602878
11
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
11
Connecting the appliance
First connect the smaller plug to the socket on the rear right of
the appliance, and then insert the mains plug to a suitable wall
outlet. A signal is heard, and the possible programme options
and 12:00 are shown on the display.
Setting the current time
Connect the appliance to the mains. Keep the HOUR/MIN
button pressed for three seconds, until the minute digits
start ashing. Use the +/- buttons to set the correct minutes.
Press the HOUR/MIN button to set the hours. After a few
seconds, the ashing of the hour/minute digits ceases; the
current time is now set.
The appliance can also be used without rst setting the
current time.
In the case of a power failure, the time remains stored for
around 12 minutes.
Utensil holder
There is a snap-on hook for the utensil holder at the rear right
side of the appliance. Fit the holder (provided separately) from
above, ensuring that it locks into place. The serving spoon or
ladle may also be stored here during operation.
Lid
To open the lid, pull the lid release downwards.
When closing the lid, always ensure that it locks safely into
place.
Cooking insert markings
The cooking insert shows the following markings:
CUP: Water ll amount per measuring cup of rice (see
Cooking programmes - Rice).
MAX: Maximum ll level
L: Fill amount in litres
General operation
Note: To prevent damage to the non-stick coating of the
cooking insert, do not use any sharp or pointed objects.
Use only the spoon or ladle supplied, or otherwise wooden
cooking utensils.
Prepare the food according to the recipe.
Place the cooking insert into the appliance.
Connect the appliance to the mains and, if so desired, set
the current time.
Put the water or food into the cooking insert, observing the
information provided for the individual cooking programmes.
When steam cooking, place the steaming insert into the
cooking insert.
Note: Observe the Min and Max markings inside the
cooking insert.
Close the lid, ensuring that it is safely closed and locked into
place.
Select the desired cooking programme with the MENU
button. With each push of the button, the next programme in
the sequence is selected.
If desired, the starting time for the cooking process can be
delayed (see Delayed timer setting).
If desired, the pre-set programme running time can be
adjusted individually (see Individual programme running
time
). This function is not available in the rice-cooking and
fast-cooking programmes.
Press the START button to start the programme.
The selected cooking programme starts after a lead time of
approx. 60 seconds.
The cooking programme can be interrupted at any time by
pressing the KEEP button.
To cancel data input while programming, press the KEEP
button twice.
The display shows the remaining cooking time (not
applicable for rice-cooking and fast-cooking programmes).
An acoustic signal indicates that the cooking time has
elapsed, and the appliance switches to Keep warm mode.
After the food has been taken out, turn the appliance off and
disconnect it from the mains.
Delayed timer setting (PRESET)
With this programme function, the programme start can be
delayed for up to 24 hours.
After selecting the desired cooking programme, press the
TIMER button.
Use the +/- buttons to enter the required number of hours.
Press the HOUR/MIN button and then use the +/- buttons to
enter the minutes.
Press the TIMER button to con rm your input.
Press the START button to start the programme.
The display shows the current time and PRESET.
While in this delay mode, the time selected can be displayed
by pressing the TIMER button.
Once the pre-programmed delay has elapsed, the cooking
programme starts automatically.
Individual programme running time
With this programme function, the pre-set cooking time can
be changed and adjusted individually.
This function is not available in the rice-cooking and fast-
cooking programmes.
After selecting the cooking programme, TIMING and the
pre-set time appear on the display. Press the
TIME button.
First use the +/- buttons to enter the required number of
hours.
Press the HOUR/MIN button and then use the +/- buttons to
enter the minutes.
To enter the hours/minutes, press the +/- buttons repeatedly,
or keep them pressed.
Now press the START button to begin the programme
sequence.
The following programme running times can be selected:
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Severin MC 2448 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Severin MC 2448 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 2,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info