759456
9
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Robotic vacuum cleaner
SRV 1000SL
EN
EN-9
2020 07/2020
PREPARING THE ROBOTIC VACUUM CLEANER FOR OPERATION
INSTALLING AND USING THE ROTARY BRUSHES
The rotary brushes A11 and A16 are intended for smooth floor surfaces and ensure effective cleaning in corners,
along walls and furniture.
Turn the vacuum cleaner upside down. Prepare the rotary brushes A11 and A16. Gradually push both the brushes
precisely and with force on to the pins intended for them. While doing this, make sure that the marks L and R
both on the brushes and on the robotic vacuum cleaner match. Turn the robotic vacuum cleaner back over to the
operating position.
When using the robotic vacuum cleaner to clean rooms with carpets, remove the rotary brushes. When removing
them, proceed in the reverse sequence to their installation.
INSERTING AND REMOVING THE BATTERY
The robotic vacuum cleaner is equipped with aLi-ion battery C1. If the battery is packed separately, it is necessary
to connect it to the robotic vacuum cleaner before first use. Use only the original battery type.
Make sure that the robotic vacuum cleaner is turned off with the power button A3. Turn the robotic vacuum cleaner
upside down and pull off the cover A15.
Connect the connector C2, which is located inside the battery compartment, to the battery connector C3. The
battery can only be connected in one direction.
Insert the battery into the battery compartment C3.
Put the cover A15 back on and turn the robotic vacuum cleaner back over to the operating position.
Take the battery C1 out in reverse sequence. Prior to removing the battery, always check that the robotic vacuum
cleaner is turned off using the power button A3.
When the robotic vacuum cleaner will not be used for an extended period of time, take out the battery and store
it in adry, clean and cool place out of children‘sreach.
CHARGING THE BATTERY FOR THE FIRST TIME
Before using the robotic vacuum cleaner for the first time, it is recommended to fully charge the battery for aperiod
of at least 8 hours. Thereafter, astandard charge will take approximately 2 - 2,5 hours.
Insert the power adapter plug B2 on the power adapter cable B1 into the socket A9 of the vacuum cleaner, and
insert the power adapter mains plug into apower socket.
During the charging process, the indicator on the power button A3 will flash blue.
When the battery is fully charged, the indicator on the power button A3 will remain permanently lit blue. The robotic
vacuum cleaner is now ready for use.
OPERATING THE ROBOTIC VACUUM CLEANER
Note:
Before starting the robotic vacuum cleaner, always check that the dust container A5, together with the
dust filter A7, is inserted in place.
Place the vacuum cleaner on the floor in alocation with enough free space. Check that the entry door into your
apartment or house is closed. From the floor surfaces, remove clothing, paper, toys, power or extension cords and
other items that the vacuum cleaner could suck in or catch. Lift curtains and drapes that reach to the floor so that
they do not get caught in the vacuum cleaner.
Tip:
When vacuuming in anew environment for the rst time, carefully observe the movement of the robotic
vacuum cleaner. This will enable you to recognise problematic obstacles and remove them for the next
cleaning session.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SRV 1000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SRV 1000 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info