781929
25
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
25
Immediately replace all parts that are
not fault-free.
Only use original spare parts.
Make sure that suitable collection
containers are available for all materi-
als harmful to groundwater (oils, cool-
ant, etc.).
All work steps for the service of the
machine must be performed in the
specified sequence.
De-pressure all pressure-carrying
units.
Only use the specified operating mate-
rials.
Repair work may only be performed
by authorised qualified personnel - the
accident prevention regulations must
be observed.
All work on the electrical equipment of
the machine may only be performed by
electricians as a basic rule.
Self-locking screws and nuts must
always be replaced.
All operating materials, lubricants and
auxiliary materials that will not be re-
used must be disposed of in an envi-
ronmentally friendly manner.
Severe machine damage can occur
from the installation of incorrect spare
parts or wear parts.
There is a risk of fire form welding
work. Keep a fire extinguisher on hand.
Improperly routed lines (e.g. too-small
bending radius) can cause smouldering
fires and cable fires.
Spilled lubricant, solvent, preservative,
etc. can cause skin irritation in the
event of direct contact with the skin.
Never release the machine for opera-
tion without the factory-installed safe-
ty equipment.
Removing safety notices affixed to the
machine is strictly prohibited.
Always observe the warning notices
affixed to the machine. They help to
prevent hazards.
Do not perform any repairs for which
you are not qualified.
Wear close-fitting work clothing so
that you clothing cannot become en-
tangled in moving parts.
When performing maintenance or
service tasks, wear insulated safety
shoes with thick crepe soles.
There is an elevated risk of injury
during unsecured manual operation.
Switch off all voltage sources and
secure the voltage sources against in-
advertent restarting.
There is a risk of crushing at various
locations on the machine from moving
or rotating assemblies. Therefore, al-
ways maintain a sufficient safety clear-
ance during test runs.
Do not touch live parts. Electric shock
can lead to severe injury or death.
Immediately repair damaged cables.
Replace faulty or damaged pressure
lines immediately. Otherwise severe
injuries can result.
Never exceed the defined technical
values for normal operation.
Make sure that the specified operating
materials are available in the plant in
sufficient quantities.
Also read the chapter "General safety
instructions".
Information for work on electrical
equipment
All work on the electrical equipment of the
machine may only be performed by electri-
cians as a basic rule.
Regularly inspect electrical equipment: Re-
tighten loose connections - immediately
replace damaged lines or cables - ...
For all work on live machine parts or lines, a
second person must be present to switch off
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Muli 4000 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Muli 4000 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 1.8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info