759464

Sencor SRV 8550 Handleiding

8
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
- 8 - 08/2020
Copyright © 2020, Fast ČR, a.s.
EN Robotic vacuum cleaner
User'smanual
BEFORE FIRST USE
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’s manual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event of
transportation, we recommend that you pack the appliance in the original box from
the manufacturer.
■ Carefully unpack the appliance and take care not to throw away any part of the
packaging before you find all the parts of the appliance.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1 Anti-collision sensors (in the bumper
bar)
A2 Button for starting and stopping the
automatic cleaning mode
A3 Lid
A4 Water tank with mop holder
A5 Camera
A6 Dust container
A7 Power switch
A8 Side sensor (on both sides of the
vacuum cleaner)
A9 Anti-fall sensor, central
A10 Charging contacts
A11 Left side rotary brush
A12 Bottom anti-fall sensor, left
A13 Left motorised rubber wheel
A14 Battery cover
A15 Holes for mop holder
A16 Wiping system cover
A17 Right side rotary brush
A18 Front swivel wheel
A19 Bottom anti-fall sensor, right
A20 Right motorised rubber wheel
A21 Central rotary brush cover
A22 Central rotary brush
B1 Charging station
B2 Charging contacts
B3 Power adapter plug socket
B4 Power adapter
C1 Remote control
C2 Return to the charging station
button
C3 Direction buttons
C4 Button for starting and stopping the
automatic cleaning mode
C5 Small area intensive cleaning mode
C6 Along-the-walls cleaning mode
C7 Voice messages on/off
C8 Increase suction power
C9 Decrease suction power
D1 Latch for releasing the container
from the vacuum cleaner
D2 Rubber cap of the filling hole
D3 Mop holder
D4 Mop fabric
E1 Latch for releasing the dust container
from the vacuum cleaner
E2 Cleaning brush with blade for
cutting through hair, etc.
E3 HEPA filter with holder
Highly effective air-borne particle
filter able to capture even the finest
dust particles.
E4 Top cover
E5 Bottom dust container cover
E6 Bottom cover release button
F1 Rotary brush cover latches
F2 Brushes
F3 Brush bearings
PURPOSE OF USE AND FEATURES OF THE ROBOTIC VACUUM
CLEANER
■ The robotic vacuum cleaner is intended for cleaning various types of hard floors such
as wooden or laminate floating floors, tiles, vinyl, etc. and carpets with a low pile
height. While vacuuming, it effectively combines various routes to optimally clean the
entire floor area.
■ The suction hole effectively removes hair, animal fur, etc. The side rotary brushes
brush dirt out of hard-to-reach places along walls and furniture and out of corners.
The motorised rubber wheels protect sensitive floors against scratching and can travel
over threshold strips up to aheight of 1.5 cm and ride on to a2 cm high carpet.
■ The suspended bumper enables the vacuum cleaner to dampen the approach to an
obstacle and to efficiently clean around it. The infrared sensors in the front bumper
prevent the robotic vacuum cleaner from colliding with obstacles. Safe operation in
rooms with stairs is made possible by the bottom anti-stair-fall sensors.
■ Another advantage of the robotic vacuum cleaner is the mop function, which enables
dry and wet wiping of smooth hard floor surfaces. While wiping, the vacuum cleaner
vacuums small bits of dirt and dust from the floor to prevent the mop fabric from
being excessively soiled during the cleaning cycle. When the vacuum cleaner finishes
cleaning, it will automatically shut off the supply of water and thereby limit it leaking
on to the floor.
■ For easy operating status identification, there is abutton on the cover fitted with an
indicator light, the colour of which indicates various operating states, see chapter
GUIDE TO LIGHT INDICATORS. Apart from the indicator light, the vacuum cleaner also
has voice messages that accompany certain functions or error states of the vacuum
cleaner.
■ Comfortable control is made possible by asmart device application that enables the
vacuum cleaner to be turned on and off, to be set to the automatic cleaning mode, to
select an operating mode, to send the robotic vacuum cleaner to the charging station
or to set scheduled cleaning.
■ The vacuum cleaner navigates within an area by means of aSLAM type navigation
system (simultaneous localisation and mapping) and a GYRO MAPPING function,
which can identify the space geometry of aroom in which it is cleaning, and thereby
the vacuum cleaner is able to better clean the floor. This is a built-in function and
cannot be affected in any way.
PREPARING FOR OPERATION
INSTALLING THE SIDE ROTARY BRUSHES AND THEIR USE
■ The side rotary brushes A11 and A17 are intended for smooth floor surfaces and
ensure effective cleaning in corners, along walls and furniture.
■ If the robotic vacuum cleaner is not supplied with the rotary brushes already installed,
it is necessary to install them. Turn the robotic vacuum cleaner upside down and push
the brushes with force on to the pin.
Attention:
When turning the vacuum cleaner upside down, ensure that it
does not fall out of your hands on to the floor or that you do not
damage its camera A5 when putting it down. We recommend
placing the vacuum cleaner on to asuitable soft surface.
■ When using the robotic vacuum cleaner to clean rooms with carpets, remove the side
rotary brushes. When disassembling, use force to slide the brushes upwards off the pins.
LOCATION OF THE CHARGING STATION
■ The charging station B1 serves to automatically recharge the battery and the vacuum
cleaner must have good access to it.
■ Select alocation for the charging station that is hard, horizontal and dry, and that is within
reach of apower socket. Make sure that there are no stairs or obstacles within adistance of
at least 1.5m on the left, right and in front of the charging station that would prevent the
vacuum cleaner from finding the charging station and docking successfully. It is appropriate
to position the rear part of the charging station against awall or apiece of furniture.
■ Insert the plug of the power adapter into socket B3, and insert the power cord plug
into apower socket. Place the power cord in such away that it does not tangle into the
cleaning brushes or the wheels of the robotic vacuum cleaner.
■ In the event that the vacuum cleaner is not used for an extended period of time,
disconnect the charging station from the power socket and store it in adry, clean and
cool place.
CHARGING THE BATTERY FOR THE FIRST TIME
■ Before using the vacuum cleaner for the first time, it is necessary to fully charge the
battery for at least 12 hours.
■ Check that the charging station is correctly positioned and connected to apower
socket according to chapter LOCATION OF THE CHARGING STATION.
■ Open the cover A3 and set the main switch A7 to the ON position.
■ Grasp the robotic vacuum cleaner and manually place it into the charging station so
that the charging contacts A10 on the underside of the robotic vacuum cleaner and
the charging contacts B2 on the charging station are connected. When the contacts
are connected, the charging process will start.
■ During the charging process, the indicator light in button A2 will flash white.
■ When the battery is fully charged, the indicator light will remain permanently lit white,
avoice message will be sounded and the charging process will end automatically. The
vacuum cleaner is now ready for use.
Note:
Further details about automatic or manual charging of the robotic vacuum
cleaner are found in chapter CHARGING THE ROBOTIC VACUUM CLEANER
INSERTING AND REPLACING BATTERIES IN THE REMOTE
CONTROL
Insert two type AAA (1.5 V) batteries into the remote control. When inserting the
batteries ensure the correct polarity as shown inside the battery compartment.
In the event that the batteries are flat, replace them with new ones. Do not combine
various types of batteries or new and old batteries.
The signal range of the remote control is approximately 5m.
Operation
Note:
Before starting the vacuum cleaner, always check that the dust container,
together with the HEPA filter, is inserted in place.
TURNING ON
■ Open the cover A3 and set the main switch A7 to the ON position.
■ Press button A2 on the vacuum cleaner or button C4 on the remote control. The
indicator inside the button will be lit, a voice message will be sounded and the
vacuum cleaner will switch to the stand-by mode.
STAND-BY MODE
■ The stand-by mode means that the vacuum cleaner is idle but ready for operation.
Button A2 is backlit white and the vacuum cleaner awaits acommand.
… 8 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SRV 8550 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SRV 8550 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info