782095
27
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
27
Installation
Make sure there is sufcient space for handling the
work piece over the whole length without the operator
(or another person) having to stand in line with the
work piece.
Using bolts, washers and hexagon nuts (not supplied
with the machine), the planer/thicknesser can be
bolted to a work bench.
The planing machine must be bolted onto a rm, level
surface.
The machine may not tilt.
Machine setting up and functions
The electric planer/thicknesser is transportable. It is
powered by a single-phase motor and is double insu-
lated. It has been designed for planing wood, and it
features a rational construction, easy operation, and
high efciency.
Maintenance
Always pull the power supply plug before doing any
servicing work. Having nished the work, put the
cutter block guard in operating position again.
Machine care
The planer/thicknesser requires little maintenance. The
ball bearings are permanently lubricated. After approx.
ten operating hours, lubrication of the following parts
is re commended:
Bearing of the infeed and output roller
Bearing of pulley and sprocket
Greasing the chain.
The threaded spindle for height-adjustment of the thick-
nessing table may only be treated with a dry lubricant
agent.
The table surfaces as well as the infeed and output
rollers must always be kept free from resin.
Regularly clean infeed and output rollers.
In order to avoid overheating of the motor, regularly
check the air openings for any dust sticking on.
After a longer period of use, it is recommended to
have the machine checked by an authorized dealer
service.
Tool care:
Cutter block, clamping devices, knife supports and
knives must be regularly cleaned from resin, as
a clean tool improves the planing quality. To this
purpose, clamping devices, knife supports and knives
can be put in a common resin remover for 24 hours.
Resin from aluminium tools may only be removed with
cleaning liquids not being aggressive to this type of
Installation
Vérier qu’il y a sufsamment d’espace pour guider le
bois sur toute sa longueur, sans qu’une personne ou
l’utilisateur puisse se trouver en ligne avec la pièce
de bois en cours d’usinage.
Le rabot-dégau peut être xé sur un établi à l’aide de
boulons, rondelles et écrous hexagonaux (non fournis).
Le rabot-dégau doit être vissé solidement sur une
surface stable et lisse.
La machine ne doit pas basculer et les tables doivent
être alignées
Construction et fonctions de la machine
Le rabot-gau peut être transporté. Il est entraîné par
un moteur monophasé et possède une double isolation.
Il a été conçu pour travailler le bois. Sa construction
est rationnelle ,très efciente, son utilisation est aisée
Entretien
Lors de toute oration dentretien et de net-
toyage, arrêter le moteur et débrancher la prise
d’alimentation. Une fois les travaux achevés, tous
les dispositifs de protection doivent être remontés
immédiatement.
Entretien de la machine:
Le rabot-gau exige peu dentretien. Les paliers sont
graissés à vie. Après 10 heures de fonctionnement, il
est recommandé de huiler les éléments suivants:
Paliers des rouleaux d'avance et de sortie
Paliers de la poulie et de la roue dentée
Graissage de la chaîne.
La broche letée pour le réglage en hauteur de la table
de rabotage doit uniquement être traitée avec un lubri-
ant sec.
Il faut veiller à ce que les tables et les rouleaux ne
présentent aucune trace de résine.
Les rouleaux encrassés doivent être nettoyés.
Pour éviter l’échauffement du moteur, contrôler réguliè-
rement si les ouvertures dair sont libres de poussière.
Après une utilisation prolongée, il est recommandé
de faire inspecter la machine par un atelier dentretien
agrée.
Entretien des outils:
Enlever régulièrement la résine de l’arbre de rabotage,
des dispositifs de serrage, des supports de fers et des
fers. Un outil propre améliore la qualité de coupe. Pour
enlever la résine, les outils peuvent être immergés
pendant 24 heures dans un produit de dérésinage du
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Kity DRA 260 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Kity DRA 260 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2.01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info