13185

Sharp 25R-S100 Operation Manual Handleiding

1
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
1
CONTENTS
PAGE
• Important Information .........................................2 ~ 3
• Important Safeguards .........................................3 ~ 4
• Supplied Accessories ............................................... 5
• Before Operating Your Television ............................. 5
• Antenna Connections .........................................5 ~ 6
• Quick Reference Control Operation .................. 7 ~ 9
• EZ SETUP during First Power On .......................... 10
• Demo Mode ............................................................ 11
• Accessing the MAIN MENU screen without
Remote Control ...................................................... 11
• Language ............................................................... 12
• Sleep Timer ............................................................12
• Video Adjust ........................................................... 13
COLOR TELEVISION
This operating manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 8, 41.
FRENCH is on page 9.
PAGE
• Audio Select ........................................................... 14
MTS (MULTICHANNEL TV SOUND) .................. 14
• Closed Caption ....................................................... 15
• Parent Control ................................................ 16 ~ 26
V-CHIP ........................................................ 16 ~ 23
VIEW TIMER .............................................. 24 ~ 26
• Energy Save ........................................................... 26
• Set Up ............................................................ 27 ~ 32
EZ Setup ............................................................. 27
Channel Setting .......................................... 28 ~ 30
Blue Screen ........................................................ 30
Personal Reference ............................................ 31
Universal Plus Function ...................................... 32
• Using the Video and Audio Input Jacks .......... 33 ~ 34
• Operation of Remote Control ......................... 35 ~ 39
• Before Calling for Service ............................... 40 ~ 41
• Calling for Service .................................................. 40
• Specifications ......................................................... 42
• Limited Warranty .................................................... 43
L OPERATION MANUAL L
A
s an
E
NERGY
S
TAR
®
P
artner, SHARP has determined that this product meets the
E
NERGY
S
TAR
®
guidelines for energy efficiency.
E
NERGY
S
TAR
®
is a
U.S.
registered
trademark.
MODEL
25R-S100
7290 GJ
01-02 25R-S100.p65e 19/1/01, 4:38 PM1
2
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Important Information
There are two important reasons for prompt warranty registration of your new SHARP television set,
using the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WHAT IS ENERGY STAR
®
TVs and VCRs use energy both when they are on and when they are off. Americans spend more than $1
billion a year on energy consumed by TVs and VCRs when they are not in use. The new ENERGY
STAR
®
models will reduce that energy “leakage” by up to 75 percent. Ultimately, this will mean more than
$500 million a year in energy savings for consumers.
The energy savings will help reduce the burning of fossil fuels and the related carbon dioxide pollution
that contributes to global warming. If every American family replaced their TVs and VCRs with ENERGY
STAR
®
models, it would reduce carbon dioxide emissions by five million tons every year — equivalent to
eliminating the pollution from more than one million cars.
By using ENERGY STAR
®
products, you will save money on your electric bills and use less energy. That
makes good economic sense and it’s good for our environment.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.”
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
01-02 25R-S100.p65e 19/1/01, 4:38 PM2
3
CAUTION: Please read all of these instructions before you operate your television and save these
instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable
operation of the television equipment and to protect it from overheating, these openings must not be blocked
or covered. This television equipment should not be placed in a built-in insulation such as a bookcase
unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and
defeat this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
13. Follow all warnings and instructions marked on the television equipment.
Important Information (Continued)
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this
equipment.
Important Safeguards
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries
Alliance:www.eiae.org
03-04 25R-S100.p65e 19/1/01, 4:38 PM3
4
15. For added protection for this television equipment during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This
will prevent damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance — this indicates a need
for service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
NEC - NATIONAL ELECTRICAL CODE
ANTENNA LEAD-IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CLAMPS
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ELECTRIC
SERVICE
EQUIPMENT
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
Important Safeguards (Continued)
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of
the National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
03-04 25R-S100.p65e 19/1/01, 4:38 PM4
5
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
CATV
PAU SE
TV
DVD VCR
FLASHBACK
DISPLAY
INPUT
TV • CATV• VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
Note:
Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to the interference of the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
Before Operating Your Television
Battery
Cover
Pull up
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control/Part Number
RRMCG1626CESA
Antennas
• The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
Antenna Connections
05-06 25R-S100.p65e 19/1/01, 4:39 PM5
6
OUT
A
IN
B
REAR OF TV
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(Not supplied)
or
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR OF TV
A. Combination VHF/UHF Antennas
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
Note:
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
B. Separate VHF/UHF Antenna
Cable TV converter/
descrambler
(not supplied)
Two-set
signal
splitter
(not
supplied)
Cable TV Line
RF switch (not supplied)
OUT
IN
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75 ohm system is generally a round cable
with F-type connector that can easily be
attached to a terminal without tools (not
supplied).
2. A 300 ohm system is a flat “twin-lead” cable
that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR (not
supplied).
Antenna Connections (Continued)
05-06 25R-S100.p65e 19/1/01, 4:39 PM6
7
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Infrared Transmitter Window
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press → Switch to external video
INPUT 1 mode.
Press 2 times → Switch to external video
INPUT 2 mode.
Press 3 times → Switch back to the
original TV mode.
See page 34.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 35)
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 28 ~ 30 for channel
presetting.
• Moves the “
” mark of the MENU
screens.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote
control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
POWER
Press → On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 31.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE SELECT
SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
See page 35.
Basic Remote Control Functions
Quick Reference Control Operation
L Location of Controls (ENGLISH)
Front Panel
Quick Reference Control Operation
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• Press both at the same time to
access the MAIN MENU screen.
POWER
Press → On.
Press again → Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
VIDEO/AUDIO IN2 TERMINALS
07-09 25R-S100.p65e 22/1/01, 1:45 PM7
8
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier canal
empleando las teclas.
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
PREFERENCIAS PERSONALES
Con los botones Personal Preference
puede programar sus programas favoritos
utilizando las cuatro categorías A, B, C y D.
Puede acceder a los canales rápidamente
utilizando estos botones.
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
• En modo de MENU cambia
o selecciona el ajuste del televisor.
PREPARACION (MENU)
Pulsando → Accede al MENU PRINCIPAL.
Pulsando nuevamente → Sale del
MENU PRINCIPAL.
CONMUTADOR SELECTOR DE
TELEVISOR/TV POR CABLE (CATV/
DVD-TV/VCR)
En la posición TV/VCR, el mando envia
los comandos de alimentación y selección
de canales (botones de canal superior/
inferior y de acceso aleatorio) a un
televisor y a un control de VCR.
En la posición CATV/DVD, envia los
comandos de alimentación y selección de
canales a un convertidor de TV por cable
y a un control de DVD.
Note:
• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del control
remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.
• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.
• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.
• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
Ventanilla del transmisor de infrarrojos
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente → Elimina la
visualización.
• En el modo de “Closed Caption” se
muestra el canal de recepción por un
corto tiempo.
ENTRADA (INPUT)
Pulsando → Cambia al modo de entrada
1 del vídeo externo.
Pulsando 2 veces → Cambia al modo de
entrada 2 del vídeo externo.
Pulsando 3 veces → Vuelve al modo TV
original.
INTRODUCIR (ENTER)
Se utiliza en algunos casos en los cuales
una Caja de Inversor de Cable requiere
una orden “enter” después de seleccionar
los canales, al usar el teclado a distancia.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal superior.
(9) Selecciona el siguiente canal inferior.
• En el modo de MENU, mueve la marca
“
”.
SILENCIAMIENTO (MUTE)
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el
sonido.
• CLOSED CAPTION aparece automática-
mente cuando el sonido es silenciado.
Siempre y cuando la transmisión tenga
esta señal.
CONTROLES DEL DVD/VIDEO
L Ubicación de los controles (ESPAÑOL)
Panel Delantero
Referencia rápida de los controles de operación
Funciones Basicas Del Control Remoto
AUMENTO/DISMINUCION
DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
CANAL SUPERIOR/INFERIOR (CH) – MENU
(8) Selecciona el siguiente canal superior.
(9) Selecciona el siguiente canal inferior.
• Pulse ambos al mismo tiempo para acceder a
la pantalla de MENU PRINCIPAL.
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
ZONA DEL SENSOR DEL
MANDO A DISTANCIA
MENU (MENU)
Pulsando → Accede al MENU
PRINCIPAL.
Pulsando nuevamente → Sale del MENU
PRINCIPAL.
TERMINALES DE ENTRADA
VIDEO/AUDIO IN2
07-09 25R-S100.p65e 19/1/01, 4:39 PM8
9
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Fenêtre d’émission du signal infrarouge
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau pour faire disparaître
le canal.
• Pour afficher temporairement le canal
reçu en mode Sous-titres.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode
ENTRÉE 1 vidéo externe.
Appuyer 2 fois pour sélectionner le
mode ENTRÉE 2 vidéo externe.
Appuyer 3 fois pour revenir au mode TV
initial.
ENTRER (ENTER)
Parfois utilisée lorsqu’un convertisseur
nécessite l’introduction d’une commande
“enter” après la sélection de canaux à
l’aide du pavé numérique de commande
à distance.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(8)Sélectionne le canal supérieur suivant.
(9)Sélectionne le canal inférieur précedént.
• Déplace le curseur “
” sur l’écran du
MENU.
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son.
Appuyer de nouveau → Rétablissement
du son.
• CLOSED CAPTION apparaît lorsque le
son est mis en sourdine.
COMMANDE DU LECTEUR DE DVD/
MAGNÉTOSCOPE
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors
tension.
PAVE NUMERIQUE DE COMMANDE A
DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu
sur le pavé numérique.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
PREFERENCES PERSONNELLES
Grâce aux touches de préférence
personnelle, vous pouvez programmer
vos programmes préférés à l’aide des 4
catégories:
A, B, C et D. Ces touches vous permettent
d’accéder rapidement à ces canaux.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
• Pour changer ou sélectionner les
réglages du téléviseur en mode menu.
RÉGLAGE (MENU)
Appuyer → Accès au MENU PRINCIPAL.
Appuyer de nouveau → Sortie du MENU
PRINCIPAL.
SÉLECTEUR DE MODE DE
CÂBLOVISION/DVD-TÉLÉVISION/
MAGNÉTOSCOPE (CATV/DVD-TV/VCR)
En position télévision/magnétoscope
(TV/VCR), permet de mettre le téléviseur et
le magnétoscope sous/hors tension et de
sélectionner ses canaux (touche de canaux en
ordre croissant/décroissant et d’accès direct).
En position câblovision/DVD (CATV/DVD),
permet de mettre un convertisseur de téléviseur
par câble et un lecteur de DVD sous/hors
tension et de sélectionner ses canaux.
Remarque:
• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a été placée
sous une ampoule fluorescente ou toute autre source lumineuse.
• Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.
• Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.
• Le degré d’illumination diminuera avec le temps, en fonction de la température.
• Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
• Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des touches
phosphorescentes.
L Emplacement des touches (FRANÇAIS)
Panneau Avant
Référence rapide sur les commandes
Fonctions de base de la télécommande
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOL)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CH) – MENU
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précédent.
• Appuyez simultanément sur ces deux
touches pour accéder à l’écran MENU
PRINCIPAL.
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre
hors tension.
ZONE DE DETECTION DU
CAPTEUR
RÉGLAGE (MENU)
Appuyer → Accès au MENU
PRINCIPAL.
Appuyer de nouveau → Sortie
du MENU PRINCIPAL.
PRISES D’ENTRÉE
VIDÉO/ AUDIO IN2
07-09 25R-S100.p65e 19/1/01, 4:39 PM9
10
FR NCA I S
ENGL I SH
ESPAÑOL
LANGUAGSELECT E
A
SE ECT : CH8 / 9
VO
L
SE :TL+–/
FR NCA I S
ENGL I SH
ESPAÑOL
LANGUAGSELECT E
A
SE ECT : CH8 / 9
VO
L
SE :TL+–/
OR CAB LE .
TSART SETUP?ZE
ANTENNCONNECT A
YE : VOL+
VOL –
S
NO :
AU
18
TO RGGAMM I NORP
WA I TPLE EAS
VOL –
TSOP:
2
CH
CH
VOL
—
VOL
+
VOL
+
1 2 3
4 5 6
7 8 9
0
100
FLASHBACK
ENTER
PERSONAL PREFERENCE
POWER
TV
DVD
VCR
MENU MUTE
CATV TV
DVD VCR
DISPLAY
INPUT
VOL
—
CH
CH
VOL
+
ABCD
(Remote Control)
POWER
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
(On the Set)
(EZ SETUP mode)
L When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press the
power button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)
(3) Plug in the AC POWER cord to the wall outlet.
1 Press the
POWER
button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3 Press
VOL (+)
or
(–)
to access EZ SETUP mode.
4 Press
VOL (+)
.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL (–)
and it will be canceled.
If you want to SETUP again, please refer to page
27 on SETUP.
To cancel EZ SETUP
Press
VOL (–)
.
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 28 for more
information on manually memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency
is incorrect or the frequency jamming is occuring around the area. Please refer to pages 28 ~ 30 for
more information on manually memorizing the channels using CHANNEL SETTING.
EZ SETUP during First Power On
(SELECT LANGUAGE mode)
POWER
10-11 25R-S100.p65e 19/1/01, 4:39 PM10
11
Demo Mode
• To quickly learn more about the TV set, press and hold for more than
three seconds both
MENU
or
CH UP (
88
88
8
)
and
DOWN (
99
99
9
)
on the TV
set. The TV set will go into DEMO mode and briefly explain the various
features.
• To cancel DEMO mode, again press both
MENU
or
CH UP (
88
88
8
)
and
DOWN (
99
99
9
)
on the TV set.
Example:
DEMO mode display
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most settings
via the MAIN MENU screen when you press both
MENU
or
CH UP
(
88
88
8
)
and
DOWN (
99
99
9
)
on the TV set.
• Some features of your TV set will not be accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Service
Center for a replacement.
(On the Set)
CHANNEL
UP (
8
)/
DOWN (
9
)
buttons
C
F
o
r
m
o
e
m
SHARP
SHARP
P
M
r
i
o
n
d
d
uc
t
s
s
MENU
button
or
(On the Set)
CHANNEL
UP (
8
)/
DOWN(
9
)
buttons
MENU
button
or
10-11 25R-S100.p65e 19/1/01, 4:39 PM11
12
SL EP TIMERE
VIDEO ADJUST
ELECTAUD IO S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EP TIMERE
VIDEO ADJUST
ELECTAUD IO S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EP TIMERE
VIDEO ADJUST
ELECTAUD IO S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
FR NCA I S
ENGL I SH
ESPAÑOL
IDIOMA
A
BL E SCREENU
PE SONAL PREF .R
UN VERSAL PLUSI
LANGUAGE
INGCH SET T
CH
CH
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to “SET UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode, then press
CH UP
(
8
)
or
DOWN
(
9
)
to move the “ ” mark to “LANGUAGE”.
4 Press
VOL (+)
or
(–)
to access LANGUAGE change mode.
5 Press
CH UP
(
8
) or
DOWN
(
9
) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
6 Press
MENU
to exit.
Sleep Timer
L You can set the number of minutes for your TV to automatically turn off.
1 Press MENU to access MAIN MENU screen.
2 Press VOL (+) or (–) to access TIMER SET mode.
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
Note:
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during
step 3.
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remote’s Display key is pressed.
Language
(MAIN MENU screen)
(TIMER SET mode)
(LANGUAGE change mode)
(MAIN MENU screen)
→
→
(SET UP mode)
→
12-14 25R-S100.p65e 19/1/01, 4:39 PM12
13
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
Selected VOL UP (+) button VOL DOWN (–) button
item
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
FAVORITE To choose a RED, BLUE or STANDARD COLOR TONE.
COLOR
RESET To return all adjustments to factory preset levels.
PERSONAL PREFERENCE
MENU MUTE
CATV TV
DVD VCR
VOL
—
CH
CH
VOL
+
ABCD
VOL
—
VOL
+
CH
CH
CH
CH
VOL
—
VOL
+
Description of Adjustment Items
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to “VIDEO
ADJUST”.
3 Press
VOL (+)
or
(–)
to access PICTURE adjust mode.
4 Press
CH UP
(
8
) or
DOWN
(
9
)
to select the desired mode.
(Refer to the diagram below.)
5 Press
VOL (+)
or
(–)
to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
MENU
to exit.
(PICTURE adjust mode)
→
VOL UP (+)
increase contrast
VOL DOWN (–)
decrease contrast
(MAIN MENU screen)
Video Adjust
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
PICTURE
TINT
COLOR
SHARP
FAVORITE COLOR
RESET
: CH DOWN (9)
: CH UP (8)
BRIGHT
ICTUR
E
– +
P
50
ICTUR
E
– +
P
50
12-14 25R-S100.p65e 19/1/01, 4:39 PM13
14
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SELECT
: SAPMTS
AUD I O
MO O
S
SA
E
P
N
IR
12
REO
ON A
T IRON A
→
STEREO SAP MONO
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
Audio Select
L MTS (MULTICHANNEL TV SOUND)
This circuit allows reception of stereo or bilingual TV sound.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to “AUDIO
SELECT”.
3 Press
VOL (+)
or
(–)
to access AUDIO SELECT mode.
4 Press
VOL (+)
or
(–)
to select “STEREO”, “SAP” or “MONO”.
5 Press
MENU
to exit.
Ex:
Actual screen indicating ON AIR when receiving STEREO broadcasts.
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to fixed monaural mode.
Note:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is
determined by the video source.
(MAIN MENU screen)
(AUDIO SELECT mode)
(Channel call on screen)
12-14 25R-S100.p65e 19/1/01, 4:39 PM14
15
CAPT I ONCLOSED
MODE : C AP
DATA :CH 1
TION
CAPT I ONCLOSED
MODE : C AP
DATA :CH 1
TION
CAPT I ONCLOSED
MODE : C AP
DATA :CH 1
TION
CAPTION
TEXT
OFF
CH 1
CH 2
→
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
PERSONAL PREFERENCE
MENU MUTE
CATV TV
DVD VCR
VOL
—
CH
CH
VOL
+
ABCD
VOL
—
VOL
+
CH
CH
CH
CH
VOL
—
VOL
+
Closed Caption
L HOW TO SET CLOSED CAPTION
• Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please look
for the “ ” symbol to ensure that captions will be shown.
• Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1 Press MENU to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to “CLOSED
CAPTION”.
3 Press
VOL (+)
or
(–)
to access CLOSED CAPTION setting mode.
4 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to either
“MODE” or “DATA”.
5 Press
VOL (+)
or
(–)
to change the CLOSED CAPTION setting.
6 Press
MENU
to exit.
Note:
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]
mode automatically. Pressing MUTE again will return the set to its previous condition.
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your set.
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
(MAIN MENU screen)
(CLOSED CAPTION setting mode)
MODE :
DATA :
15-17 25R-S100.p65e 19/1/01, 4:39 PM15
16
1. User setting 2. Block table
PG
age
base
not to
block
not to
block
Select
block
auto-
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
– – – – –
– – – – –
BLOCK
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
1. User setting 2. Block table
PG
age
base
not to
block
not to
block
not to
block
Select
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
– – – – –
– – – – –
– – – – –
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
Parent Control (V-CHIP Operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
• Restriction of TV programs includes two characters that contain information about the program’s MPAA
rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted
by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13 PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate
for children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.Note:
• MPAA RATING (Example)
Example 1.
“PG-13” in the age based RATING is blocked,
this will automatically block the high ratings “R”,
“NC-17”, “X” also.
Note:
• MPAA RATING is only age based ratings.
[2] TV PARENTAL GUIDELINES
y
content base
x
AGE D L S V FV
(Sexually (Adult (Sexual (Violence) (Fantasy
Suggestive Language) Situation) Violence)
Dialog)
TV-Y (All children)
V –––––
TV-Y7 (Direct to Older Children)
V ––––V
TV-G (General Audience)
V –––––
TV-PG (Parental Guidance
VV V V V –
Suggested)
TV-14 (Parents Strongly
VV V V V –
Cautioned)
TV-MA (Mature Audience Only)
V – VVV –
V : Content Rating can be set.
–
: Content Rating can not be set (not normally broadcast by TV station).
Example 2.
“R” in the age based RATING is blocked, this will
automatically block the high rating “NC-17”, “X” also.
age
base
RATING
E
age
base
D
15-17 25R-S100.p65e 19/1/01, 4:39 PM16
17
Parent Control (V-CHIP Operation Continued)
• TV-PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Go through all select ratings and select unblocked for “AGE”.
This will automatically unblock everything.
Example 1.2 : Age Based setting
For “TV-G” select “BLOCK” for “AGE”. This will automatically block the
higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are automatically
blocked as well for “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.
Example 2.1 : Content Based setting
For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content
ratings (“D”, “L”, “S”, “V”, “FV”) by leaving “AGE” unblocked for “TV-
PG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in
content base.
Example 2.2 : Content Based setting
Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This will
automatically block the higher ratings “TV-14-V” and “TV-MA-V” (“TV-
14” and “TV-MA” for Violence content only).
Please note that with these settings blocking does NOT occur. If a
program is rated only “TV-MA”; it must be rated “TV-MA-V” to be blocked.
Example 3 : Reset an Age Based setting
For “TV-14” and select again “BLOCK” for “AGE”.
This will again automatically block the content ratings “D”, “L”, “S”, “V”,
“FV” for “TV-MA” as well as “TV-14”.
Please note that the lower age rating “TV-PG” did not change from its
previous settings.
Note:
• Content ratings can be modified but only in the combinations indicated by an V in the table on page
16.
• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age
rating’s content setting to “BLOCK” regardless of their previous settings.
• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”
regardless of their previous settings.
• Any rating’s “AGE” set to unblocked must have its content settings individually set.
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data
can be downloaded when they become available. (See page 20.)
TV–Y
TV–Y7
TV–G
TV–PG
TV– 14
TV–MA
MENU : RET URN
G
AE
–
–
–
–
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
–
V:
:
BLOCK
VIE
W
FV
TV–Y
TV–Y7
TV–G
TV–PG
TV– 14
TV–MA
MENU : RET URN
G
AE
–
–
–
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
–
V
VVVV
VVVV
VVV
V
V
V
V
:
:
BLOCK
VIE
W
FV
–
TV–Y
TV–Y7
TV–G
TV–PG
TV– 14
TV–MA
MENU : RET URN
G
AE
–
–
–
–
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
–
V:
:
BLOCK
VIE
W
FV
TV–Y
TV–Y7
TV–G
TV–PG
TV– 14
TV–MA
MENU : RET URN
G
AE
–
–
–
–
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
–
V:
:
BLOCK
VIE
W
FV
V
V
V
TV–Y
TV–Y7
TV–G
TV–PG
TV– 14
TV–MA
MENU : RET URN
G
AE
–
–
–
–
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
–
V:
:
BLOCK
VIE
W
FV
V
V
V
V
V
V
VV
V
15-17 25R-S100.p65e 19/1/01, 4:39 PM17
18
(PARENT CONTROL mode)
(V-CHIP select mode)
(MAIN MENU screen)
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
IP BLOCK
V – C
H
TIMER
VIE
W
PARENT CONTROL
MP AA
TV GUIDELINES
AD : OFFDO
W
NLO
STATUS :OFF
G
PG
PG– 13
R
NC–17
X
B:LOCK
B:LOCK
B:LOCK
B:LOCK
B:LOCK
–: ––––
MENU : RET URN
1 2 3
4 5 6
7 8 9
0
100
MENU MUTE
FLASHBACK
A B C D
ENTER
PERSONAL PREFERENCE
VOL
—
VOL
+
CH
CH
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
VOL
—
VOL
+
VOL
—
VOL
+
CH
CH
Parent Control (V-CHIP Operation Continued)
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
REMOTE
KEYPAD
MENU
L HOW TO SET V-CHIP
[1] MPAA RATING
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” mark to “PARENT
CONTROL”.
3 Press
VOL (+)
or
(–)
to access PARENT CONTROL mode, then
“PARENT CONTROL V-CHIP BLOCK” is displayed.
4 Press
VOL (+)
or
(–)
to access V-CHIP select mode, then press
VOL (+)
or
(–)
to select “MPAA RATING”.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” mark to "PG",
then press
VOL (+)
or
(–)
to select BLOCK. If you set “PG” to
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.
6 Repeat pressing
MENU
to return V-CHIP select mode exit.
Note:
Ex.
• If you set “G” to BLOCK , all RATING are automatically blocked.
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.
→
→
18-19 25R-S100.p65e 19/1/01, 4:39 PM18
19
MP AA
TV GUIDELINES
AD : OFFDO
W
NLO
STATUS :OFF
TV–Y
TV–Y7
TV–G
TV–PG
TV– 14
TV–MA
MENU : RET URN
G
AE
–
–
–
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
–
–
V
VVVV
V
VVV
VVV
V
V
V
V
VV
:
:
BLOCK
VIE
W
FV
–
A
TV–Y7
D
GE
L
S
V
V
F
:
:
:
:
:
BLOCK
BLOCK
:
–––––
–––––
–––––
–––––
MENU : RET URN
TV–Y
TV–Y7
TV–G
TV–PG
TV– 14
TV–MA
MENU : RET URN
G
AE
–
–
–
D
–
–
–
L
–
–
–
S
–
–
–
V
––
–
–
–
–
V
VVVV
V
VVV
VVV
V
V
V
V
:
:
BLOCK
VIE
W
FV
VOL
—
VOL
+
CH
CH
→
VOL
—
VOL
+
CH
CH
→
VOL
—
VOL
+
CH
CH
Parent Control (V-CHIP Operation Continued)
[2] TV GUIDELINES
1 Repeat steps 1 to 3 of [1] MPAA RATING.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” mark to “TV
GUIDELINES”.
3 Press
VOL (+)
or
(–)
to access TV GUIDELINES mode.
4 To change CONTENT SETTING, press
CH UP (
8
)
or
DOWN
(
9
)
to move the “ ” to the desired rating and then press
VOL
(+)
or
(–)
to select.
5 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” to the desired
content and then press
VOL (+)
or
(–)
to select either “BLOCK” or
unblock (“– – – –”).
6 Press
MENU
to return to TV GUIDELINES mode.
7 Repeat steps 4 to 5 until all ratings and their contents are set.
8 When done, press
MENU
to exit.
(TV GUIDELINES mode)
(CONTENT RATING mode)
18-19 25R-S100.p65e 19/1/01, 4:39 PM19
20
Parent Control (V-CHIP Operation Continued)Parent Control (V-CHIP Operation Continued)
MP AA
TV GUIDELINES
AD : OFF
OFF
DO
W
NLO
STATUS :
MP AA
TV GUIDELINES
AD : ON
OFF
DO
W
NLO
STATUS :
NO
W
DOLADINGN
W
O
V – CH TAADPI
WA I TPLE EAS
(DOWNLOAD screen)
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
REMOTE
KEYPAD
MENU
[3] ADDITIONAL MODE (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1 Repeat steps 1 to 3 of [1] MPAA RATING.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” mark to
“DOWNLOAD”.
3 Press
VOL (+)
or
(–)
to “DOWNLOAD : ON”.
4 Repeat pressing
MENU
to return exit.
•
DOWNLOAD V-CHIP DATA
1 If you watch the program with “New Rating System Data”,
DOWNLOAD screen will be displayed.
2 DOWNLOAD screen will disappear, if DOWNLOAD is finished.
Note:
• DOWNLOAD would not be started, if you don’t watch the program with “New Rating System
Data”.
1 2 3
4 5 6
7 8 9
0
100
MENU MUTE
FLASHBACK
A B C D
ENTER
PERSONAL PREFERENCE
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
20-23 25R-S100.p65e 19/1/01, 4:39 PM20
21
MPAA
TV GU I
Cdn .
DO
W
NL
nEglis Rhatinsg
Cdn .
rFenchRatinsg
EDLINES
OAD : ON
STATU
S:ON
(After download the rating data)
C
C8+
G
PG
14+
18+
INDIV
B:LOCK
–: ––––
B:LOCK
–: ––––
B:LOCK
–: ––––
IDUAL BL
MENU : RET URN
OCK
(ENGLISH INDIVIDUAL BLOCK mode)
G
8+
13+
16+
18+
INDIV
–: ––––
B:LOCK
–: ––––
B:LOCK
–: ––––
IDUAL BL
MENU : RET URN
OCK
(FRENCH INDIVIDUAL BLOCK mode)
→
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
→
→
Parent Control (V-CHIP Operation Continued)
•
ADDITIONAL MODE (Example)
1 Repeat steps 1 to 2 of [3] ADDITIONAL MODE.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” mark to “Cdn.
English Ratings”, then press
VOL (+)
or
(–)
.
3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing
CH UP (
8
)
or
DOWN (
9
)
and
VOL (+)
or
(–)
.
4 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing
CH UP (
8
)
or
DOWN (
9
)
and
VOL (+)
or
(–)
if
you select “Cdn. French Ratings” in step 2.
Note:
• In additional mode
Including two types (English mode, French mode), altogether you are able to download 4 kinds
of mode.
20-23 25R-S100.p65e 19/1/01, 4:39 PM21
22
VOL
—
VOL
+
CH
CH
→
MP AA
TV GUIDELINES
AD : OFFDO
W
NLO
STATUS :ON
– – –
–
NIPUT SECRET No.
2 3 4
1
NIPUT SECRET No.
L ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Repeat steps 1 to 3 of [1] MPAA RATING.
2 Press
CH UP (
8
)
or
DOWN (
9
)
to move the “ ” mark to
“STATUS”, then press
VOL (+)
or
(–)
to activate ON the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
3 Press
MENU
, then “INPUT SECRET No.” will be displayed.
4 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
.
5 Press
MENU
and SECRET No. is registered.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data as same as you configured.
Note:
•“V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2 Press
MENU
, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
, then
V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
Note:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
Parent Control (V-CHIP Operation Continued)
AC I VATEDT
V – CH HIP AS BEEN
23
TV– Y7
FV
– – –
–
NIPUT SECRET No.
∗
∗
∗
∗
NIPUT SECRET No.
20-23 25R-S100.p65e 19/1/01, 4:39 PM22
23
– – –
–
NIPUT SECRET No.
∗
∗
∗
∗
NIPUT SECRET No.
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
2 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
L If you intend to change or forget your Secret No., clear the original Secret No. and set
up a new one.
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To
cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has
been activated], then “INPUT SECRET No.” will be displayed.
2 Press and hold both
VOL (+)
and
CH DOWN (
9
)
on the TV
set simultaneously until the message “INPUT SECRET No.”
disappears.
3 Press
MENU
two times to exit.
Parent Control (V-CHIP Operation Continued)
(On the Set)
VOL (+)/CHANNEL
DOWN (
99
99
9
) buttons
20-23 25R-S100.p65e 19/1/01, 4:39 PM23
24
VEWT
––H
IIMER
––M
OFF
STATU
VEWINGITIME
TIME
––H ––M
S:OFF
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
IP
BLO
CK
V – C
H
TIMER
VIE
W
PARENT CONTROL
VI
W
TIMER
ST TAUS
E
VI
W
ITIME
:OFF
EGN
––––H
––––H
OFF T IME
M
M
→
→
VOL
—
VOL
+
CH
CH
→
VOL
—
VOL
+
CH
CH
→
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
VEWT
2H
IIMER
00M
OFF
STATU
VEWINGITIME
TIME
––H ––M
S:OFF
VEWT
2H
IIMER
00M
OFF
STATU
VEWINGITIME
TIME
5H 00M
S:ON
– – –
–
NI PUT SECRET No .
CH
CH
Parent Control (VIEW TIMER)
L VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10
hours) in 30 minutes intervals.
OFF TIME (Restricts TV watching after the VIEWING TIME reaches
zero.)
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
in 30 minutes intervals.
STATUS (ON/OFF setting of VIEW TIMER)
L How to set VIEW TIMER.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to “PARENT
CONTROL”.
3 Press
VOL (+)
or
(–)
to access PARENT CONTROL mode.
4 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to “VIEW
TIMER”.
5 Press
VOL (+)
or
(–)
to access “VIEW TIMER”.
6 Press
CH UP
(
8
) or
DOWN
(
9
)
to select “VIEWING TIME” and
“OFF TIME”. For each selection, press the
VOL (+)
or
(–)
to set
the time duration.
7 Press
CH UP
(
8
) or
DOWN
(
9
)
to select “STATUS”. Press the
VOL (+)
or
(–)
to turn ON the “VIEWING TIMER”. (If STATUS is
OFF, VIEW TIMER is not operated)
8 Press
MENU
. “INPUT SECRET No.” will be displayed.
(MAIN MENU screen)
(PARENT CONTROL mode)
24-26 25R-S100.p65e 19/1/01, 4:39 PM24
25
VEWT
2H
IIMER
00M
OFF
STATU
VEWINGITIME
TIME
5H 00M
S:ON
1 2 3
4 5 6
7 8 9
0
100
ENTER
1 2 3
4 5 6
7 8 9
0
100
ENTER
1 2 3
4 5 6
7 8 9
0
100
ENTER
– – –
–
NI PUT SECRET No .
VOL
—
VOL
+
VOL
—
VOL
+
2 3 4
1
NI PUT SECRET No .
– – –
–
NI PUT SECRET No .
I PUT ESN CRET No .
****
RRECT
INC
O
S
ECRET No . I S
TMEO
–
I VER
I PUT ESN CRET
No .
–––
TMEOI VER
I PUT ESN CRET
No .
****
Parent Control (VIEW TIMER Continued)
→
9 Enter the 4-digit SECRET No. using the
REMOTE KEYPAD
.
10
Press
MENU
, and SECRET No. is registered.
Example
• To restrict anybody from watching the TV for 5 hours, after watching the
TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish. For
example, they could watch 1 hour of TV, turn TV off for 30 minutes, then
turn TV on and watch the remaining 1 hour on the VIEWING TIMER.
L To change the VIEW TIMER settings. (SECRET No. is registered)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step 3.
Press
VOL (+)
or
(–)
, and “INPUT SECRET No.” will
be displayed.
2 Enter the 4-digit SECRET No. using the
REMOTE
KEYPAD
, and the VIEW TIMER access screen will
be displayed. Repeat step 5 ~ 6.
Note:
• When you choose the correct SECRET No., the VIEW TIMER access
screen is displayed. If the wrong SECRET No. is chosen, “SECRET No.
IS INCORRECT” is displayed. Input the SECRET No. again in this case.
L To cancel the VIEW TIMER (While the TV set is OFF but the VIEW
TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear. If you
do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit SECRET No. using the
REMOTE
KEYPAD
. When you choose the correct SECRET No.,
the VIEW TIMER is canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” is
displayed. Input the SECRET No. again in this case.
L To cancel the VIEW TIMER setting or change the SECRET No. (When
you forget the SECRET No.)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step 3.
Press
VOL (+)
or
(–)
, and “INPUT SECRET No.” will
be displayed.
24-26 25R-S100.p65e 19/1/01, 4:39 PM25
26
REMAIN
30M
VIEWING TIME
0H
REMAIN
05M
VIEWING TIME
0H
REMAIN
0
VIEWING TIME
SET UP
V I DEO ADJUST
SELECT
CAPT I ONCLOSED
AUD I O
PARENT CONTROL
ENERGY SAVE
SL EP T IMERE
Energy Save
L This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off.
The reduction in brightness will be less noticeable under low
room lighting conditions.
1 Press MENU to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
)
to move the “ ” mark to
“ENERGY SAVE”.
3 Press
VOL (+)
or
(–)
to access ENERGY SAVE select mode.
4 Press
VOL (+)
or
(–)
to select “ON”.
5 Press
MENU
to exit.
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
(MAIN MENU screen)
(ENERGY SAVE select mode)
→
VOL
—
VOL
+
VOL
—
VOL
+
CH
CH
(On the Set)
VOL (+)/CHANNEL
DOWN (
99
99
9
) buttons
PERSONAL PREFERENCE
MENU MUTE
CATV TV
DVD VCR
VOL
—
CH
CH
VOL
+
ABCD
:ON
EN REGYSAVE
:OFF
EN REGYSAVE
Parent Control (VIEW TIMER Continued)
2 Press and hold both
VOL
(
+
) and
CH DOWN
(
9
) on the TV set
simultaneously until the VIEW TIMER access screen is displayed.
Now you can cancel the VIEW TIMER settings or can change the
SECRET No. while “INPUT SECRET No.” is displayed.
L Notice of Remaining VIEWING TIME
• For every 30 minute interval, the “remaining time” will be displayed
for 4 seconds. For the last 5 minutes, the “remaining time” will be
displayed every minute.
•“0 REMAIN” will be displayed for 10 seconds just before the VIEWING
TIME is completed.
24-26 25R-S100.p65e 19/1/01, 4:39 PM26
27
2
BL E SCREENU
LANGUAGE
INGCH SETT
PE SONAL PREF .R
UN VERSAL PLUSI
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
AU
18
TO RGGAMM I NORP
WA I TPLE EAS
VOL –
TSOP:
OR CAB LE .
TSART SETUP?ZE
ANTENNCONNECT A
YE : VOL+
VOL –
S
NO :
1 2 3
4 5 6
7 8 9
0
100
MENU MUTE
FLASHBACK
A B C D
ENTER
PERSONAL PREFERENCE
VOL
—
VOL
+
CH
CH
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
VOL
—
VOL
+
CH
CH
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
VOL
+
L EZ SETUP
By operating the channel presetting functions, you can preset
your TV to the desired channels for viewing.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET
UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode, then press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “CH SETTING”.
4 Press
VOL (+)
or
(–)
to access CH SETTING mode.
5 Press
VOL (+)
or
(–)
to access EZ SETUP mode.
6 Press
VOL (+)
.
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press
VOL (–)
. Search will be
canceled.
To cancel EZ SETUP
Press
VOL (–)
.
7 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Set Up
(MAIN MENU screen)
→
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
REMOTE
KEYPAD
(EZ SETUP mode)
(CH SETTING mode)
(SET UP mode)
→
27-28 25R-S100.p65e 19/1/01, 4:39 PM27
28
→
→
→
LA
BL E NSCREE
NGUAGE
U
CH SETT I NG
PE SONAL PREF .R
UN VERSAL PLUSI
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
AI
ABLE STD
R
AI /CABLER
C
ABLE HRCC
ABLE I RCC
AIR
CABLE STD
CABLE HRC CABLE IRC
H SEARCH
EZ SETUP
AI /CABLER
C
HMEMORYC
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
VOL
—
VOL
+
CH
CH
CH
CH
VOL
—
VOL
+
CH
CH
CH
CH
VOL
—
VOL
+
Set Up (Continued)
L CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET
UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode.
4 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “CH
SETTING”.
5 Press
VOL (+)
or
(–)
to access CH SETTING mode.
6 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “AIR/
CABLE”, then press
VOL (+)
or
(–)
to access AIR/CABLE mode.
7 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to the
desired mode.
8 Press
MENU
to exit.
Note:
• Receivable channels of your TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC mode only)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
(MAIN MENU screen)
(CH SETTING mode)
(SET UP mode)
(AIR/CABLE mode)
27-28 25R-S100.p65e 19/1/01, 4:39 PM28
29
(CH SETTING mode)
(CH SETTING mode)
(CH SEARCH mode)
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
2
AR +T:
TO –P:
AIR
CH SEARCH
ST
S
1
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
L Saving broadcast TV channels into memory.
1.1 Press
MENU
to access MAIN MENU
screen, then press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET UP”.
1.2 Press
VOL (+)
or
(–)
to access SET UP
mode, then press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “CH
SETTING”.
1.3 Press
VOL (+)
or
(–)
to access CH
SETTING screen.
1.4 Press
CH UP
(
8
) or
DOWN
(
9
) to move
the “
” mark to “CH SEARCH”, then press
VOL (+)
or
(–)
to access CH SEARCH
screen.
START
2.1 Press
VOL (+)
. The tuner will search
through all available channels in your area
and add them into the TV’s memory.
STOP
2.2 Press
VOL (–)
. CH SEARCH will stop at
the current channel and will not add any
higher channels.
2.3 Press
MENU
to exit.
Note:
• If you press
VOL (+)
again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels will
be lost.
L Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press
MENU
to access MAIN MENU
screen, then press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET UP”.
1.2 Press
VOL (+)
or
(–)
to access SET UP
mode, then press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “CH
SETTING”.
1.3 Press
VOL (+)
or
(–)
to access CH
SETTING mode, then press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “CH
MEMORY”.
2.1 Press
VOL (+)
or
(–)
to access CH
MEMORY.
2.2 Use
CH UP
(
8
) or
DOWN
(
9
) or
REMOTE
KEYPAD
to select each desired channel
to add or erase.
2.3 Press
VOL (+)
to add a channel to the TV’s
memory or press
VOL (–)
to erase a
channel from the TV’s memory.
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
2
AR +T:
TO –P:
AIR
CH SEARCH
ST
S
1
AI /CABLER
EZ
SETUP
CH SEARCH
CH MEMORY
→
(START)
(STOP)
or
→
→
→
→
→
CH
CH
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
VOL
—
VOL
+
CH
CH
VOL
+
VOL
—
CH
CH
CH
CH
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
Set Up (Continued)
29-30 25R-S100.p65e 19/1/01, 4:39 PM29
30
L BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET
UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode.
4 Press
VOL (+)
or
(–)
to access BLUE SCREEN select mode.
5 Press
VOL (+)
or
(–)
to select “ON”.
6 Press
MENU
to exit.
Note:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
2.4 Press
MENU
to exit.
VOL (+)
To add channel 12 to
the TV memory
VOL (–)
To erase channel 12 from
the TV memory
(CH MEMORY
memorized channel)
(CH MEMORY
unmemorized channel)
D+:
AIR
C
HMEMORY
ADTO
2
1
E –:
AIR
CH MEMORY
ESTO AR
21
(MAIN MENU screen)
(SET UP mode)
(BLUE SCREEN select mode)
LANG GEUA
BL E NSCREEU
CH SETT I NG
PE SONAL PREF .R
UN VERSAL PLUSI
:OFF
BL EUSCREEN
:ON
BL EUSCREEN
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
→
PERSONAL PREFERENCE
MENU MUTE
CATV TV
DVD VCR
VOL
—
CH
CH
VOL
+
ABCD
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
CH
CH
VOL
—
VOL
+
VOL
—
VOL
+
VOL
—
VOL
+
Set Up (Continued)
29-30 25R-S100.p65e 19/1/01, 4:39 PM30
31
BL E SCREENU
LA
CH SETT I NG
GUAGEN
UN VERSAL PLUSI
PE S RNOALP F.ER
.PE SRONAL PREF
––– ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
ABCD
––– ––– ––– –––
––– ––– –––
PE SRONALPREF.
––– ––– ––– –––
––– ––– ––– –––
––– ––– ––– –––
ABCD
–––
.
PE SRONALPREF
––– ––– –––
––– ––– –––
125 ––– ––– –––
ABCD
––– ––– –––
–––
–––
–––
.
PE SRONALPREF
40 55 ––– –––
25 123 30 –––
125 85 38 –––
ABCD
4 ––– ––– –––
1 2 3
4 5 6
7 8 9
0
100
ENTER
→
CH
CH
VOL
—
VOL
+
→
CH
CH
VOL
—
VOL
+
1 2 3
4 5 6
7 8 9
0
100
MENU MUTE
FLASHBACK
A B C D
ENTER
PERSONAL PREFERENCE
VOL
—
VOL
+
CH
CH
SET UP
V I DEO ADJUST
SELECT
CAPT I ONCLOSED
AUD I O
PARENT CONTROL
ENERGY SAVE
SL EP T IMERE
125 25 40 4
Set Up (Continued)
L PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in advance,
you can select your favorite channels easily.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET
UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode, then press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “PERSONAL
PREFERENCE”.
4 Press
VOL (+)
or
(–)
to select PERSONAL PREFERENCE select
mode in which you can program 4 favorite channels, in 4 different
categories. (total of 16 channels)
5 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to the
desired position.
6 Press
REMOTE KEYPAD
on the Remote to input the CHANNEL
Number into the memory.
Example:
125 — Press “100” followed by “2” and then “5”.
7 Repeat steps 4 to 6 to input the next CHANNEL Number.
8 Press
MENU
to exit.
To select the PERSONAL PREFERENCE channel.
If the channels are memorized as shown to the right,
press the Remote’s “A” button to select the Channels below.
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
(MAIN MENU screen)
REMOTE
KEYPAD
PERSONAL
PREFERENCE
(SETUP mode)
(PERSONAL PREFERENCE select mode)
31-32 25R-S100.p65e 19/1/01, 4:40 PM31
32
BL E SCREENU
LA
CH SETT I NG
GUAGEN
UN VERSAL PLUSI
PE S RNOALP F.ER
BL E SCREENU
LA
CH SETT I NG
GUAGEN
UN VERSAL PLUSI
PE S RNOALP F.ER
UN VI ERSAL PLUS
VCR
OFF
:
:
DVD
OFF
:
:
UN VI ERSAL PLUS
VCR
CH3
:
:
DVD
OFF
:
:
→
CH
CH
VOL
—
VOL
+
CH
CH
VOL
—
VOL
+
CH
CH
PERSONAL PREFERENCE
MENU MUTE
CATV TV
DVD VCR
VOL
—
CH
CH
VOL
+
ABCD
SL EP T IMERE
VIDEO ADJUST
ELECTAUD I O S
SET UP
CAPT I ONCLOSED
CONTROLPARENT
ENERGY SAVE
VOL
—
VOL
+
→
Set Up (Continued)
L UNIVERSAL PLUS FUNCTION
VCR or DVD input mode will be selected automatically by pressing
VCR or DVD PLAY button on UNIVERSAL REMOTE CONTROL.
1 Press
MENU
to access MAIN MENU screen.
2 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to “SET
UP”.
3 Press
VOL (+)
or
(–)
to access SET UP mode.
4 Press
CH UP
(
8
) or
DOWN
(
9
) to move the “ ” mark to
“UNIVERSAL PLUS”.
5 Press
VOL (+)
or
(–)
to access UNIVERSAL PLUS to select VCR
or DVD mode.
6 Press
CH UP
(
8
) or
DOWN
(
9
)
to select the VCR or DVD, and
press
VOL (+)
or
(–)
to select “CH3, CH4”, “INPUT 1”, “INPUT 2”
or “OFF”.
CH3 CH4 INPUT1 INPUT2 OFF
Set model to the input in which your
VCR or DVD is connected to. If done
through RF, select either channel 3 or
4 to match the setting of the VCR or
DVD.
7 Press
MENU
to exit.
(SET UP mode)
(MAIN MENU screen)
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
(UNIVERSAL PLUS select mode)
31-32 25R-S100.p65e 19/1/01, 4:40 PM32
33
(Rear connection
terminals of TV)
DVD
CAMCORDER
TV GAME
VCR
To VIDEO OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
(Front connection
terminals of TV)
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
To VIDEO
OUTPUT
FWDREV
Using the Video and Audio Input Jacks
VIDEO EQUIPMENT
L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
33-34 25R-S100.p65e 19/1/01, 4:40 PM33
34
AIR
or
CABLE
INPUT 1
(IN-1)
Rear
INPUT 2
(IN-2)
Front
L To watch video material playback.
• Press the Remote’s
INPUT
to select VIDEO INPUT mode to which the video equipment you want to
playback is connected.
• The external VIDEO INPUT mode will change as follows each time the
INPUT
is pressed.
• INPUT mode can be selected by pressing either the
CH UP
(
8
) on the TV remote control when the
TV is set to the highest channel stored in memory, or by pressing the
CH DOWN
(
9
) when it is set to
the lowest channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
Using the Video and Audio Input Jacks (Continued)
33-34 25R-S100.p65e 19/1/01, 4:40 PM34
35
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
DVD/VCR POWER
Press to turn the VCR or DVD
on and off.
PLAY
Press to playback a tape or disc.
REWIND
Press to rewind a tape or disc.
For some VCRs or DVDs you
may need to press STOP first,
then REWIND.
PAUSE
Press to temporary stop the
tape or disc during playback
or recording (VCR only).
Press again to release Pause.
STOP
Press to stop the tape or disc.
REMOTE KEYPAD
Use to enter two-digit code
numbers when identifying your
VCR.
ENTER
FF
Press to rapidly advance the
tape or disc. For some VCRs or
DVDs, you may need to press
STOP first, then FF.
VCR CHANNEL
UP ( )/ DOWN ( )
Press to scan up or down through
channels on the VCR.
RECORD
Press to begin recording.
(VCR only)
DVD SKIP
Press to jump forward to the
beginning of the next chapter/track,
or backward to the beginning of the
current chapter/track, and
automatically start to play that
chapter/track.
Operation of Remote Control
L Universal Remote Control
With the purchase of your television set you
also have received the latest innovation in
remote control technology. With its easy-to-
use push button keyboard, your Remote can
control your television set and most infrared
remote controlled VCRs, cable TV converters
and DVDs as well.
Note:
• Depending on the model year produced, brand
and type of VCR cable TV converter and DVD,
some models may not be compatible with the
remote control.
• Some brands of Cable TV converter Box may
not enable channel selection until the ENTER
is pressed.
Example:
When you select channel 24,
(1) Press REMOTE KEYPAD “2”.
(2) Press REMOTE KEYPAD “4”.
(3) Press ENTER.
For detailed information on the use of the
Cable TV converter Box refer to their operating
manuals.
L Using Your Remote With Your TV
After installing the batteries, set the
CATV/
DVD-TV/VCR
on the remote to the TV position.
(If you can change the channel of the TV by
pressing
CH UP
(
8
) or
DOWN
(
9
) on the
Remote Control, it is the TV position.)
L “Identifying” Remote VCRs, cable TV
conveters and DVDs
Your Remote Control has been set at the
factory to operate your TV and many remote
control VCRs, cable TV converters and DVDs.
However, in some cases an easy one-time set-
up step may be necessary before the Remote
will operate accessory VCRs, cable TV
converters and DVDs.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR, cable TV converters and DVDs.
• Once “identified”, the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due
to a battery failure.
L USING YOUR REMOTE CONTROL WITH A
VCR AND DVD
Once you make certain the Remote Control
has “identified” your remote controlled VCR
or DVD, the Remote Control is ready to
operate your unit. The various VCR or DVD
function buttons on the Remote Control will
not operate your VCR or DVD if those features
are not already found on your unit.
• For detailed information on the use of the VCR
or DVD, refer to the operation manual of the
VCR or DVD.
35-39 25R-S100.p65e 19/1/01, 4:40 PM35
36
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Operation of Remote Control (Continued)
L HOW TO IDENTIFY A VCR
The remote control may already be set to
operate your VCR. Try this initial check to see
if going on to the following “identify” section is
necessary.
(1) Slide
CATV/DVD-TV/VCR
switch to VCR.
(2) Point remote towards VCR and press
DVD/
VCR
POWER
.
(3) Does the remote turn the VCR ON and OFF?
• If yes, the remote is ready to operate the VCR
and no further steps are needed.
• If no, continue to the “identify” section.
L To Identify Your VCR – Direct Entry Method.
Use the following steps and list to quickly find
the remote control code for your accessory
VCR.
• First look up your VCR’s remote control code
number before going through the direct code
entry steps control.
• If this procedure does not identify your
accessory VCR, use the Search method of
identification (described in the next section).
(1) Slide
CATV/DVD-TV/VCR
switch to VCR.
(2) Press and hold down
DISPLAY
and
CH DOWN
(
9
)
on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing
DISPLAY
and
CH DOWN (
9
)
, enter your VCR’s two-
digit remote control code number using
REMOTE KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your VCR.
Some brands have more than one remote
code listed, due to changes in the remote
codes from early to later model years, or due
to format differences (VHS/BETA). In such
cases, you may have to try more than one code
to find the code your VCR accepts.
Note:
Depending on the model, year produced,
brand, and type of VCR, some models may
not be compatible with the remote control.
L To Identify Your VCR – Search Method.
(1) Slide
CATV/DVD-TV/VCR
switch on the
remote to VCR.
(2) Press POWER on the VCR to ON.
(3) Stand at least six feet away from the front of
the VCR.
Point the remote towards the VCR.
Hold down
DISPLAY
and
CH UP (
8
)
at the
same time. KEEP HOLDING THE BUTTONS
DOWN.
(4) Watch the Channel Number indicator on the
VCR, Channel numbers will scan up when the
VCR has been identified.
Release
DISPLAY
and
CH UP (
8
)
as soon
as the channel numbers start to scan up.
The VCR’s remote control code number has
been identified, and the remote is ready to
operate the VCR.
DVD/VCR
POWER
DISPLAY
CHANNEL
UP (8)/
DOWN (9)
CATV/DVD-TV/VCR
REMOTE
KEYPAD
TV
POWER
35-39 25R-S100.p65e 19/1/01, 4:40 PM36
37
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Operation of Remote Control (Continued)
TIPS ON IDENTIFYING YOUR VCR:
If your VCR model does not have the CHANNEL
UP function on its remote control, it cannot be
identified using the SEARCH method of identifying.
For such models, please try the DIRECT ENTRY
method of identifying.
Be Patient: a minute or two can seem a lot longer
when you’re waiting for something to happen, but
the code should be identified within 2 minutes.
Remember, it is only a one-time set-up.
Be careful not to let the VCR scan more than five
channels when the indicator starts to move up. If
you continue holding down the
DISPLAY
and
CH
UP (
8
)
after five channel scans, the proper remote
code can be passed up, and the two minutes identify
cycle will have to be repeated.
If a channel change does not occur on the VCR
within two minutes, read the identifying instructions
again and repeat the steps. Should a channel
change still not occur the remote will not operate
with the desired VCR.
Akai
Audio Dynamics
Broksonic
Canon
Capehart
Craig
Curtis Mathis
Daewoo
DBX
Dynatech
Emerson
Fisher
Funai
GE
Goldstar
Hitachi
Instant Replay
JC Penney
JVC
Kenwood
Lloyds
Magnavox
Magnin
Marantz
Memorex
Minolta
Mitsubishi
Montgomery Ward
Multitech
NEC
Panasonic
Pentax
Philco
Philips
Quasar
RCA
Realistic
Samsung
Sanyo
Scott
Sears
Sharp
Shintom
Sony
Sound Design
Sylvania
Symphonic
Tatung
Teac
Teknika
Thomas
TMK
Toshiba
Video Concepts
Yamaha
Zenith
25, 26, 37
15, 22, 30
32
04
34
10, 31
04
34
15, 22, 30
29
21, 32, 35
09, 10, 11
28, 29
04
24
06
04
04, 06, 24, 30
15, 41, 42
14, 15
29
04, 05, 08
31
30
04, 10, 24, 29
06
17, 18, 39, 40
02, 43
29
15, 22, 30
04, 44
05, 06
04, 05
04, 05, 08
04
06, 07, 33
01, 02, 10, 24
23, 31
14, 10
20
06, 11, 24
01, 02, 03
36
12, 13, 38
29
04, 05, 08
29
15
15, 29
27, 29
29
21
19, 20
30
15, 29, 30
16
VCR BRAND
REMOTE CONTROL
CODE NUMBER
DISPLAY
REMOTE
KEYPAD
CHANNEL
UP (8)/
DOWN (9)
CATV/DVD-
TV/VCR
TV
POWER
35-39 25R-S100.p65e 19/1/01, 4:40 PM37
38
1 2 3
4 5 6
7 8 9
0
100
POWER
TV
DVD
VCR
MENU MUTE
PAUSE
FLASHBACK
DISPLAY
INPUT
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
CATV TV
DVD VCR
Operation of Remote Control (Continued)
DVD/VCR
POWER
INPUT
CHANNEL
UP (8)/
DOWN (9)
CATV/DVD-
TV/VCR
REMOTE
KEYPAD
Denon
JVC
Magnavox
Marantz
Mitsubishi
Panasonic
Philips
Pioneer
Proscan
RCA
Samsung
Sharp
Sony
Toshiba
Yamaha
Zenith
02
09
04
04
06
02
04
08
03
03
07
01
05
04
02
04
DVD BRAND
REMOTE CONTROL
CODE NUMBER
L HOW TO IDENTIFY A DVD
The remote control may already be set to
operate your DVD. Try this initial check to see
if going on to the following “identify” section is
necessary.
(1) Slide
CATV/DVD-TV/VCR
switch to DVD.
(2) Point remote towards DVD and press
DVD/
VCR
POWER
.
(3) Does the remote turn the DVD ON and OFF?
• If yes, the remote is ready to operate the DVD
and no further steps are needed.
• If no, continue to the “identify” section.
L To Identify Your DVD – Direct Entry Method.
Use the following steps and list to quickly find
the remote control code for your accessory
DVD.
• First look up your DVD’s remote control code
number before going through the direct code
entry steps control.
(1) Slide
CATV/DVD-TV/VCR
switch to DVD.
(2) Press and hold down
INPUT
and
CH DOWN
(
9
)
on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing
INPUT
and
CH DOWN (
9
)
, enter your DVDs two-digit
remote control code number using
REMOTE
KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your DVD.
Note:
Depending on the model, year produced,
brand, and type of DVD, some models may
not be compatible with the remote control.
TV
POWER
DISPLAY
35-39 25R-S100.p65e 19/1/01, 4:40 PM38
39
Operation of Remote Control (Continued)
L HOW TO IDENTIFY A CABLE CONVERTER
L To Identify Your Cable Converter –Direct
Entry Method.
Use the following steps and list to quickly find
the remote control code for your cable TV
converter.
• First look up your converter’s remote code
number before going through the direct code
entry steps below.
• If this procedure does not identify your
converter, use the Search method of
identification.
(1) Slide
CATV /DVD-TV/VCR
switch to CATV.
(2) Press and hold down
DISPLAY
and
CH DOWN
(
9
)
on your remote control.
Then release both buttons.
(3) Within ten seconds after releasing
DISPLAY
and
CH DOWN (
9
)
, enter your converter’s
two-digit code number using
REMOTE
KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your converter.
• Some brands have more than one remote
code listed due to changes in the remote codes
from early to later model years. In such cases,
you may have to try more than one code to
find the code your converter accepts.
Note:
Depending on the model, year produced,
brand, and type of CATV converter, some
models may not be compatible with the remote
control.
L To Identify Your Cable Converter – Search
Method.
(1) Slide
CATV /DVD-TV/VCR
switch to CATV.
(2) Press the POWER button on the cable
converter to ON.
(3) Stand at least six feet away from the converter.
Point the remote towards the converter.
Hold down the
DISPLAY
and
CH UP (
8
)
at
the same time. KEEP HOLDING THE
BUTTONS DOWN.
(4) Watch the Channel Number indicator on the
converter.
Channel numbers will scan up when the
converter has been identified.
Release the
DISPLAY
and
CH UP (
8
)
as soon
as the channel numbers start to scan up.
The converter’s remote control code number
has been identified, and the remote is ready
to operate the converter.
TIPS ON IDENTIFYING YOUR CABLE
CONVERTER:
Be Patient: a minute or two can seem a lot
longer when you’re waiting for something to
happen, but the code should be identified
within 2 minutes. Remember, it is only a one-
time set-up.
Be careful not to let the CATV converter scan
more than five channels when the indicator
starts to move up. If you continue holding down
the
DISPLAY
and
CH UP (
8
)
after five channel
scans, the proper remote code can be passed
up, and the two minutes identify cycle will have
to be repeated.
If a channel change does not occur on the
cable converter within two minutes, read the
identifying instructions again and repeat the
steps. Should a channel change still not occur,
the remote will not operate with the desired
converter.
Note:
Some satellite receivers can be operated by
the REMOTE CONTROL. If you have a
Satellite Receiver, you can use the above
method to search for available channels.
Anvision
Cable Star
Eagle
General Instrument
Jerrold
Magnavox
Oak Sigma
Panasonic
Philips
Pioneer
Randtek
RCA
Scientific Atlanta
Sony
Viewstar
Zenith
07, 08
07, 08
08
04, 05, 15, 23, 24, 25,
30, 36
04, 05, 15, 23, 24, 25
30, 36
07, 08, 19, 25, 28, 29,
32, 33, 40, 41
18
27, 39
07, 08, 19, 26, 28, 29,
32, 33, 40, 41
18, 20
07, 08
27, 43
03, 22, 42
44
07, 08, 19, 26, 28, 29
32, 33, 40, 41
14
CATV CONVERTER
BRAND
REMOTE CONTROL
CODE NUMBER
35-39 25R-S100.p65e 19/1/01, 4:40 PM39
40
XXXXX X X X X XX XX XX XX
X XXXXXX X XXXXXXX XX
X X XX X X X X X XX XX XX XX
XXXXXXXXXX X X X X X XX
XXXXXXX X XXXXXX X XX
XXXX X X X X X XX X XXXX X
X X XX X X X X X XX XX XX XX
XXXXXXX X X XX XX XX X X
X X XXXXX X X XX XX XX X X
XXXX X X X X X XX XXXXXX
XXX X X X X X X XX XX XX X X
X X XX X X X X X XX XX XX X X
XXX XXXX X XXX XXXXX X X
Before Calling for Service
Check these items and see if you can correct trouble with a slight adjustment of the controls.
(Dark and Blank Picture)
Note:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
Closed Caption mode to “OFF”.
QUICK SERVICE
CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then
possible station trouble.
Is TV plugged in? Power at outlet?
Is TV’s POWER button on?
Is antenna connected to terminal on
the back of the set?
If outside antenna is being used,
check for broken wire.
Check for local interference or
external electrical noise.
Turn off with POWER button and
then turn it on after about a minute.
Adjust COLOR control.
Adjust PICTURE control.
Check external Video/Audio
products: look for loose/broken
connection leads. (Refer to page
33)
Check batteries of Remote Control.
Change Closed Caption mode to
“OFF” / Energy Save mode to
“OFF”.
Unplug the TV and plug it in again
after two minutes or longer.
PROBLEM
No Playback of VCR and Disk
Player
No Picture or Sound from
External Video/Audio Products
Remote Control Doesn
’t Work
Bars on Screen
Picture Distorted
Picture Rolls Vertically
No Color
Poor Reception on Some
Channels
Weak Picture
Lines or Streaks in Picture
Ghosts in Picture
Picture Blurred
Sound OK, Picture Poor
Picture OK, Sound Poor
No Picture or Sound
Dark and Blank Picture
External Electrical Noise
Interfering with TV
’s Operation
Color on Part of the Screen
Appears Distored
For location of the nearest Sharp Authorized Service, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
Calling for Service
40-44[Bk] 25R-S100.p65e 19/1/01, 4:40 PM40
41
Antes de llamar al servicio de reparaciones
Verifique estos items para ver si usted mismo puede solucionar el problema.
(Imagen oscura y en blanco)
Nota:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la
pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga
el modo CLOSED CAPTION en OFF.
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está
bien, el problema puede ser de la
emisora.
Está conectado el televisor?
Llega electricidad al tomacorrientes?
Está conectado el interruptor del
televisor?
Está conectado la antena al terminal
del panel posterior del televisor?
Si utiliza una antena exterior,
cerciórese de que el cable no esté
dañado.
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y
vuelva a conectarlo después de
transcurrir un minuto.
Ajuste el control de COLOR.
Ajuste el control de MATIZ.
Verifique los productos externos de
Video/Audio, revise si hay fugas de
conexiones sueltas o rotas.
Compruebe el estado de las pilas del
mando a distancia.
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save).
Desenchufe el televisor y vuelva a
enchufarlo despúes de dos minutos
o más.
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
XXXXXXXXXXXXXXXXX
X XXXXXXXXXXXXXX XX
X X XXXXXXXXXXXXX XX
X X XXXXXXXX X X X X X XX
XXXXXXXXXXXXXX X XX
XXXX X X X X X XXX XXXX X
X X XXXXXXXXXXXXX XX
X X XXXXX XX X X XX X XX X
X X XXXXXXX XXXX XXX X
XXXXXXXXXXXXXXXXX
XXX XXXXXXXXXXXXX X
X X XXXXXXXXXXXXXX X
XXX XXXX XX XXXXXXX X X
PROBLEMA
El vídeo o el reproductor de discos de video no
reproducen imágenes
El equipo de video/audio externo no produce
imágenes ni sonido
El mando a distancia no funciona
Barras en la pantalla
Imagen distorsionada
La imagen se desplaza verticalmente
No hay color
Mala recepción de algunos canales
Imagen débil
Franjas en la imagen
Imagen fantasma
Imagen borrosa
Sonido adecuado, imagen mala
Imagen adecuada, sonido malo
No hay imagen ni sonido
Imagen oscura y en blanco
Interferencia de ruido el
éctrico externo con el
funcionamento del televisor
El color se ve distorsionado en parte de la
pantalla
40-44[Bk] 25R-S100.p65e 19/1/01, 4:40 PM41
42
Specifications
MODEL 25R-S100
Receiving System NTSC
Reception Channels
AIR VHF 2-13 ch
UHF 14-69 ch
CATV 1-125 ch
Channel Tuning 181-channel Reception PLL tuning system
Antenna Input Impedance VHF/UHF 75 ohm Unbalance
Screen Size 25˝ Diagonally Measured
Terminals Audio/Video input x 2 (Front x 1, Rear x 1)
Sound Output 1.5 W (RMS) x 2
Power Source AC 120 V, 60 Hz
Power Consumption 100 W
Dimensions 24
45
/
64
˝ (W) x 22
11
/
64
˝ (H) x 20
9
/
32
˝ (D)
[626.5 mm (W) x 563.0 mm (H) x 514.5 mm (D)]
Weight (approx.) 61.7 lbs. (28.0 kg)
• Design and specifications are subject to change without notice.
40-44[Bk] 25R-S100.p65e 19/1/01, 4:40 PM42
43
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharp-usa.com
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp
brand product (the “Product”), when shipped in its original container, will be free from defective
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser
for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has
been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth
below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties
other than those described herein, or to extend the duration of any warranties beyond the time period
described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall
be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and
for the period of time described herein, shall constitute complete fulfillment of all liabilities and
responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction
of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp
be liable or in any way responsible, for any damages or defects in the Product which were caused by
repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be
liable or in any way responsible for any incidental or consequential economic or property damage.
Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion
may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description: 25R-S100, 25 inch Color Television (Be sure to have
this information available when you need service for
your Product.)
Warranty Period for this Product: One (1) year parts and (90) days labor. The warranty
period continues for an additional one (1) year, for a
total of two (2) years, with respect to the picture
tube(s) in the Product for parts only. Labor and
service are not provided free of charge for this
additional period.
Additional Item(s) Excluded from Non-rechargeable batteries.
Warranty Coverage (if any):
Where to Obtain Service: From a Sharp Authorized Servicer located in the
United States. To find the location of the nearest
Sharp Authorized Servicer, call Sharp toll free at 1-
800-BE-SHARP.
What to Do to Obtain Service: Contact your Sharp Authorized Servicer to obtain
in-home service for this Product. The Servicer will
come to your home and if it is necessary to remove
the Product, the Servicer will reinstall it. Be sure to
have Proof of Purchase available.
40-44[Bk] 25R-S100.p65e 2/3/01, 4:47 PM43
44
Printed in Mexico
TINS-7290GJZZ
1P03-MMP
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
40-44[Bk] 25R-S100.p65e 19/1/01, 4:40 PM44
1 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp 25R-S100 Operation Manual bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp 25R-S100 Operation Manual in de taal/talen: Engels als bijlage per email.

De handleiding is 1,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info