759455
9
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
10/2018
- 9 -
Copyright © 2018, Fast ČR, a.s.
EN Robotic vacuum cleaner
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly, even
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described in
this user’smanual. Keep this user’smanual in asafe place where it can be easily
retrieved for future use.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
DESCRIPTION OF THE ROBOTIC VACUUM CLEANER
A1 Dust container compartment lid
A2 First inflow micro-filter
A3 Second inflow micro-filter
A4 Dust container
A5 Dust container lid
A6 Dust container folding handle
A7 Button for opening the dust
container compartment lid
A8 Infrared signal receiver
A9 Control button with aLED
indicator
A10 Bumper
A11 Front sensors
A12 Vents
A13 Removable mop head
A14 Suction opening
A15 Motorised left wheel
A16 Clamp for securing andreleasing
the central rotary brush
A17 Removable central rotary brush
A18 Removable side rotary brush
A19 Connector with cover
it is intended only for service
purposes.
A20 0/I switch (off/on)
serves toturn the power to
the robotic vacuum cleaner on
andoff.
A21 Motorised right wheel
A22 Rubber squeegee
A23 Removable side rotary brush
A24 Battery compartment cover
A25 Front swivel wheel
A26 Charging contacts
A27 Bottom sensors
OVERVIEW OF ACCESSORIES
B1 Charging station
B2 Power adapter
B3 Rechargeable battery
B4 Remote control
B5 Side rotary brushes (4 pcs)
B6 Mop head
B7 Textile mop sleeve
B8 Side rotary brush attachment
screws (2 pcs)
B9 Battery type LR03/AAA (2 pcs)
B10 Hex key combined with cross-
head screwdriver
DESCRIPTION OF THE CHARGING STATION
C1 Indicator light
signals that the charging station
is connected to apower socket.
C2 Power adapter power cord
connector socket
C3 Infrared navigation signal
transmitter
C4 Infrared anti-collision signal
transmitter
C5 Charging contacts
DESCRIPTION OF THE REMOTE CONTROL
D1 LCD display
D2 Time display
D3 Automatic cleaning mode repeat
function setting indicator
D4 Number of automatic cleaning
cycles
D5 Automatic cleaning mode setting
indicator
D6 Along-the-wall cleaning mode
setting indicator
D7 Button
D8 Forward direction button
D9 Left direction button
D10 Mode selection button
D11 Automatic cleaning repeat
activate or deactivate setting
button
D12 Current time setting button
D13 Planned cleaning function setting
indicator
D14 Battery power level indicator
D15 Return to charging station mode
and charging mode indicator
D16 Spiral cleaning mode setting
indicator
D17 Button
D18 Right direction button
D19 Planned cleaning activate or
deactivate setting button
FEATURES OF THE ROBOTIC VACUUM CLEANER
The robotic vacuum cleaner can be used for cleaning various types of hard
floors such as wooden or laminate floating floors, tiles, vinyl, etc. and carpets
with alow pile. In the automatic cleaning mode, the vacuum cleaner effectively
combines various routes to optimally clean the entire floor area.
The suction opening A14 is equipped with a rotary brush A17, which
effectively removes hair, animal fur, etc. The two side rotary brushes A18 and
A23 brush dirt out of hard-to-reach places along walls and furniture and out
of corners.
The motorised rubber wheels A15 and A21 protect sensitive floors against
scratching and can travel over threshold strips up to aheight of 1.5 cm. The
infrared sensors A11 in the front bumper A10 prevent the robotic vacuum
cleaner from colliding with obstacles. Safe operation in rooms with stairs is
made possible by the bottom anti-stair-fall sensors A27.
In the event that the voltage on the battery B3 falls below acertain level, the
robotic vacuum cleaner will automatically search out the charging station B1
and dock into it to recharge before further use.
The remote control B4 enables comfortable control by allowing the setting
of the operating mode, number of automatic cleaning cycles, cleaning time
planning or for locating the vacuum cleaner via an acoustic signal.
OVERVIEW OF THE OPERATING MODES
AUTOMATIC CLEANING MODE
The robotic vacuum cleaner effectively combines various routes, see figure E1,
to optimally clean the entire floor area.
ALONG-THE-WALLS CLEANING MODE
The robotic vacuum cleaner travels along the perimeter of the room, see
figure E2, and the motorised rotary brushes A18 and A23 effectively brush out
dirt from the area along the walls, furniture and in corners to ensure perfect
cleaning results.
SPIRAL CLEANING MODE
The robotic vacuum cleaner moves in aspiral to clean alocation with ahigher
concentration of dirt, see figure E3.
RETURN TO CHARGING STATION AND CHARGING MODE
The robotic vacuum cleaner will automatically switch to the return to charging
station B1 mode whenever it detects low voltage in the battery B3 during
operation.
In this mode the robotic vacuum cleaner automatically seeks out the route to
the charging station B1, see figure E4, and docks itself to enable the battery
B3 to recharge. If it is unsuccessful, it will keep trying until it docks itself
successfully. As soon as it docks itself successfully, the charging cycle will
commence.
Make sure that the charging station B1 is located in accordance with the
instructions provided in chapter Installation location and using the charging
station. Otherwise, the vacuum cleaner may not dock successfully.
INSTALLING AND USING THE SIDE ROTARY BRUSHES
Turn the vacuum cleaner upside down. Prepare the side rotary brushes B5
(2pcs), screws B8 (2 pcs) and the hex key B10. Using the screws B8 and the
hex key B10, attach the rotary brushes B5 in the locations shown in figure F.
Turn the robotic vacuum cleaner back over to the operating position.
The side rotary brushes A18 and A23 are intended for smooth floor surfaces
and ensure effective cleaning in corners, along walls and furniture.
When using the robotic vacuum cleaner to clean rooms with carpets, remove
the side rotary brushes A18 and A23. To remove them proceed in the reverse
sequence.
ATTACHING THE MOP AND ITS USE
Turn the vacuum cleaner upside down. Attach the textile sleeve B7 to the mop
head B6 using the Velcro zip and attach the assembled mop to the robotic
vacuum cleaner as shown in figure G. Turn the vacuum cleaner back over to
the normal operating position.
Only use the mop intended for this type of robotic vacuum cleaner. Do not use
the mop head B6 without the textile sleeve B7.
The mop is only an auxiliary function to the robotic vacuum cleaner and is
intended for cleaning smooth hard floor areas. The dry mop can be used for
wiping dust off the floor. Adampened mop may be used for wiping floors.
The mop is not intended for cleaning carpets. The mop is removed in the
reverse sequence.
INSERTING AND REPLACING BATTERIES IN THE REMOTE
CONTROL
Release the tab in the bottom part of the removable battery compartment
cover and remove the cover, see figure H1 and H2.
Insert two type LR03/AAA (2× 1.5 V) batteries B9 into the remote control B4.
When inserting the batteries ensure the correct polarity as shown inside the
battery compartment. Close the cover, see figure H3.
In the event that the batteries are flat, replace them with new ones. Do not
combine various types of batteries or new and old batteries.
The signal range of the remote control B4 is approximately 6 m.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SRV 2010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SRV 2010 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,54 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info