758575
3
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
- 3 - 04/2021
Copyright © 2021, Fast ČR, a.s.
This appliance may be used by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been
informed about how to use the appliance in asafe manner and understand the potential dangers.
Children must not use this appliance or play with it. Keep this appliance and the power cord out of reach of children.
Before connecting this appliance to apower socket, make sure the rated voltage stated on its rating label corresponds to the voltage in your power socket.
Never use accessories, which have not been supplied with this appliance or which have not been explicitly recommended by the manufacturer for this type
of appliance.
This appliance is designed for household use. Do not use it for commercial purposes, in industrial surroundings, or outdoors, or for purposes other than those
for which it is intended.
Always place the appliance on an even, dry and stable surface. Do not place it on an electric or gas stove, in the vicinity of an open flame or appliances that
are sources of heat.
Do not put your hands into an area marked by this symbol. Otherwise injury could result when the multi-function head is tilted out and is not
properly locked in the top position.
Never use multiple attachments at the same time.
Before putting the appliance into operation, check that it is correctly assembled and that the multi-function head is tilted down in the horizontal position. For
safety reasons, this appliance is equipped with asafety mechanism that prevents the motor from being started when the multi-function head is tilted out.
In the event that the multi-function head tilts out during operation, the appliance will automatically stop running. When the multi-function head is tilted to
the horizontal working position, the appliance will not automatically resume operation. To resume operation, it is necessary to set the speed control knob to
the OFF position and then re-select the desired speed.
Do not touch rotating parts of the appliance and ensure that foreign items such as clothing, hair, etc. are kept away. An injury could occur or the appliance
could be damaged.
In the event that an item, such as aspoon, falls into the bowl during operation, immediately set the speed control knob to the OFF position (stand-by mode),
and disconnect the power cord from the power socket. Wait until the rotating parts come to astop and then remove the item.
If ingredients stick to the attachment or the sides of the bowl, turn the appliance off, disconnect it from the power socket, and wait until the rotating parts
come to astop. Use asilicone spatula to clean the attachment and the inside of the bowl. Then you can restart the appliance.
Make sure that no hair, clothing or other items enter the feed tube of meat grinder while it is running. Do not put anything other than the ingredients that
are to be processed into the feed tube.
Never use your fingers or other items to push ingredients through the meat grinder feed tube. For this purpose there is apusher included as an accessory.
If the grating and slicing attachment is in operation, ensure that hair, clothing and other items are kept away from the feed tube. Do not put anything other
than the ingredients that are to be processed into the feed tube.
Do not use fingers or other utensils to push ingredients through the feed tube of the grating and slicing attachment. For this purpose there is apusher
included as an accessory to this attachment.
The grating and slicing attachment is not intended for processing frozen food, nut shells, coffee beans, hard fruit stones, etc.
Warning:
Incorrect use may lead to injuries.
To prevent injury caused by sharp edges, be especially careful when handling the grinding blade of the meat grinder and the blade assembly of the blender.
Increased attention must also be paid when emptying out the blending jar, when removing the blade assembly from the blending jar, when removing the
grinding blade from the chamber, and when cleaning the appliance.
Do not attempt to grind bones, nut shells or other hard ingredients.
Hot liquids up to atemperature of 55 °C may be processed in the blending jar. Be especially careful when handling hot liquids. Hot steam or splashing hot
foods and liquids may cause scalding. Never start the blender without the lid properly seated in position. When processing hot liquids, do not remove the
inner cap during operation. Do not touch the hot surface. Use the handle to carry the blending jar when it is hot.
The maximum continuous operating time is 10 minutes. Do not exceed the maximum operating time of 5 minutes when in the kneading mode and do not
exceed the maximum operating time of 2 minutes when using the blender. Before starting it again, allow the appliance to cool down for 30 minutes.
Always turn off the appliance, disconnect it from the power socket when not be using it, when leaving it without supervision, and before assembling,
disassembling, cleaning or moving it. Prior to disassembling the appliance and replacing accessories or accessible parts that move during use, wait until all
moving parts come to astop.
Clean it according to the instructions in chapter Cleaning and maintenance.
Never wash the appliance under running water or submerge it in water or another liquid.
Do not turn on the appliance when it is empty. Incorrect use of the appliance may negatively affect its lifetime.
Ensure that the power plug contacts do not come into contact with water or moisture. Do not place heavy items on the power cord. Make sure that the power
cord does not hang over the edge of atable or that it is not touching ahot surface.
Disconnect the power cord from the power socket by pulling on the plug, never pulling on the cord. Otherwise, this could damage the power cord or the
socket.
If the power cord is damaged, have it replaced at aprofessional service centre. It is forbidden to use the appliance if it has adamaged power cord.
To avoid the danger of injury by electrical shock, do not repair the appliance yourself or make any adjustments to it. Have all repairs performed at an authorised
service centre. By tampering with the appliance, you risk voiding your legal rights arising from unsatisfactory performance or quality warranty.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor STM 6377 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor STM 6377 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info