781929
26
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
26
the main switch in the event of an emergen-
cy.
Never clean electrical equipment with water
or similar liquids.
Information for work on hydraulic
equipment:
All work on the hydraulic equipment of the
machine may only be performed by qualified
personnel trained for this purpose as a basic
rule.
Before working, de-pressurise all hydraulic
systems / system parts.
Make sure that suitable collection containers
are available for all materials harmful to
groundwater (oils, coolant, etc.) before
beginning work.
Duties before finishing work
After completion of the service tasks and
prior to starting the machine, the following
points must be observed:
Fill in the test reports, task reports, etc.
Re-check all previously unscrewed
screw connections for firm seating.
Check whether all previous removed
protective devices, covers, container
lids, etc. are properly re-mounted.
Make sure that all tools, equipment
and materials which were used have
been removed from the work area.
Clean the work area and remove any
spilled liquids and similar materials.
Make sure that all the machine's safety
equipment functions properly again.
Test the function of the safety equip-
ment. Do not release the machine for
use if the safety equipment does not
function properly.
Mount and secure the disassembled
protective devices.
Remove all tools, foreign parts and
operating materials left lying around.
Perform a test run with a functional
check of the serviced components.
Secure the machine against unauthor-
ised start-up if you have not completed
the work.
Handling of open flames and smoking
are prohibited.
Maintenance
Cleaning
The conveyor belt should be cleaned thor-
oughly after each use. This will increase the
service life of the machine considerably.
Inspecting the rubber belt
After each use the rubber mats must be
inspected for damage and replaced as neces-
sary.
Check the cable for the cable winch
The cable must be inspected before and after
each use for damage. It may not have any
kinked or crushed areas. Similarly, individu-
al strands may not be broken.
If any damage is present on the cable, it must
be immediately replaced.
Inspect all cable rolls for signs of wear.
Tensioning the conveyor belt
The conveyor belt must be re-tightened
regularly. For this purpose, first loosen the 4
screws (10). Then the upper deflection pul-
ley can be shifted over the two threaded rods
(11).
In the process, always make sure that the re-
tightening takes place to an equal extent on
both sides. Otherwise the conveyor belt
would not longer run in the centre.
26

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Muli 4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Muli 4000 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1.8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info