13185
42
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
1
CONTENTS
PAGE
Important Information .........................................2 ~ 3
Important Safeguards .........................................3 ~ 4
Supplied Accessories ............................................... 5
Before Operating Your Television ............................. 5
Antenna Connections .........................................5 ~ 6
Quick Reference Control Operation .................. 7 ~ 9
EZ SETUP during First Power On .......................... 10
Demo Mode ............................................................ 11
Accessing the MAIN MENU screen without
Remote Control ...................................................... 11
Language ............................................................... 12
Sleep Timer ............................................................12
Video Adjust ........................................................... 13
COLOR TELEVISION
This operating manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 8, 41.
FRENCH is on page 9.
PAGE
Audio Select ........................................................... 14
MTS (MULTICHANNEL TV SOUND) .................. 14
Closed Caption ....................................................... 15
Parent Control ................................................ 16 ~ 26
V-CHIP ........................................................ 16 ~ 23
VIEW TIMER .............................................. 24 ~ 26
Energy Save ........................................................... 26
Set Up ............................................................ 27 ~ 32
EZ Setup ............................................................. 27
Channel Setting .......................................... 28 ~ 30
Blue Screen ........................................................ 30
Personal Reference ............................................ 31
Universal Plus Function ...................................... 32
Using the Video and Audio Input Jacks .......... 33 ~ 34
Operation of Remote Control ......................... 35 ~ 39
Before Calling for Service ............................... 40 ~ 41
Calling for Service .................................................. 40
Specifications ......................................................... 42
Limited Warranty .................................................... 43
L OPERATION MANUAL L
A
s an
E
NERGY
S
TAR
®
P
artner, SHARP has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
E
NERGY
S
TAR
®
is a
U.S.
registered
trademark.
MODEL
25R-S100
7290 GJ
01-02 25R-S100.p65e 19/1/01, 4:38 PM1
2
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Important Information
There are two important reasons for prompt warranty registration of your new SHARP television set,
using the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT LIMITED WARRANTY CLAUSE ON THE LAST PAGE.
WHAT IS ENERGY STAR
®
TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1
billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR
®
models will reduce that energy leakage by up to 75 percent. Ultimately, this will mean more than
$500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY
STAR
®
models, it would reduce carbon dioxide emissions by five million tons every year equivalent to
eliminating the pollution from more than one million cars.
By using ENERGY STAR
®
products, you will save money on your electric bills and use less energy. That
makes good economic sense and its good for our environment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
Note to CATV system installer: This reminder is provided to call the CATV system installers attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TVs
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
01-02 25R-S100.p65e 19/1/01, 4:38 PM2
3
CAUTION: Please read all of these instructions before you operate your television and save these
instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water for example, near a bathtub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturers instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable
operation of the television equipment and to protect it from overheating, these openings must not be blocked
or covered. This television equipment should not be placed in a built-in insulation such as a bookcase
unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and
defeat this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
13. Follow all warnings and instructions marked on the television equipment.
Important Information (Continued)
WARNING FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the users authority to operate this
equipment.
Important Safeguards
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries
Alliance:www.eiae.org
03-04 25R-S100.p65e 19/1/01, 4:38 PM3
4
15. For added protection for this television equipment during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This
will prevent damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance this indicates a need
for service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
NEC - NATIONAL ELECTRICAL CODE
ANTENNA LEAD-IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CLAMPS
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
Important Safeguards (Continued)
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of
the National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
03-04 25R-S100.p65e 19/1/01, 4:38 PM4
5
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
CATV
PAU SE
TV
DVD VCR
FLASHBACK
DISPLAY
INPUT
TV CATV VCR DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
Note:
Location
For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to the interference of the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size AA). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
Before Operating Your Television
Battery
Cover
Pull up
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control/Part Number
RRMCG1626CESA
Antennas
The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
Antenna Connections
05-06 25R-S100.p65e 19/1/01, 4:39 PM5
6
OUT
A
IN
B
REAR OF TV
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
or
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR OF TV
A. Combination VHF/UHF Antennas
OUTDOOR ANTENNA CONNECTION
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
CABLE TV (CATV) CONNECTION
A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
Some cable TV companies offer premium pay channels. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
A position on the RF switch (not supplied) : You can view all unscrambled channels using the TVs
channel keys.
B position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converters channel keys.
Note:
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
B. Separate VHF/UHF Antenna
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75 ohm system is generally a round cable
with F-type connector that can easily be
attached to a terminal without tools (not
supplied).
2. A 300 ohm system is a flat twin-lead cable
that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR (not
supplied).
Antenna Connections (Continued)
05-06 25R-S100.p65e 19/1/01, 4:39 PM6
7
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Infrared Transmitter Window
DISPLAY
Press Displays receiving channel for
four seconds.
Press again Removes display.
Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press Switch to external video
INPUT 1 mode.
Press 2 times Switch to external video
INPUT 2 mode.
Press 3 times Switch back to the
original TV mode.
See page 34.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 35)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
See pages 28 ~ 30 for channel
presetting.
• Moves the “
” mark of the MENU
screens.
MUTE
Press Mutes sound.
Press again Restores sound.
CLOSED CAPTION appears when
sound is muted.
Note:
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote
control, place it under a fluorescent light or other lighting.
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
The degree of illumination will vary depending on the strength of lighting used.
The degree of illumination will decrease with time and depending on the temperature.
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
Sunlight and fluorescent lighting are the most effective when charging the display.
POWER
Press On.
Press again Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 31.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
CATV/DVD-TV/VCR MODE SELECT
SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
See page 35.
Basic Remote Control Functions
Quick Reference Control Operation
L Location of Controls (ENGLISH)
Front Panel
Quick Reference Control Operation
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
Press both at the same time to
access the MAIN MENU screen.
POWER
Press On.
Press again Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press Accesses MAIN MENU.
Press again Exits MAIN MENU.
VIDEO/AUDIO IN2 TERMINALS
07-09 25R-S100.p65e 22/1/01, 1:45 PM7
8
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV CATV VCR DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
ALIMENTACION (POWER)
Pulsando Enciende (On).
Pulsando nuevamente Apaga (Off).
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier canal
empleando las teclas.
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
PREFERENCIAS PERSONALES
Con los botones Personal Preference
puede programar sus programas favoritos
utilizando las cuatro categorías A, B, C y D.
Puede acceder a los canales rápidamente
utilizando estos botones.
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
() Disminuye el sonido.
En modo de MENU cambia
o selecciona el ajuste del televisor.
PREPARACION (MENU)
Pulsando Accede al MENU PRINCIPAL.
Pulsando nuevamente Sale del
MENU PRINCIPAL.
CONMUTADOR SELECTOR DE
TELEVISOR/TV POR CABLE (CATV/
DVD-TV/VCR)
En la posición TV/VCR, el mando envia
los comandos de alimentación y selección
de canales (botones de canal superior/
inferior y de acceso aleatorio) a un
televisor y a un control de VCR.
En la posición CATV/DVD, envia los
comandos de alimentación y selección de
canales a un convertidor de TV por cable
y a un control de DVD.
Note:
Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del control
remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.
El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.
El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.
La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
Ventanilla del transmisor de infrarrojos
VISUALIZACION (DISPLAY)
Pulsando Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente Elimina la
visualización.
En el modo de Closed Caption se
muestra el canal de recepción por un
corto tiempo.
ENTRADA (INPUT)
Pulsando Cambia al modo de entrada
1 del vídeo externo.
Pulsando 2 veces Cambia al modo de
entrada 2 del vídeo externo.
Pulsando 3 veces Vuelve al modo TV
original.
INTRODUCIR (ENTER)
Se utiliza en algunos casos en los cuales
una Caja de Inversor de Cable requiere
una orden enter después de seleccionar
los canales, al usar el teclado a distancia.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal superior.
(9) Selecciona el siguiente canal inferior.
En el modo de MENU, mueve la marca
.
SILENCIAMIENTO (MUTE)
Pulsando Silencia el sonido.
Pulsando nuevamente Restaura el
sonido.
CLOSED CAPTION aparece automática-
mente cuando el sonido es silenciado.
Siempre y cuando la transmisión tenga
esta señal.
CONTROLES DEL DVD/VIDEO
L Ubicación de los controles (ESPAÑOL)
Panel Delantero
Referencia rápida de los controles de operación
Funciones Basicas Del Control Remoto
AUMENTO/DISMINUCION
DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
() Disminuye el sonido.
CANAL SUPERIOR/INFERIOR (CH) MENU
(8) Selecciona el siguiente canal superior.
(9) Selecciona el siguiente canal inferior.
Pulse ambos al mismo tiempo para acceder a
la pantalla de MENU PRINCIPAL.
ALIMENTACION (POWER)
Pulsando Enciende (On).
Pulsando nuevamente Apaga (Off).
ZONA DEL SENSOR DEL
MANDO A DISTANCIA
MENU (MENU)
Pulsando Accede al MENU
PRINCIPAL.
Pulsando nuevamente Sale del MENU
PRINCIPAL.
TERMINALES DE ENTRADA
VIDEO/AUDIO IN2
07-09 25R-S100.p65e 19/1/01, 4:39 PM8
9
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV CATV VCR DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Fenêtre d’émission du signal infrarouge
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau pour faire disparaître
le canal.
Pour afficher temporairement le canal
reçu en mode Sous-titres.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode
ENTRÉE 1 vidéo externe.
Appuyer 2 fois pour sélectionner le
mode ENTRÉE 2 vidéo externe.
Appuyer 3 fois pour revenir au mode TV
initial.
ENTRER (ENTER)
Parfois utilisée lorsquun convertisseur
nécessite lintroduction dune commande
enter après la sélection de canaux à
laide du pavé numérique de commande
à distance.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(8)Sélectionne le canal supérieur suivant.
(9)Sélectionne le canal inférieur précedént.
Déplace le curseur
sur l’écran du
MENU.
SOURDINE (MUTE)
Appuyer Mise en sourdine du son.
Appuyer de nouveau Rétablissement
du son.
CLOSED CAPTION apparaît lorsque le
son est mis en sourdine.
COMMANDE DU LECTEUR DE DVD/
MAGNÉTOSCOPE
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors
tension.
PAVE NUMERIQUE DE COMMANDE A
DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu
sur le pavé numérique.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
PREFERENCES PERSONNELLES
Grâce aux touches de préférence
personnelle, vous pouvez programmer
vos programmes préférés à laide des 4
catégories:
A, B, C et D. Ces touches vous permettent
daccéder rapidement à ces canaux.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
() Pour diminuer le volume du son.
Pour changer ou sélectionner les
réglages du téléviseur en mode menu.
RÉGLAGE (MENU)
Appuyer Accès au MENU PRINCIPAL.
Appuyer de nouveau Sortie du MENU
PRINCIPAL.
SÉLECTEUR DE MODE DE
CÂBLOVISION/DVD-TÉLÉVISION/
MAGNÉTOSCOPE (CATV/DVD-TV/VCR)
En position télévision/magnétoscope
(TV/VCR), permet de mettre le téléviseur et
le magnétoscope sous/hors tension et de
sélectionner ses canaux (touche de canaux en
ordre croissant/décroissant et daccès direct).
En position câblovision/DVD (CATV/DVD),
permet de mettre un convertisseur de téléviseur
par câble et un lecteur de DVD sous/hors
tension et de sélectionner ses canaux.
Remarque:
Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans lobscurité lorsque la télécommande a été placée
sous une ampoule fluorescente ou toute autre source lumineuse.
Le matériau phosphorescent nest absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.
Le degré dillumination variera en fonction de lintensité de la source d’éclairage.
Le degré dillumination diminuera avec le temps, en fonction de la température.
Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des touches
phosphorescentes.
L Emplacement des touches (FRANÇAIS)
Panneau Avant
Référence rapide sur les commandes
Fonctions de base de la télécommande
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOL)
(+) Pour augmenter le volume du son.
() Pour diminuer le volume du son.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CH) MENU
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précédent.
Appuyez simultanément sur ces deux
touches pour accéder à l’écran MENU
PRINCIPAL.
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre
hors tension.
ZONE DE DETECTION DU
CAPTEUR
RÉGLAGE (MENU)
Appuyer Accès au MENU
PRINCIPAL.
Appuyer de nouveau Sortie
du MENU PRINCIPAL.
PRISES DENTRÉE
VIDÉO/ AUDIO IN2
07-09 25R-S100.p65e 19/1/01, 4:39 PM9
10
FR NCA I S
ENGL I SH
ESPAÑOL
LANGUAGSELECT E
A
SE ECT : CH8 / 9
VO
L
SE :TL+/
FR NCA I S
ENGL I SH
ESPAÑOL
LANGUAGSELECT E
A
SE ECT : CH8 / 9
VO
L
SE :TL+/
OR CAB LE .
TSART SETUP?ZE
ANTENNCONNECT A
YE : VOL+
VOL
S
NO :
AU
18
TO RGGAMM I NORP
WA I TPLE EAS
VOL
TSOP:
2
CH
CH
VOL
VOL
+
VOL
+
1 2 3
4 5 6
7 8 9
0
100
FLASHBACK
ENTER
PERSONAL PREFERENCE
POWER
TV
DVD
VCR
MENU MUTE
CATV TV
DVD VCR
DISPLAY
INPUT
VOL
CH
CH
VOL
+
ABCD
(Remote Control)
POWER
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/()
(On the Set)
(EZ SETUP mode)
L When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press the
power button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the
POWER
button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to select ENGLISH, SPANISH
(ESPAÑOL) or FRENCH (FRANÇAIS).
3 Press
VOL (+)
or
()
to access EZ SETUP mode.
4 Press
VOL (+)
.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL ()
and it will be canceled.
If you want to SETUP again, please refer to page
27 on SETUP.
To cancel EZ SETUP
Press
VOL ()
.
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
If EZ SETUP does not memorize all the channels in your region, please refer to page 28 for more
information on manually memorizing the channels using CHANNEL SETTING.
It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency
is incorrect or the frequency jamming is occuring around the area. Please refer to pages 28 ~ 30 for
more information on manually memorizing the channels using CHANNEL SETTING.
EZ SETUP during First Power On
(SELECT LANGUAGE mode)
POWER
10-11 25R-S100.p65e 19/1/01, 4:39 PM10
42
Specifications
MODEL 25R-S100
Receiving System NTSC
Reception Channels
AIR VHF 2-13 ch
UHF 14-69 ch
CATV 1-125 ch
Channel Tuning 181-channel Reception PLL tuning system
Antenna Input Impedance VHF/UHF 75 ohm Unbalance
Screen Size 25˝ Diagonally Measured
Terminals Audio/Video input x 2 (Front x 1, Rear x 1)
Sound Output 1.5 W (RMS) x 2
Power Source AC 120 V, 60 Hz
Power Consumption 100 W
Dimensions 24
45
/
64
˝ (W) x 22
11
/
64
˝ (H) x 20
9
/
32
˝ (D)
[626.5 mm (W) x 563.0 mm (H) x 514.5 mm (D)]
Weight (approx.) 61.7 lbs. (28.0 kg)
Design and specifications are subject to change without notice.
40-44[Bk] 25R-S100.p65e 19/1/01, 4:40 PM42
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp 25R-S100 Operation Manual bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp 25R-S100 Operation Manual in de taal/talen: Engels als bijlage per email.

De handleiding is 1,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info