782189
13
Verklein
Vergroot
Pagina terug
1/120
Pagina verder
13
ADDITIONAL SAFETY RULES FOR SCROLL SAWS
This scroll saw is intended for use in dry conditions,
and for indoor use only.
Do not cut pieces of material too small to hold by hand
outside the blade guard.
Avoid awkward hand positions where a sudden slip
could cause a hand to move into the blade.
Always use the blade guard to avoid possible injury
due to blade breakage.
Never leave the scroll saw work area with the power
01), or before the machine has come to a complete
stop.
Do not perform layout, assembly or set up work on the
table while the cutting tool is in operation.
Never turn your scroll saw on before clearing the table
of all objects: (tools, scraps of wood, etc) except for
the workpiece and related feed or support devices for
the operation planned.
m Proper use
CE tested machines meet all valid EC machine guidelines as
well as all relevent guidelines for each machine.
The machine must only be used in technically perfect
con dition in accordance with its designated use and
the in structions set out in the operating manual, and
only by safety-conscious persons who are fully aware
of the risks involved in oerating the machine. Any
functional dis orders, especially those affecting the
safety of the machine, sholud terefore be rectified
immediately.
The safety, work and maintenance instructions of the
manufacturer as well as the technical data given in
the calibrations and dimensions must be adhered to.
Relevant accident prevention regulations and other,
gene rally recognized safety-technical rules must also
be adhered to.
The machine may only be used, maintained, and
operated by persons familiar with it and instructed
in its operation and procedures. Arbitrary alterations
to the machine release the manufacturer from all
responsibility for any resulting damages.
The machine may only be used with original accessories
and tools made by the manufacturer.
Any other use exceeds authorization. The manufacturer
is not responsible for any damages resulting from un-
authorized use; risk is the sole responsibility of the
operator.
le concernant. Les travaux de réparation ne devraient
être exécutés que par une personne qualifiée utilisant
des piéces de rechange originales, car I’utilisateur
s’expose sinon à un danger majeur .
RÈGLES DE SÉCURITÉ SUPPLÉMENTAIRES POUR
LES SCIES À DÉCOUPER
Cette scie à découper ne doit être utilisés que dans
des espaces secs et non à I’exterieur.
Ne découpez pas en dehors de la tôle de protection
des objets trop petits pour être tenus dans la main.
Ne mettez pas votre main dans des positions
défavorables où elle risque dans un glissement soudain
de passer facilement dans la lame de scie.
Travaillez toujours avec la tôle de protection afin de
ne pas risquer de vous blesser dans une craquelure
de la lame descie.
Ne quittez jamais votre lieu de travail quand la scie à
découper est en marche ou que la machine n’est pas
encore tout á fait arrêtée.
Pendant que I’outil à découper est en service, vous
ne devez pas exécuter de travail de tracé, de montage
ou de onstruction.
Ne mettez en marche la scie à découper qu’après
avoir retiré de la table tous les objets (outils, éclisses,
etc.), excepté la piéce d’œuvre et les objets destinés
à I’alimentation ou à servir de support pour le travail
projeté.
m Utilisation conforme
La machine est conforme à la directive machines CEE en
vigueur.
Les consignes de sécurité, ainsi que les prescriptions
pour le travail et la maintenance, fournies par le
fabricant doivent être respectées au même titre que
les dimensions indiquées dans les caractéristiques
techniques.
Les consignes correspondantes pour la prévention des
accidents et les autres réglementations généralement
reconnues doivent être respectées.
Seules des personnes compétentes ayant été initiées
et informées sur les dangers possibles ont le droit
de manier, d’entretenir ou de réparer la machine.
Des modifications sur la machine effectuées
sans autorisation entraînent une exclusion de la
responsabilité du fabricant pour tous dangers éventuels
en résultant.
La machine ne doit être utilisée qu’avec des
accessoires et des outils d’origine du fabricant.
Toute utilisation autre que celle spécifiée est
considérée comme non conforme. Le fabricant ne
peut être tenu responsable pour d’éventuels dommages
résultant d’une telle utilisation, seul l’exploitant en
est responsable.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach SD1600F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach SD1600F in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 2.55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info