782189
17
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
17
de déchet pour quelques sciages d‘essai; réajustez la
position de la table si nécessaire.
Remarque:la table ne doit pas être appuvêele bloc du mo-
teur. Ceci risque de provoquer des bruits indêsirables.
Table de sciage horizontale et déoupages de blais, Fig. 2+3
La table de sciage peut être inclinée à 45° à gauche
ou laisseé en position horizontale.
Vous trouverez sous la table de travail l‘échelle
d‘angles pour lire I‘angle d‘inclinaison approximatif.
Pour un réglage plus précis, utilisez du bois de dechet
pour quelques sciages d‘essai; réajustez la position de
la table si nécessaire.
Montage du protecteur de lame, Fig. 4
Avec prudence, montez le protecteur de lame sur la scie,
comme I‘indique I‘illustration. Fixez súrement la vis avec
un écrou et une rondelle.
Soulevez la scie par le cadre et le socle et poussez-Ia
sur la table d‘ouvrage.
Familiarisez vous avec les èlèments d‘utilisation et les
caractèristiques de puissance de la scie.
Montage de la scie sur un établi, Fig. 5
Un établi en bois massif est plus adapté à I‘installation
de Ja scie qu‘un tréteau à panneau dur, oú la vibration
et le bruit sont dérangeants.
Les outils et le petit matériel de montage nécessaires
pour le montage sur un établi ne sont pas livrés avec
la scie. Utilisez cependant un équipement qui a au
moins la taille suivante :
1 Corps de la scie
2 Support en caoutchouc mousse
3 Table d‘ouvrage
4 Garniture plate
5 Rondelle
6 Ecrou à six aretes
7 Contre-écrou
8 Vis à six arêtes
Quantité Description
4 Vis à six aretes (6 mm) 1/4-20 x longueur
4 Rondelles (7 mm) 9/32 I.D.
8 Ecrous à 6 aretes (6 mm) 1/4-20
5/16“ (8 mm) Dia.
4 Rondelle (7 mm) 9/32 I.D.
Commencez par percer les traus dans la surface partante
et mettez ensuite les vis.
II n‘est pas non plus livré avec la scie de support en
caoutchouc mousse. Mais nous recommandons forte-
ment I‘utilisation d‘un tel support pour maintenir un
cause undesireable noise.
Horizontal saw bench and diagonal cuts, Fig. 2+3
The saw bench can be positioned into a 450 diagonal
position or be left in the horizontal position.
You can read off the approximate slope angle by using
the angle scale located under the work bench. For
more exact adjustment, use scrap wood for some saw
tests; adjust the bench if necessary.
Blade guard assembly, Fig. 4
Install the blade guard to the holder as shown in the
diagram. Secure the screws with a nut and washer.
Lift the saw onto the frame and base and push it onto
the workbench.
Familiarize yourself with the saw operating elements
and features.
Mounting the saw on a work bench, Fig. 5
A workbench made from solid wood is betier than one
made of plywood, as interfering vibrations and noise
are more noticeable with plywood.
The necessary tools and small parts for assembling
the saw on a workbench are not supplied with the saw.
However, use equipment of at least the following size:
1 Saw body
2 Foam rubber base
3 Work bench
4 Flat seal
5 Washer
6 Hexagonal nut
7 Lock nut
8 Hexagonal bolt
Ouantity Description
4 Hexagonal bolts (6mm) 1/4-20 x length
4 Flat seal (7mm) 9/321.0
4 Washers (7mm) 9/321.0.
8 Hexagonal nuts (6 mm) 1/4-20
First of all, drill holes into the seating surface and then
insert the screws.
A foam rubber base for reduction of noise is not
supplied with the saw either. However, we expressly
recommend that you use such a base to keep vibration
and noise to a minimum. Ideal size 400 x 240 mm.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach SD1600F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach SD1600F in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 2.55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info