17
Connecting Flash Link optical cable to NON-SeaLife cameras
(continued)
3. Loosen the set screw of the universal
adapter with the small Allen wrench
provided.
4. Insert the optical cable into the hole as
shown above and push the cable as far
as possible without the cable sticking
out on the other side of the adapter.
5. Carefully tighten the set screw until
you feel it makes contact with the
cable then give it another
1
⁄4 turn. Gently pull at the cable to
make sure it is secure. Do not over tighten the set screw or
you will damage the optical cable.
6. Press the cable adapter onto the housing as shown above.
3. 4. 5.
6.
