause perma-
nent damage to the unit.
•
These jacks are
useful only in
DVD mode.
(
*
) The unit can also
be turned on by
pressing these
buttons.
Functional overview (cont’d)
Before you start
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
9
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
14
15*
16
17
19
18
20
21
22*
23
24*
25
26
27
28
30
1
2
3
4
5
6
7
8
9
10
11
12
13
29
7.
SETUP button (DVD/VCR)
Press to display the setup menu.
During DVD playback, press and
hold for more than 3 seconds
to switch to the progressive
scanning mode or the interlace
mode.
8.
REC MONITOR button (DVD)
Press to check the video signal
to be recorded before
attempting.
9.
MENU/LIST button (DVD)
Press to display the Disc menu.
Press to change ORIGINAL
and PLAYLIST on the TV
screen.
(VR mode only)
10.
TOP MENU button (DVD)
Press to display the top menu.
11. CLEAR/C.RESET button
(DVD/VCR)
• DVD mode
Press to clear the password once
entered, to cancel the program-
ming for CD, to clear the select-
ing marker number in the marker
setup mode or to clear the pro-
gram once entered in the timer
recording setting mode,etc.
• VCR mode
Press to reset the tape counter.
12.
SEARCH MODE button (VCR)
Press to call up the index or
time search menu.
13. CM SKIP button (DVD)
During playback, press to skip
30 seconds.
14. REC MODE/REC SPEED
button (DVD/VCR)
Press to switch the recording
speed.
15.
OPEN/CLOSE A button (DVD)*
Press to open or close the
disc tray.
16. AUDIO button (VCR)
During playback a HiFi video-
tape, press to change the
AUDIO OUT setting “HiFi”
and “MONO”.
17.
CH K / L buttons (DVD/VCR)
• DVD mode
Press to change the channel
up and down.
• VCR mode
Press to change the channel
up and down.
Press to adjust the tracking
during playback or in slow
motion of the videotape.
Also while playback is in still
mode, you can adjust the pic-
ture blurred vertically.
1.
POWER button (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have
been set, press to set the unit
in timer-standby mode. Press
to cancel the timer standby
mode, then turn the unit on.
2.
Number buttons (DVD/VCR)
Press to select channel numbers.
Press to select a title/chap-
ter/track on display or a TV
channel.
Also press to enter values for
the settings in the SETUP menu.
3.
DISPLAY button (DVD/VCR)
Press to display or change the
on-screen display.
4. VCR button
Press to activate the remote
control in VCR mode. (Refer
to page 10)
Press to select the VCR out-
put mode.
5. E button (DVD/VCR)
• DVD mode
During playback, press to fast
reverse.
Or when playback is paused,
press to play slow reverse.
• VCR mode
Press to rewind the videotape or
to view the picture rapidly in
reverse during the playback mode.
6.
REC/OTR button (DVD/VCR)
Press once to start a recording.
Press repeatedly to start a
One-Touch timer Recording.
18.
VIDEO/TV button (DVD/VCR)
Press to select VIDEO or TV
position.
19. SLOW button (VCR)
During playback, press to
view the videotape in slow
motion.
20. PAUSE F button
(DVD/VCR)
Press to pause play or recording.
21. DVD button
Press to activate the remote
control in DVD mode. (Refer
to page 10)
Press to select the DVD out-
put mode.
22. PLAY B button *
(DVD/VCR)
Press to start or resume play.
23. D button (DVD/VCR)
• DVD mode
During playback, press to fast
forward.
Or when playback is paused,
press to play slow forward.
• VCR mode
Press to rapidly advance the
videotape or view the picture
rapidly in forward during playback.
24.STOPC button *
(DVD/VCR)
Press to stop playback or
recording.
25. TIMER PROG. button
(DVD/VCR)
Press to display the timer
program setting menu.
26. ENTER button
(DVD/VCR)
Press to confirm or select
menu items.
27. K / L / { / B buttons
(DVD/VCR)
Press to select items or settings.
28. RETURN button
(DVD/VCR)
Press to return to the previ-
ously displayed menu screen.
29. ZOOM button (DVD)
During playback, press to
enlarge the picture on the
screen.
30. SKIP H button (DVD)
During playback, press to skip to
the previous chapter or track.
Or when playback is paused, press
to play reverse step by step.
SKIP G button (DVD)
During playback, press to skip to
the next chapter or track.
Or when playback is paused, press
to play forward step by step.
Remote Control
(
*
) In DVD mode, the unit can also be
turned on by pressing these buttons.
Functional overview (cont’d)
Before you start
Using a remote control
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote control and the remote sensor of the unit.
• Use within the operating range and angle as
shown.
• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the
remote sensor of the unit.
• Remote control for different devices can interfere
with each other. Avoid using remote control for
other equipment located close to the unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote control.
O
PEN
/C
L
O
S
E
VCR
D
V
D
S
T
O
P
P
L
A
Y
R
E
C
/
O
T
R
O
U
T
P
U
T
S
E
L
E
C
T
D
U
B
B
I
N
G
S
T
O
P
/
E
J
E
C
T
R
E
W
P
O
W
E
R
F
.
F
W
D
R
E
C
/
O
T
R
P
L
A
Y
C
H
A
N
N
E
L
(TR
ACK
ING
)
S
K
I
P
R
E
C
PA
U
S
E
P
E
N
T
E
R
M
E
N
U
P
L
A
Y
L
I
S
T
T
O
P
M
E
N
U
/
O
R
I
G
I
N
A
L
k
K
F
W
D
g
S
T
O
P
C
P
L
A
Y
B
R
E
V
h
H
G
Remote
control
60˚
Within about
23feet (7m)
Installing batteries in the remote control
Install two “AA” size batteries (supplied) matching
the polarity indicated inside battery compartment of
the remote control.
Note:
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Do not mix new and old batteries together.
• Do not use different kinds of batteries together,
although they may look similar, different batteries
may have different voltages.
• Make sure that the plus and minus ends of each
battery match the indications in the battery com-
partment.
• Remove batteries from equipment that is not going
to be used for a month or more.
• When disposing of used batteries, please comply
with governmental regulations or environmental
public instruction rules that apply in your country
or area.
• Do not recharge, short-circuit, heat, burn or disas-
semble batteries.
10
Because this product is a combination of a VCR and a DVD recorder, you must select first which com-
ponent you wish to operate with the OUTPUT SELECT button.
VCR DVD
OUTPUT SELECT
OPEN/CLOSE
VCR DVD
STOP PLAY
REC/OTR
OUTPUT SELECT
DUBBING
STOP/EJECT
REW
POWER
F.FWD REC/OTR
PLAY
CHANNEL
(TRACKING)
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAU SE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
DVD/VCR RECORDER
OUTPUT SELECT button
DVD indicator
VCR indicator
DVD button
VCR button
Press the VCR button on the remote control.
(Verify that the VCR indicator is lit.)
VCR MODE
Note
• Pressing only the OUTPUT SELECT button
on the front panel DOES NOT switch the mode
of the remote control.You MUST select the cor-
rect mode on the remote control.
• Pressing the SETUP or the TIMER PROG.
button switches the unit to the DVD mode.
Press the DVD button on the remote control.
(Verify that the DVD indicator is lit.)
DVD MODE
The VCR/DVD recorder Switching
Note
• Pressing only the OUTPUT SELECT button
on the front panel DOES NOT switch the mode
of the remote control.You MUST select the cor-
rect mode on the remote control.
• Pressing the SETUP or the TIMER PROG.
button switches the unit to the DVD mode.
Getting started
20
Channel setting (cont’d)
4
Select “Manual Preset” using
K / L buttons, then press
ENTER button.
Manual Preset menu will appear.
5
Select the channel number to
add or delete.
Press { button to move to a
lower channel number.
Press B button to move to a
higher channel number.
6
Select “Add” or “Delete”
using K / L buttons, then
press ENTER button.
The channel number will be
added or deleted from the chan-
nel memory.Then, the next chan-
nel number will appear so that
you can continue adding or delet-
ing channels.
7
Press SETUP button to exit.
Setup > Channel Preset > Manual Preset
CH18
Add
Delete
CH2
Add
Delete
Setup > Channel Preset > Manual Preset
Adding/deleting channels
The channels you no longer
receive or seldom watch can be
deleted from the memory.You also
may add channels into memory.
1
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
2
Select “SETUP” using { / B
buttons, then press ENTER
button.
SETUP menu will appear.
3
Select “Channel” using K / L
/ { / B buttons, then press
ENTER button.
Channel Preset menu will appear.
Setup > Channel Preset
Auto Preset
Manual Preset
TV Audio Select
Stereo
VCR DVD
Setup
Playback Setting
Setup Menu
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
2
3
4
5
7
6
30
Formatting a disc (cont’d)
Recording
If you are using a DVD-RW disc,
by default it will be VR mode.You
can change this to Video mode
from SETUP menu.
1
Press SETUP button to dis-
play SETUP/DISC menu.
SETUP/DISC menu will appear.
Screen:
2
Select “DISC” using { / B but-
tons, then press ENTER button.
DISC menu will appear.
* VR mode only
3
Select “Format” using K / L
buttons, then press ENTER
button.
Option window will appear.
* VR mode only
4
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Option window will appear.
* VR mode only
5
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Formatting will start.
6
Formatting is complete.
100% will be indicated.
This operation may take a
while to be completed.
Formatting
100%
Formatting
58%
Disc
Edit
Format
Finalize
Yes No
Disc Protect OFF ON
Are you sure?
Yes No
Disc
Edit
Format
Finalize
Yes No
Disc Protect OFF ON
Disc
Edit
Format
Finalize
Disc Protect OFF ON
Setup Menu
DVD-RW
DVD-RW
VR
DVD-RW
DVD-RW
Video
Reformatting a disc
Note
• When you reformat the disc,
the contents of the disc will
be erased.
• If you want to cancel format
at step 5, select “No”.
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
2
3
4
5
VCR functions Others Español
31
Recording
Basic recording
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
Note
• Recording starts immediately
and continues until the disc is
full or you stop recording.
• When the clock setting has
not been made, the space for
a date and time of title names
in the original or playlist will
be blank.
• When you record a TV pro-
gram which has Stereo and
SAP-audio on a DVD-RW/R
(Video mode), you have to
select the TV channel audio
(Stereo or SAP) beforehand.
Only the selected channel audio
will be recorded. Refer to
“Selecting the TV stereo or SAP”
on page 21 for more details.
• You cannot mix two formats
on one DVD-RW disc.
When you load a disc once
recorded before, the record-
ing format cannot be changed
even if you change it in
SETUP menu.
• You cannot change the
recording speed during the
REC pause mode.
• You can change a channel
during the REC pause mode.
Follow the steps below to record
TV programs.
First:
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Select a recording speed
using REC MODE/REC
SPEED button.
Refer to “Recording speed” on
page 27.
3
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 29-30.
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from SETUP menu.
“VR mode” has been selected as
the default. Refer to “Choosing
the recording format of a blank
disc” on page 29.
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
4
Select a desired channel to
record using CH K / L but-
tons or number buttons.
5
Press REC/OTR button to
start recording.
I mark will be displayed for 5
seconds.
To pause the recording, press
PAUSE F button. Press REC/OTR
button to restart the recording.
6
Press STOP C button to stop
the recording.
This operation may take a
while to be completed.
I
CH 1
SP 2:01 Rem.
This operation may take a
while to be recognized.
DVD
DVD-R
DVD-R
DVD-RW
DVD-RW
VR
DVD-RW
DVD-RW
Video
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
5
2
4
4
5
6
VCR functions Others Español
35
Recording
Timer recording (cont’d)
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
8
Select the channel number to
record using K / L buttons,
then press B button.
To record from external input, L1
or L2.
9
Select a recording media
using K / L buttons, then
press B button.
• To record on to a videotape, select
VCR.
• To record on to a disc, select DVD.
10
Select a recording speed
using K / L buttons.
Refer to “Recording speed” on page
27 for DVD or page 94 for VCR.
11
Press ENTER button when all
information required is
entered.
Your program setting will be
stored.
• To set another program, repeat
steps 5 to 11.
• To exit, press SETUP button.
12
Press POWER button to turn off.
indicator will appear on the
front display.
XP
- - -
JAN/12
Setup > Recording > Timer Programming
Date Start End CH Speed
10:30
PM
10:00
PM
CH8 DVD
DVD
VCR
- - -
JAN/12
Setup > Recording > Timer Programming
Date Start End CH Speed
10:30
PM
10:00
PM
CH8 DVD
DVD
VCR
- - -
JAN/12
Setup > Recording > Timer Programming
Date Start End CH Speed
10:30
PM
10:00
PM
CH8 DVD
DVD
VCR
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
8
11
9
1
Press POWER button so that
indicator disappears from
the front display.
2
Press TIMER PROG. button.
Timer Programming list will appear.
3
Check the information on the
list you will need.
4
To clear the timer programming,
select your desired program
using K / L buttons, then press
CLEAR/C.RESET button.
To correct the timer program-
ming, select your desired pro-
gram using K / L buttons, then
press ENTER button.
Next, correct the timer programming
using K/L/{/B buttons.
Finally, press ENTER button again.
5
Press TIMER PROG. button to exit.
6
Press POWER button to return
to the timer standby mode.
- - -
JAN/12
Setup > Recording > Timer Programming
XP
Date Start End CH Speed
10:30
PM
10:00
PM
CH8 DVD
DVD
VCR
Checking, canceling, or correcting the timer programming
information
Note
• Press TIMER PROG. button to
check the timer programming
in process.
When the timer recording is
in process, that program will
be red highlighted. In this case,
you cannot select any other
program.
10
Note
• After step 12, the unit will be
turned on automatically 2
minutes (For VCR recording,
10 seconds) in advance of the
recording time to start and
waits to start.Then the
recording will start at the
recording time you set.
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
4
4
2
5
6
Press STOP C button to stop the disc recording or STOP/EJECT C
A to stop the videotape recording on the front panel of the main
unit. STOP C button on the remote control is not effective.
To stop the timer recording in process
12
1
In stop mode, press TOP MENU
button to call up the MP3 menu.
• To exit the menu, press TOP
MENU button again.
2
Press
KK
/
LL
buttons to select a
desired folder (group) or track,
then press ENTER button.
When selecting track:
Playback will start.
When selecting the folder:
The files in the folder will appear.
Press K or L button to select the
track or folder you want, then
press
ENTER
button.
• Press PLAY B, ENTER or B but-
ton to move to the lower hierar-
chies.
• Press s button or RETURN
button to go to the previous
hierarchy.
• Press STOP C button to return
to the first item.
Hints for MP3 files:
• Folders are known as Groups,
files are known as Tracks.
•
Folders are accompanied by icon.
•
MP3 files are accompanied by icon.
Reproduction will start from the
selected track and go to the
next one in turn.
•
The system can recognize up to 255
groups (or folders) and up to 255 tracks.
•
The name of the group and track
can be displayed in up to 32 char-
acters. Unrecognizable characters
will be replaced with asterisks.
• If there are no files in the folder,
“No Files” will be displayed.
This unit recommends the files
recorded under the following cir-
cumstances:
•
Sampling frequency: 44.1kHz or 48kHz.
•
Constant bit rate: 112kbps - 320kbps.
FOLDER NAME 1
FOLDER NAME 2
FOLDER NAME 3
FOLDER NAME 4
FOLDER NAME 5
FOLDER NAME 6
1 FILE NAME 1
2 FILE NAME 2
DISC NAME
List of MP3 Files
1/2
45
Basic playback (cont’d)
Playing discs
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
1
Press POWER button, then
press DVD button.
When you are playing a DVD or
an audio CD, turn the TV on and
be sure to select the input to
which the unit is connected.
2
Press OPEN/CLOSE A but-
ton to open the disc tray.
The disc tray will open.
3
Place the disc onto the disc
tray with its label facing up
and make sure to align the
disc to the disc tray guide.
4
Press PLAY B button to start
playing.
Playback will start.
If you are playing a DVD-Video
disc, a menu may appear.
Refer to pages 46-47 for details
about a disc menu.
5
Press STOP C button to stop
playing.
MP3
MP3
CD
CD
DVD-V
DVD-V
Note
• Some discs may start playing
automatically.
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
2
5
4
For MP3 playback
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
2
2
2
Note
• The audio source of MP3 files
cannot be recorded as digital
sound by an MD or DAT deck.
• Files whole extension other
than “.mp3 (MP3)” will not be
listed in the MP3 menu.
• Some unplayable folders or
tracks may be listed in the
MP3 menu due to the
recording status.
46
Basic playback (cont’d)
Playing discs
Note
• Menus vary among discs.
Refer to the information
accompanying the disc for
details.
Playing discs using the disc menu
A DVD disc contains a disc menu
that describes the contents or
allows you to customize the play-
back. For example, the menu may
offer choices for subtitle lan-
guages, special features, or chapter
selection.
Sometimes these are displayed
automatically when you start play-
back, otherwise only appear when
you press MENU / LIST button.
First:
1
Press MENU / LIST button.
The DVD main menu will appear.
If the feature is not available,
may appear on the TV screen.
2
Select an item using K / L /
{ / B buttons, then press
ENTER button to confirm.
Continue this step to set up all
the features you want or to start
playing the disc from the menu.
MENU / LIST button:
Displays a DVD disc menu which
varies with the disc and may be
the same as the ‘Title menu.’
K / L / { / B buttons:
Moves the cursor around screen.
Enter button:
Selects the currently highlighted
menu option.
Number buttons:
Selects a numbered menu option
(some discs only). Press ENTER
button after.
3
Press MENU / LIST button to
exit the menu.
DVD
DVD-V
DVD-V
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
2
3
2
1
2
60
Information on disc editing (cont’d)
Editing
Editing original titles
The following items can be used to edit the original
titles.
• Deleting titles (Refer to page 65)
• Deleting parts of titles (Refer to pages 66-67)
• Putting names on titles (Refer to pages 67-68)
• Setting or clearing chapter markers (Refer to
pages 69-70)
• Setting pictures for thumbnails (Refer to pages
70-71)
• Setting titles to protect (Refer to page 72)
• Releasing titles from protecting (Refer to page 73)
Editing playlists
You can create a playlist from original titles, so that
you can edit as you prefer without losing original
titles.
The following items you can edit with a playlist.
• Deleting titles (Refer to page 74)
• Deleting parts of titles (Refer to pages 75-76)
• Putting names on titles (Refer to pages 76-77)
• Setting or clearing chapter markers (Refer to
pages 78-79)
• Setting pictures for thumbnails (Refer to pages
79-80)
• Adding titles to a playlist (Refer to page 81)
• Deleting a playlist (Refer to page 82)
Editing discs in VR mode
For discs in VR mode, you can edit from “Original” menu or “Playlist” menu, which is created from the
original.
Note
•
Original titles once edited will not remain as recorded originally.When you want to leave the original as
it is, edit the playlist as you prefer.
61
Editing DVD-RW discs in Video mode
Editing
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
Deleting titles
You can delete titles which you
do not need anymore.
Be sure to know that the titles
once deleted cannot be brought
back to the disc.
When the last title in the title list
in Video mode is deleted, the disc
space to record will be increased.
First:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Titlelist will appear.
Screen:
3
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Edit menu will appear.
4
Select “Title Delete” using K
/ L buttons, then press
ENTER button.
Option window will appear.
5
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Title will be deleted.
6
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
This operation may take a
while to be completed.
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
Yes No
Writing to Disc
JAN/ 1 1:00AM CH12 XP
Disc > Edit
1
0:01:25
Title Delete
Edit Title Name
Chapter Mark
Yes No
JAN/ 1 1:00AM CH12 XP
Disc > Edit
1
Title Delete
Edit Title Name
Chapter Mark
0:01:25
JAN/ 1 1:00AM CH12 XP
Disc > Edit
1 1 32
54
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Disc
Edit
Format
Finalize
DVD
DVD-RW
DVD-RW
Video
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
2
3
4
5
1
6
68
Editing DVD-RW discs in VR mode (Original) (cont’d)
Editing
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
5
Select “Edit Title Name”
using K / L buttons, then
press ENTER button.
A window for entering a title
name will appear.
6
To enter a title name, follow
the steps of "Guide to edit
title name" on this page.
character set
area for entering title names
When you finish entering a title
name, press ENTER button.
7
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
The name you entered will be
activated for the title.
8
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
This operation may take a
while to be completed.
Disc > Edit > Original > Edit Title Name
1
A B C
a b c
1 2 3
@ ! ?
abc
Yes No
Writing to Disc
Disc > Edit > Original > Edit Title Name
1
0:01:25
A B C
a b c
1 2 3
@ ! ?
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Original > Edit Title Name
1
0:01:25
A B C
a b c
1 2 3
@ ! ?
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
JAN/ 1 1:00AM CH12 XP
0:01:25
ON
Disc > Edit > Original
1 1 32
54
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Press
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
<space>
abc
def
ghi
jkl
mno
pqrs
tuv
wxyz
<space> <space>
! ” # $ %
& ’ ( )
+ , - . / : ;
< = > ?
@ [ ] ^
_ { | }
2
3
4
5
6
7
8
9
0
1
ABC
abc
Select
@ ! ?
123
1
1
2
3
4
5
6
7
8
9
0
*1 Press button, character set will be changed
to the " @
!?
" mode automatically.
[
Step1
]
: Select a desired character set using K
/
L
buttons, then press
ENTER button.
[
Step2
]
: Press Number buttons following by the list
below.
[
Guide to edit title name
]
• To delete letters, press CLEAR/C.RESET button
repeatedly. Holding CLEAR/C.RESET button
to delete all letters.
• To go on to the next entering area for letters,
press button.
A B C
a b c
1 2 3
@ ! ?
B
• You can enter up to 30 letters.
*1 *1
*
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
6
8
5
4
7
6
3
69
Editing DVD-RW discs in VR mode (Original) (cont’d)
Editing
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
Setting or clearing chapter markers
You can put chapter markers in each title.
Once a chapter is marked, you can use it
for the chapter search feature.
You can put a chapter marker anywhere
you want.
When the number of chapter markers in
the original list comes to 999 in total, you
cannot add any more chapter markers.
First:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using
K
/
L
but-
tons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
3
Select “Original” using
{
/
B
but-
tons, then press ENTER button.
Original list will appear.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
5
Select “Chapter Mark” using
K / L buttons, then press
ENTER button.
Option window will appear.
6
Use
SKIP
H
/
G, E
,
D,
PLAY B, and PAUSE F but-
tons to decide the point at
which you will create a new
chapter marker. Or, use
SKIP
H
/
G to decide a chapter
marker that you will delete.
Select “Add” or “Delete”
accordingly using K / L but-
tons, then press ENTER but-
ton.
Option window will appear.
<Add>:
1
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF
Yes No
JAN/ 1 1:00AM CH12 XP
ON
Add
Delete
Disc > Edit > Original
Chapter 1/1
F
Disc > Edit > Original
1
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Protect OFF
JAN/ 1 1:00AM CH12 XP
ON
Add
Delete
Chapter 1/1
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
JAN/ 1 1:00AM CH12 XP
0:01:25
ON
Disc > Edit > Original
1 1 32
54
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Disc > Edit
Original
Disc
Edit
Format
Finalize
Disc Protect OFF ON
DVD
DVD-RW
DVD-RW
VR
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
4
3
6
5
2
1
Instructions continue on page 70.
6
6
71
Editing DVD-RW discs in VR mode (Original) (cont’d)
Editing
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
5
Select “Index Picture Set”
using K / L buttons. Use SKIP
H
/
G
,
E, D, PLAY B,
and PAUSE F buttons to
decide the picture you want
to select as a thumbnail.Then
press ENTER button.
Option window will appear.
6
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
A picture for thumbnail will be
set.
7
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
This operation may take a
while to be completed.
Disc > Edit > Original
1
Yes No
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
ON
Writing to Disc
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Original
1
0:01:25
Yes No
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
ON
JAN/ 1 1:00AM CH12 XP
F
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
JAN/ 1 1:00AM CH12 XP
0:01:25
ON
Disc > Edit > Original
1 1 32
54
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
7
3
4
5
6
5
5
72
Editing DVD-RW discs in VR mode (Original) (cont’d)
Editing
To prevent accidental editing or
erasing the titles, you can protect
them from the original menu.
First:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
5
Select “Protect OFF ➔ ON”
using K / L buttons, then
press ENTER button.
Option window will appear.
6
Select “Yes” using { / B but-
tons, then press ENTER button.
7
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
To protect a whole disc:
Select “Disc Protect” from Disc
menu, then select “Yes”.
Refer to “Setting a disc to pro-
tect” on page 42.
This operation may take a
while to be completed.
Disc > Edit > Original
1
Yes No
Writing to Disc
JAN/ 1 1:00AM CH12 XP
ON
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
Disc > Edit > Original
1
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
Yes No
JAN/ 1 1:00AM CH12 XP
ON
Disc > Edit > Original
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect OFF
JAN/ 1 1:00AM CH12 XP
0:01:25
ON
Disc > Edit > Original
1 1 32
54
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Disc > Edit
Original
Disc
Edit
Format
Finalize
Disc Protect OFF ON
DVD
DVD-RW
DVD-RW
VR
Setting titles to protect
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
1
2
3
4
7
5
6
Note
• The protected title will be
marked with a key icon in the
original list.
73
Editing DVD-RW discs in VR mode (Original) (cont’d)
Editing
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
You are allowed to release the
titles protecting feature once pro-
tected.
First:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
3
Select “Original” using { / B
buttons, then press ENTER
button.
Original list will appear.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Original menu will appear.
5
Select “Protect ON ➔ OFF”
using K / L buttons, then
press ENTER button.
Option window will appear.
6
Select “Yes” using { / B but-
tons, then press ENTER button.
The key icon will disappear from
the title in the original list.
7
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
This operation may take a
while to be completed.
Disc Edit > Original
2
Yes No
Writing to Disc
JAN/ 1 2:00AM CH12 XP
OFF
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON
Disc Edit > Original
2
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON
Yes No
JAN/ 1 2:00AM CH12 XP
OFF
B
Disc Edit > Original
2
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Protect ON
JAN/ 1 2:00AM CH12 XP
0:01:25
OFF
Disc > Edit > Original
1 1 32
54
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Disc > Edit
Original
Disc
Edit
Format
Finalize
Disc Protect OFF ON
DVD
DVD-RW
DVD-RW
VR
Releasing titles from protecting
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
1
2
3
4
7
5
6
76
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Editing
7
Select “Delete” using K / L
buttons, then press ENTER
button.
Option window will appear.
8
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
Part of a title will be deleted.
9
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
This operation may take a
while to be completed.
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Start
End
Preview
Delete
Yes No
Writing to Disc
JAN/ 1 1:00AM CH12 XP
1
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture
Start
End
Preview
Delete
Yes No
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
You can put title names on the
titles and change the names from
this menu.
The names you put on the titles
will be displayed on a titlelist.
First:
1
Press SETUP button. Select
“DISC” using
{ / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER button.
Original/PlayList menu will appear.
Screen:
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
Disc > Edit > Playlist
1 1 32
54
Add New
Title
Delete
Playlist
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Disc > Edit
Original
Disc
Edit
Format
Finalize
Disc Protect OFF ON
DVD
DVD-RW
DVD-RW
VR
Putting names on titles
ZOOM SKIP SKIP
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
9
7
8
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
1
2
3
Note
• You cannot select “Scene
Delete” when the number of
chapter markers in the original
or playlist is more than 900.
78
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Editing
You can put chapter markers in
each title. Once a chapter is
marked, you can use it for the
chapter search feature.
You can put a chapter marker
anywhere you want.
When the number of chapter
markers in the playlist comes to
999 in total, you cannot add any
more chapter markers.
First:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
5
Select “Chapter Mark” using K / L
buttons, then press ENTER button.
Option window will appear.
6
Use
SKIP
H
/
G
,
E
,
D
,
PLAY
B
, and PAUSE
F
buttons to
decide the point at which you will
create a new chapter marker. Or,
use SKIP
H
/
G
to decide a
chapter marker that you will
delete. Select “Add” or “Delete”
accordingly using
K
/
L
buttons,
then press ENTER button.
Option window will appear.
<Add>:
1
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Add
Delete
Yes No
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
Chapter 1/1
F
Disc > Edit > Playlist
1
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Add
Delete
JAN/ 1 1:00AM CH12 XP
Chapter 1/1
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
0:01:25
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
1 1 32
54
Add New
Title
Delete
Playlist
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Disc Setting
Disc
Edit
Format
Finalize
Disc Protect OFF ON
DVD
DVD-RW
DVD-RW
VR
Setting or clearing chapter markers
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
1
2
3
4
5
6
6
6
79
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Editing
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
<Delete>:
• You cannot delete the first
chapter of each title.
7
S
elect “Yes” using { / B but-
tons, then press ENTER button.
When you select “Add” at step 6, a
new chapter marker will be created
at the point you have decided.
When you select “Delete” at step 6,
the chapter marker you have selected
will be deleted.
<Add>:
The chapter marker which you
selected will be deleted.
<Delete>:
8
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
This operation may take a
while to be completed.
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Add
Delete
Yes No
Writing to Disc
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
Chapter 2/2
This operation may take a
while to be completed.
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Add
Delete
Yes No
Writing to Disc
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
Chapter 1/1
1
0:01:25
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Add
Delete
Yes No
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
Chapter 2/2
F
Note
• If a selected picture for a
thumbnail is deleted by delet-
ing a part of a title, a default
picture will be selected.
Setting pictures for thumbnails
You can set a picture to each title for
a thumbnail. It helps you to remember
the contents of the title you are play-
ing.The beginning picture has been
selected as the default.
First:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
Disc > Edit
Original
Disc
Edit
Format
Finalize
Disc Protect OFF ON
DVD
DVD-RW
DVD-RW
VR
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
8
7
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
ENTER
DISPLAY
TUV WXYZ
DVD
1
1
2
Instructions continue on page 80.
80
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Editing
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
4
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
Playlist menu will appear.
5
Select “Index Picture Set”
using K / L buttons. Use
SKIP
H
/
G
,
E, D, PLAY B,
and PAUSE F buttons to
decide the picture you want
to select as a thumbnail.Then
press ENTER button.
Option window will appear.
6
Select “Yes” using { / B but-
tons, then press ENTER but-
ton.
A picture for thumbnail will be
set.
7
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
This operation may take a
while to be completed.
1
Yes No
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
Writing to Disc
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
Disc > Edit > Playlist
1
0:01:25
Yes No
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
JAN/ 1 1:00AM CH12 XP
F
Disc > Edit > Playlist
1
Title Delete
Scene Delete
Edit Title Name
Chapter Mark
Index Picture Set
0:01:25
JAN/ 1 1:00AM CH12 XP
Disc > Edit > Playlist
1 1 32
54
Add New
Title
Delete
Playlist
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
7
3
4
5
6
5
5
81
Editing DVD-RW discs in VR mode (Playlist) (cont’d)
Editing
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
You can add or delete a title in
the playlist as you prefer.
You can add titles to a Playlist up
to 99.
First:
1
Press SETUP button. Select
“DISC” using { / B buttons,
then press ENTER button.
DISC menu will appear.
2
Select “Edit” using K / L but-
tons, then press ENTER but-
ton.
Original/PlayList menu will appear.
Screen:
3
Select “PlayList” using { / B
buttons, then press ENTER
button.
Playlist will appear.
4
Select “Add New Title” using
K / L / { / B buttons, then
press ENTER button.
Original list will appear.
5
Select a desired title using K /
L / { / B buttons, then press
ENTER button.
6
After writing to disc is com-
pleted, press SETUP button
to exit DISC menu.
To delete a title from Playlist,
refer to “Deleting titles” on page
74.
To delete a Playlist, refer to
“Deleting a Playlist” on page 82.
Disc > Edit > Playlist
6
1 1 32
54
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM
JAN/1 5:00AM
JAN/1 3:00AM
JAN/12 8:00PM
Disc > Edit > Playlist > Add New Title
Writing to Disc
58%
Disc > Edit > Playlist > Add New Title
1 1 32
JAN/12 5:00PM JAN/12 8:00PMJAN/10 10:30AM
Disc > Edit > Playlist
1 1 32
54
Add New
Title
Delete
Playlist
JAN/1 1:00AM
JAN/1 4:00AM
JAN/1 2:00AM JAN/1 3:00AM
JAN/1 5:00AM
Disc > Edit
Original
Disc
Edit
Format
Finalize
Disc Protect OFF ON
DVD
DVD-RW
DVD-RW
VR
Adding titles to a Playlist
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
1
2
3
4
6
5
86
Changing the SETUP menu
Language setting
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
3
Select “Playback” using K / L /
{ / B
buttons, then press
ENTER button.
Option window will appear.
4
Select a desired item using K / L buttons, then press
ENTER button.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
Setup
Playback Setting
Setup Menu
Note
• Only the languages supported
by the disc can be selected.
• Audio Language setting may
not be available to some
discs.
• You can change or switch off
the subtitles on a DVD disc
also from the disc menu if it
is available.
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
2
Press STOP button if you are playing a disc.
3
4
5
4
87
Changing the SETUP menu
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
Language setting (cont’d)
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
English
French
Spanish
Other
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
Original
English
French
Spanish
Other
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
OFF
English
French
Spanish
Other
Disc Menu Language (Default : English)
Set the language for Disc Menu.
•
Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
•
Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
•
When Original is selected, the
audio language will be in the
disc’s default language.
•
Select a setting using K / L
buttons, then press ENTER
button.
Your setting will be activated.
Audio Language (Default : Original)
Set the Audio language.
Subtitle Language (Default : OFF)
Set the subtitle language.
If “Other” is selected, press 4-digit code using number buttons.
a
ge
e
C
ontrol
Audio
English
Original
All
OFF
ON
OFF
English
French
Spanish
Other
Code Input
- - - -
•
When you finish entering
the code, press ENTER
button. Refer to the lan-
guage code table on page
101.
5
Press SETUP button to exit SETUP menu.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
OFF
4:3 Letter Box
All
English
Original
OFF
ON
DVD
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
OFF
4:3 Letter Box
All
English
Original
OFF
ON
PCM
Dolby Digital
DTS
Digital Out
Set the digital audio output.
•
Select a setting using K / L
buttons, then press ENTER
button.
Option window will appear.
Proceed to steps A,B or C.
90
Changing the SETUP menu
Audio setting
1
Press SETUP button to display SETUP/DISC menu.
SETUP/DISC menu will appear.
2
Select “SETUP” using { / B buttons, then press
ENTER button.
SETUP menu will appear.
3
Select “Playback” using K / L /
{ / B
buttons, then press
ENTER button.
Option window will appear.
4
Select a desired item using K / L buttons, then press
ENTER button.
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
Setup
Playback Setting
Setup Menu
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
2
Press STOP button if you are playing a disc.
3
4
5
Choose the appropriate Audio settings for your equipment.
It will only affect DVD discs during playback.
Note
• Dynamic Range Control func-
tion is available only on the
discs which are recorded in
the Dolby Digital format.
93
Changing the SETUP menu
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
Settings for Parental lock level (cont’d)
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
All
8
7
6
5
4
3
2
1
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
All
8
7
6
5
4
3
2
1
Password
- - - -
Parental Lock (Default :All)
Set the Parental Lock level.
•
Change the parental level
using K / L buttons, then
press ENTER button.
Option window will appear.
Proceed to steps A or B.
•
Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
•
Select “Yes” using s / B
buttons, then enter a new
password using Number
buttons.
Your setting will be activated.
5
Press SETUP button to exit SETUP menu.
A password has been set already
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
All
8
7
6
5
4
3
2
1
Change Password?
Yes No
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
All
8
7
6
5
4
3
2
1
Change Password?
Yes No
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
All
8
7
6
5
4
3
2
1
Password
- - - -
Setup > Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
4:3 Letter Box
All
English
Original
OFF
ON
OFF
DVD
All
8
7
6
5
4
3
2
1
Password
* * * *
Change the password
• If you
select “No”, proceed
to Step 5.
Ye s
Ye s
Note
• Press CLEAR/C.RESET button
to erase numbers entered
incorrectly.
• When you forget the pass-
word or you want to clear all
settings in Parental lock, enter
4,7,3,7 using Number buttons
in option window. Password
will be cleared and parental
levels will be set to All.
• If you
select “No”, proceed
to Step 5.
•
Enter the current password
using Number buttons.
A
B
A password has not been set yet
95
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
VCR functions
Recording and One-touch timer recording (cont’d)
This feature allows you to set the
recording length simply by pressing
REC/OTR button on the remote
control or the front panel of the unit.
First:
1
During normal recording,
press REC/OTR button to
begin one-touch timer
recording.
You can select a fixed recording
time by pressing the REC/OTR
button repeatedly.
When one-touch timer recording
is finished, the unit will turn off
automatically.
To change the recording length
during the one-touch timer
recording, press REC/OTR repeat-
edly until the desired length
appear.
To cancel the one-touch timer
recording within the specified
time, press STOP C button.
VCR
VCR
VCR
SETUP
TIMER PROG.
STOP
PLAY
REC/OTR
ENTER
1
One-touch timer recording
(0:30) (1:00)
(Normal recording)
(7:30)(8:00)
Search
1
11
An index mark will be assigned at
the beginning of each recording
you make.You may skip to a specif-
ic marked point by following the
steps below.
First:
1
Press SEARCH MODE button
so that the index search
menu appears.
2
Enter the number of record-
ings you wish to skip using
Number buttons with in 30
seconds.
3
Press g/h buttons to
start index search.
If you want to go in the forward
direction, press g button.
If you want to go in the reverse
direction, press
h button.
After index search, the VCR will
play the videotape automatically.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
Beginning
of tape
End
of tape
CURRENT PROGRAM
INDEX MARK
INDEX SEARCH
03
VCR
VCR
VCR
Index search
POWER
REC SPEED
REC MODE
AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
123
456
78
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C.RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
1
3
2
Note
• Every time a videotape is
recorded, an index mark is
written on the videotape.
Note
•
The remaining recording time
will appear on the display panel
during an one-touch timer
recording. Press DISPLAY but-
ton to see it on the TV screen.
•
You cannot pause a one-
touch timer recording.
•
If OTR is finished in VCR during
playback or REC mode in DVD, the
VCR will be in STOP mode and
the DVD keeps the current mode.
•
Unlike a timer recording, you can
perform the following operations
during a one-touch timer recording.
-
Turning the power off
-
Using REC or STOP
C
buttons.
99
Others
Recording Playing discs EditingBefore you start Connections Getting started
Changing the SETUP menu
VCR functions Others Español
Troubleshooting (cont’d)
Symptom Remedy
The tape does not play.
• No videotape is inserted.
Recording does not start immediately
after you press REC/OTR button.
• Make sure the videotape has a record tab when you record to a
videotape. If needed, cover the hole with cellophane tape.
The remote control does not function.
• Check if a videotape is in this unit.
The motor rotates even when playback /
recording is stopped.
• The motor may rotate for the duration of approximately 5
minutes for efficient operation. This is not a malfunction.
Picture noise appears.
• Head cleaning for VCR may be necessary.
Refer to “AUTO HEAD CLEANING”.
• Adjust tracking control for better picture by pressing
CHANNEL (o /p) buttons on this unit or CH ( o /p)
buttons while you are playing a videotape.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
V
C
R
D
V
D
"Repairing" appears on the display.
The disc tray does not open when you
press OPEN/CLOSE A button.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about four hours.
Repairing
Disc Error
Recording Error
Recording Error
Region Error
Parental Lock On
Recording Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
--- Please eject the disc. ---
Playback is not authorized in your
region.
--- Please eject the disc. ---
The current selected parental level
Prohibits playback.
This program is not allowed
to be recorded.
Recording Error
This program is not
recordable in Video mode.
This program is not allowed to
be recorded on this disc.
Unplayable disc is inserted
in the unit.
The disc is upside down.
Insert the standardized disc which
bear the marks on page 43.
Insert the disc with the labeled side
facing up.
Recording Error
This disc is protected and not
recordable.
Can not record on this disc.
CauseError message Solution
Playback is not authorized
in the region of the DVD-Video
disc which you inserted in the unit.
The current selected parental
level in the SETUP Menu
prohibits playback.
The recording function encountered
the copy prohibited program.
You are trying to record the copy-
once program onto the DVD-RW
disc in Video mode.
You are trying to record onto the
disc which is unrecordable, or the
disc status is unable to record.
The disc is dirty.
The disc is damaged.
You are trying to record the copy-
once program onto the DVD-RW
disc which is not compatible with
CPRM.
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Insert the DVD-Video disc with
region codes 1 or ALL.
Check the "Parental Lock" setting
(pages 92-93).
You cannot record copy prohibited
programs.
Set "DVD-RW Recording Format"
to "VR mode" (page 29).
Release the disc protect setting
in the Disc Setting menu (page 42).
Insert the recordable disc, and
ensure the disc status satisfies the
recording requirements (pages 27-28).
Clean the disc with a cleaning cloth.
Replace the disc.
Insert the DVD-RW disc
(ver.1.1 compatible with CPRM).
Recording Error
Disc is full.
(No area for new recording)
You are trying to record onto
the disc which has no space
for recording.
Insert the recordable disc with
enough recording space.
… 93 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp DVRW340U bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp DVRW340U in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 2,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info