Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Familiarisation
1. On/Off switch
2. Release button
3. Suction aperture
4. Charging plug
5. Dust container
6. Crevice tool holder
7. Adaptor
8. Rating label (Adaptor)
9. Charge indicator
10. Air outlet openings
11. Crevice tool
12. Crevice brush
13. Filter
14. Charging jack
15. Battery compartment cover
16. Rating label (Vacuum cleaner)
17. Wall bracket
Connection to the mains supply
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label of the adaptor.
This product complies with all binding CE
labelling directives.
Important safety instructions
● Do not operate the vacuum cleaner
without a filter.
● Before the appliance is used, the main
body as well as any attachment fitted
should be checked thoroughly for any
defects. Should the appliance, for
instance, have been dropped onto a hard
surface, it must not be used any longer:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
● Never use the appliance to pick up wet or
hot material.
● This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
● Children should be supervised to ensure
that they do not play with the appliance.
● No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
● This appliance is intended for domestic
use only and not for commercial
applications.
● In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
Mounting
The wall bracket is designed for storing the
appliance and serves as a charging unit.
Mount the wall bracket vertically, near a
wall socket, using the screws provided with
the appliance. The two lugs on the bracket
must face upwards.
When mounting the bracket, ensure that the
power cord leads through the opening on
the lower bracket rim, and that it is not
jammed at any point.
The crevice tool can be stored on the left
side of the bracket.
Charging process
Before using the vacuum cleaner for the first
time, the battery must be charged for a
period of approximately 15 hours.
-
Insert the adaptor into a wall socket.
-
Place the vacuum cleaner in the wall
bracket. The charging process begins
automatically and is indicated by the
7
Rechargeable Vacuum
Cleaner
╞
