759894

Sencor SSI 3520 Handleiding

6
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
- 6 - 02/2021
Copyright © 2021, Fast ČR, a.s.
Attention:
Do not use the steam function for silk and synthetics so as not to
damage the fabric.
WATER SPRAYING FUNCTION
■ The water spraying function can be used with any ironing method. It serves to
moisten the fabric and effectively helps with ironing heavily crumpled textiles.
■ Make sure that there is asufficient amount of water in the water tank and turn the
iron so that its front side points towards the location that you wish to spray.
■ Press the water spraying button ( ). Water will spray out of the nozzle on the front
side.
Note:
When using the water spraying function for the first time or when you
have not used the iron for along time, it will be necessary to press the
water spraying button several times before the nozzle starts working
correctly.
DRIP-STOP SYSTEM
The iron is equipped with the Drip-Stop system, which automatically stops water
supply when the set temperature is insufficient for generating steam and thereby
prevents potential dripping of hot water out of the steam outlets.
ANTI-CALC SYSTEM
This iron is equipped with apermanent Anti- Calc filter, which limits the formation of
limescale deposits inside the iron. This filter cannot be deactivated. The effectiveness
of the filter depends on the hardness of the water used.
AUTOMATIC SHUT-OFF FUNCTION
■ The iron will shut off automatically when left 8 minutes without movement in the
upright position, or after 30 seconds without movement in the horizontal position
or when tilted over on one of its sides.
Attention:
Despite the iron being equipped with an automatic shut-off
function, for safety reasons, never leave it without supervision
when it is connected to amains power socket.
TURNING OFF
■ When you have finished using the iron, stand it upright. Set the steam release
regulator to position (steam release off). This will deactivate the steam function.
■ Set the temperature control knob to the MIN position.
■ Disconnect the power cord from the power socket and allow the soleplate to
cool down. After the soleplate has cooled down, clean the iron according to the
instructions in chapter Cleaning and maintenance.
TIPS FOR QUALITY IRONING
■ When the drum of the washing machine is overfilled with alarge amount of laundry,
the laundry may become excessively crumpled, making it harder to iron. Try filling
the washing machine with a smaller amount of laundry or set a lower spinning
speed.
■ If you are ironing fabrics from blended materials (e.g. 40 % wool and 60 % synthetic
material), set the temperature according to the material which is ironed at alower
temperature.
■ If you do not know the composition of the fabric, identify the suitable temperature
setting by ironing apiece of the fabric from the underside. Start by setting alow
temperature and gradually increase it until the ideal temperatures is achieved.
■ Never iron over places that have sweat marks or other stains. The high temperature
fixes the stain in place, making it difficult to remove.
■ To avoid silk, wool and synthetic fabrics from being shiny after ironing, iron them
from the underside.
■ Some materials are easier to iron when they are lightly damp.
■ Spray fine fabrics before ironing them or iron them under a lightly dampened
wiping cloth.
CLEANING AND MAINTENANCE
CLEANING AFTER EVERY USE
■ Before cleaning it, turn the iron off according to the instructions described
previously. The iron must be disconnected from the power socket and cooled down.
Open the water tank cap and then empty out the remaining contents of the water
tank over asink. Close the cap again.
■ In the event that the soleplate or the surface of the iron is dirty, wipe with alightly
dampened cloth and then wipe dry.
■ For cleaning, do not use steel wool, solvents or cleaning products with an abrasive
effect, etc. to prevent damaging the surface being cleaned. Do not submerge the
iron in water when cleaning it.
REMOVING LIMESCALE DEPOSITS
■ For the removal of limescale deposits from the inner part of the soleplate, the iron
is equipped with aSelf-Cleaning function. Use this function regularly at least once
every 14 days.
■ Disconnect the iron from the power socket and set the steam release regulator to
position (steam release off).
■ Fill the water tank with clean water up to the maximum water level mark. Connect
the iron to a power socket and set the temperature control knob to the MAX
position. Wait until the heating indicator turns off. Then disconnect the iron from
the power supply again.
■ Hold the iron in ahorizontal position above the sink. Press the Self-Clean button
A14 and hold it down. Steam and hot water will start to be released from the
soleplate. At the same time also limescale deposits from the inner parts of the
soleplate will be removed. Tilt the iron from side to side several times until the water
tank is completely emptied out. After emptying it out, release the button A14. You
may repeat this process once more if necessary.
■ Connect the iron to a power socket and allow it to heat up once more to the
maximum temperature in order to dry out the soleplate. Iron over a piece of
unneeded fabric to remove any water stains that may have formed on the soleplate
during the cleaning process. Unplug the iron from the power socket and allow it
to cool down.
STORAGE
■ After you have finished ironing, pour out any unused water from the water tank
(careful, it may be hot), or allow it to evaporate if necessary and allow the iron to cool
down. Set the steam release regulator to position (steam release off). Wind the
power cord around the stand, making sure that the power cord is not touching the
soleplate, and then stand the iron on the stand A8.
Attention:
Keep the stored iron away from extreme temperatures, direct
sunlight and excessive humidity and do not store it in an overly
dusty environment. Do not place anything on to the stored iron.
TECHNICAL SPECIFICATIONS
Rated voltage range .................................................................................................... 220−240 VAC
Rated frequency........................................................................................................................50/60 Hz
Rated power input ........................................................................................................ 2.600-3.100W
Continuous steam output .................................................................................................... 35 g/min
Steam impulse ........................................................................................................................170 g/min
Water tank capacity ................................................................................................................... 280 ml
Dimensions (length × width × height) ................................... 300 mm × 125 mm × 135 mm
Weight ................................................................................................................................................1.2 kg
Changes to text and technical parameters are reserved.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling, hand
these products over to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for
the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SSI 3520 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SSI 3520 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info