759894

Sencor SSI 3520 Handleiding

5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
- 5 - 02/2021
Copyright © 2021, Fast ČR, a.s.
EN Steam iron
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ Carefully unpack the appliance and take care not to throw away any part of
the packaging before you find all its parts. We recommend saving the original
cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Handle
A2 Steam impulse button
A3 Water spraying button
A4 Steam release regulator
– Steam release off
– Steam release on full
A5 Water tank cap
A6 Water spraying nozzle
A7 Ceramic ironing soleplate
A8 Maximum water level mark
A9 Heating indicator
A10 Swivel power cord end
Limits twisting and tangling of the
power cord.
A11 Stand
A12 Temperature control knob
A13 Transparent easy-to-fill water tank
A14 Self-Clean button for removing
limescale deposits
A15 Regulator setting mark
A16 Water tank filling container (not
shown)
BEFORE FIRST USE
■ Before first use, remove all packaging materials including promotion stickers and
labels from the iron. Wipe the soleplate with alightly dampened cloth before first
use and then wipe dry.
■ Using adry or lightly dampened cloth, also clean the outer parts of the iron and then
wipe it dry. Never submerge the iron in water or any other liquid!
OPERATION
FILLING THE WATER TANK
■ Before filling the water tank, the iron must be disconnected from the power socket
and the steam release regulator must be set to position (steam output off).
■ The iron is intended to be filled with tap water. Limescale deposits may quickly form,
if you live in an area with hard or very hard water. To extend the lifetime of the iron, it
is recommended to mix the tap water with distilled water. The ratio of distilled water
to tap water is as follows:
– 1:1 for medium hard water
– 2:1 for hard water
– 3:1 for very hard water
Note:
Your local water utility will provide information about the water hardness
in your area.
Attention:
Never add water softeners, vinegar, starch, descaling agents,
perfumes or other additives to the water.
■ Fill the included container with water. Flip open the cap of the filling opening and
slightly tilt the iron. Slowly pour the water from the container through the filling
opening into the water tank. Make sure that the water level does not rise above the
maximum water level mark on the water tank. To correctly assess the water level, it
is necessary to stand the iron in the upright position.
■ After filling the water tank, close the filling opening lid and put the iron in the
upright position. In the event that you spilled any water while filling, thoroughly
dry the iron.
SETTING TEMPERATURE ACCORDING TO TEXTILE
■ When setting the temperature, pay attention to the material composition of
the textile. It is recommended to sort the laundry according to the international
symbols shown on the textile, according to the type of textile or according to the
recommendations of the manufacturer on the label. The number of dots inside the
international symbol corresponds to the number of dots on the temperature control
knob.
INTERNATIONAL
SYMBOL FABRIC TYPE
SUITABLE FOR
CONTINUOUS
STEAMING
STEAM
BOOST SPRAYING
Synthetic fabric
(acrylic, acetate,
polyester,
viscose, etc.)
No No Yes
Cotton with
addition of
other types
of fibres, silk,
wool, wool with
addition of
other types of
fibres, etc.
No No Yes
Corduroy,
cotton, denim
and linen
Yes Yes No
Fabric, that should not be ironed
TURNING ON
■ Connect the power cord to apower socket. Turn the temperature control knob to
the required temperature setting. Indicator A9 will be lit, which means that the
iron is heating up. When the iron'sthermostat reaches the correct temperature, the
heating indicator will turn off. The iron is now ready for use.
Note:
The heating indicator will spontaneously turn on and off during use. This
is completely normal.
In the event that the temperature control knob was not set to the MIN
position the after previous use of the iron, and was left at one of the
temperatures, the heating indicator will be lit immediately when the
power cord is plugged into the power socket.
IRONING WITHOUT STEAMING
■ This function enables the use of the iron with or without water in the water tank,
however, the steam release regulator must be set to position (stream output off)
Note:
When used for the first time, the iron may emit smoke, which is non-toxic.
This is normal. After ashort time, the iron will stop emitting smoke.
IRONING WITH STEAM
Attention:
In order to iron with steam, the water tank must be filled with
water.
CONTINUOUS STEAMING FUNCTION
■ If you wish to iron with steam, slide the steam release regulator from position
(steam release off) towards position (steam release on). Select the position based
on the required steam intensity. The more the steam regulator is moved to the right,
the stronger the steam intensity.
■ Wait until the heating indicator turns off.
■ The steam release regulator can be moved at any time while ironing.
■ For all standard ironing, it is recommended to use the middle settings of the steam
release regulator. Only when ironing linen fabrics, strong silk or similar fabrics is it
recommended to set the steam release regulator to maximum.
Note:
The iron continuously emits steam only if you hold it in a horizontal
position. You can stop the release of steam by standing the iron upright.
■ Setting the steam release regulator to position (steam output off), deactivates
the steam function.
STEAM IMPULSE FUNCTION
■ Use this function when ironing with continuous steam is insufficient. Press the
steam impulse button to generate astrong flow of steam, which can straighten out
even very crumpled up textiles.
■ Wait at least 3 seconds before pressing the button again. If the heating indicator
starts flashing, wait until it turns off and only then press the button.
■ The steam impulse function can also be used when ironing hanging textiles (e.g.
curtains, garments hanging on coat hangers, etc.). Use one hand to gently tension
the fabric and vertically move the iron from bottom up. Press the steam impulse
button to achieve vertical bursts of steam. Do not hold the steam impulse button
continuously and do not consecutively use it more than 10 times.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SSI 3520 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SSI 3520 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,37 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info