712440
21
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
5 = BISCUITS, PASTRY
Suitable for preparing biscuits or pastry, when using baking powder instead of yeast.
6 = WHOLEMEAL
Compared with the STANDARD setting, this programme has extended rising and baking
phases, since the dough for bread with a high rye or wholemeal flour content tends to rise
less than dough containing wheat flour.
7 = DOUGH
This programme does not include a baking phase. After the programme has finished, the
dough (e.g. pizza dough) can be removed and then baked in a conventional oven.
8 = BAKING
Suitable for baking dough (e.g. dough previously kneaded using the DOUGH programme).
In this way, the rising phase can be modified according to the type of dough before the
BAKING programme is started.
BEFORE USING FOR THE FIRST TIME
-
Remove the baking-tin.
-
Insert the plug into a suitable wall socket and switch the appliance on.
-
Use the button to select programme 8 (BAKING).
-
Press the button and let the unit heat up for approximately 10 minutes with the lid
open. This will remove the smell typically encountered when first activating the heating
elements; ensure sufficient ventilation. To prevent the baking-tin from overheating, be
sure to remove it before switching the unit on.
-
Afterwards, press the button for at least 2 seconds, remove the plug from the wall
socket and allow the unit to cool down. The baking-tin itself must be thoroughly cleaned
before it is used for the first time.
OPERATION
-
Open the lid and remove the baking-tin.
-
Fit the dough hook into its socket inside the baking-tin.
-
For best results, always put liquids in first, followed by solid ingredients such as flour.
-
Finally, add the yeast. Be sure to avoid any contact between the yeast and salt or liquids
when using the timer.
-
Replace the baking-tin in the unit. Make sure that the tin locks firmly into place. Before
starting the programme, close the lid, insert the plug into a suitable wall socket and
switch the unit on.
-
Use the button to select the desired baking programme. Each time the button is
pressed, the display changes to the next programme in the sequence.
-
Using the button, the desired level of browning can be pre-selected: P - Medium, H
- Dark, L - Light. This function is not available in the DOUGH programme.
-
If you wish to start the programme with a timer delay, the desired total running time can
now be set with the buttons.
-
Otherwise, press the button to start the kneading and/or baking process.
-
During the second kneading phase in the programmes STANDARD, QUICK, WHITE
BREAD and WHOLEMEAL, an acoustic signal indicates that additional ingredients
such as fruits and nuts can be added to the dough. Do not open the lid after this second
kneading phase, but wait until the programme has finished.
21
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Severin BM-3987 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Severin BM-3987 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds, Fins als bijlage per email.

De handleiding is 0,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info