759456
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
EN-10
EN
Robotic vacuum cleaner
SRV 1000SL
2020 07/2020
Turn on the robotic vacuum cleaner by pressing the power button A3. The robotic vacuum cleaner will start
vacuuming.
The indicator on the power button is not lit in any colour when the robotic vacuum cleaner is running. In the event
that an error occurs, for example one of the wheels on the robotic vacuum cleaner becomes jammed, the indicator
will be lit red and an acoustic signal will be made.
If the dust container fills up while vacuuming, the indicator will be lit red and asound signal will be made.
If the battery is almost flat, the robotic vacuum cleaner will stop automatically. The indicator will be lit red and an
acoustic sound will be made. When the battery is completely flat, the red indicator will turn off.
To stop the vacuum cleaner, press the power button A3.
Empty the dust container A5 after each use according to the instructions contained in chapter Maintenance and
cleaning.
USING THE MOP
The mop is an auxiliary function to the robotic vacuum cleaner and is intended for dry or wet cleaning of smooth
hard floor areas. It consists of the holder B4 and an anti-static duster B5.
Attention:
Only use the mop intended for this type of robotic vacuum cleaner.
Do not use the holder B4 without the anti-static duster B5.
The mop is not intended for cleaning carpets.
Attach the anti-static duster B5 to the holder B4 using the Velcro zip tape on the holder.
Turn the vacuum cleaner upside down. Click the assembled mop into the holes A14 and A19 in the robotic vacuum
cleaner and turn it back over to its normal operating position.
Start the robotic vacuum cleaner.
When you have finished cleaning, remove the mop in reverse sequence to its installation. Rinse the duster B5 under
running water, thoroughly wring it dry and allow it to dry.
CHARGING THE ROBOTIC VACUUM CLEANER
Prior to charging it, always turn off the robotic vacuum cleaner using the power button A3.
Insert the power adapter plug B2 on the power adapter cable B1 into the socket A9 of the vacuum cleaner, and
insert the power adapter mains plug into apower socket.
During the charging process, the indicator on the power button A3 will flash blue. Thereafter, astandard charge
will take approximately 4 hours.
When the battery is fully charged, the indicator on the power button A3 will remain permanently lit blue. The robotic
vacuum cleaner is now ready for use.
Note:
To ensure optimal performance of the battery and to extend its lifespan, we recommend that you always
allow the battery to fully recharge.
If you forget to turn off the robotic vacuum cleaner before charging the battery, you need to first turn it
off after charging it and only then turn it on again.
CARING FOR THE BATTERY
We recommend that you do not interrupt the charging cycle and that you maintain the battery C1 in acharged state.
Do not leave the robotic vacuum cleaner standing fully charged or completely flat for an unnecessarily long period
of time.
Abattery C1 that is allowed to remain flat for along time may self-discharge below apermissible level and thereby
cause irreparable damage to itself.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SRV 1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SRV 1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info