782095
9
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
9
Dust emission parameters
The dust emission parameters measured according to
the principles for measuring dust emissions (concen-
tration parameters) for woodworking machines speci-
ed by the German wood professional committee, are
below 2 mg/m³. Dust emissions can therefore be con-
tinuously kept within the range allowed under currently
valid German regulations by connectingh the machine
to a vacuum exhaust system with an airow speed of
at least 20 m/s.
Depending on the particular type of work piece, the
stress values of the manufacturer must be observed.
General Notes
When you unpack the device, check all parts for
possible transport damages. In case of complaints
the supplier is to be informed immediately. Complaints
received at a later date will not be acknow ledged.
Check the delivery for completeness.
Read the operating instructions to make yourself
familiar with the device prior to using it.
Only use original scheppach parts for accessories as
well as for wearing and spare parts. Spare parts are
available from your specialized dealer.
Specify our part numbers as well as the type and year
of construction of the device in your orders.
Before commissioning, be aware of the safety notices.
All protective and auxiliary equipment, especially the
guard must be attached. Carry out work such as re-
tooling, adjusting, measuring and cleaning only when
the motor is switched off. Disconnect the mains plug!
In these operating instructions we have marked the
places that have to do with your safety with this
sign: m
m General Safety Rules
Hand on these safety notes to all people working on
the machine. The instructions must be read by every
operator before starting work. During the work, it is too
late. This is especially applicable to personnel not work-
ing regularly on the machine, for instance when doing
preparation, adjusting or servicing work.
1. Keep work area clear
Cluttered areas and benches invite injuries.
2. Consider work area environment
Do not expose tools to rain.
Do not use tools in damp or wet locations.
Keep work area well lit.
Do not use tools in the presence of ammable
liquids or gases.
3. Guard against electric shock
Avoid body contact with earthed or grounded
surfaces (e.g. pipes, radiators, ranges,
Données concernant les émissions de poussière
Lors du contrôle des émissions de poussière produites
par les machines à bois, la valeur admissible ( concen-
tration de poussière dans le volume d’air ambiant) selon
les principes appliqués par les organismes de contrôle
ofciels est de 2 mg /m3 au maximum.
En raccordant la machine à un système d’aspiration
réglementaire dont la vitesse d’air est d’au moins 20
m/s, il est donc possible de respecter durablement et
de façon sûre les valeurs limites TRK d’émission de
poussière de bois applicables en République Fédérale
d’Allemagne.
Selon le matériau traité, il faut observer les valeurs
limites indiquées par le fabricant.
Instructions générales
Vériez dès la livraison, qu’aucune pièce n’ait
été détériorée pendant le transport. En cas de
réclamation, informez immédiatement le livreur et
faites les réserves nécessaires, aucune réclamation
ultérieure ne pourra être prise en compte.
Vériez que la livraison est bien complète.
Familiarisez-vous avec l’appareil à l’aide de la notice
d’utilisation avant de l’utiliser.
N’utilisez que des pièces d’origine, consommables,
pièces de rechange et accessoires que vous trouverez
chez votre revendeur habituel.
Pour commander des pièces indiquez toujours le type et la
référence de la machine ainsi que son année de fabrication.
Avant la mise en route, veillez à tenir compte des
informations concernant la sécurité. Rous les
dispositifs de protection et d’aide au fonctionnement
doivent être en place et en état de fonctionnement.
Les travaux de réglage ,de mesure et de nettoyage ne
doivent être effectués que lorsque l’appareil est arrêté
et débranché du réseau.
Dans ces instructions de service, nous avons mar-
qué les passages relatifs à la sécurité avec le sym-
bole: m
m Consignes de sécuri
Faites passer les consignes de sécurité à toutes
les personnes travaillant sur la machine. Avant
de commencer à travailler, l’utilisateur doit lire
le manuel et particulièrement les instructions de
sécurité. Pendant le travail, il est trop tard. Ceci
est spécialement important pour les personnes ne
travaillant avec la machine qu’occasionnellement
(travaux de préparation, entretien, etc.).
1 Maintenez de l’ordre dans votre domaine de travail
Le désordre dans le domaine de travail augmente
le risque d‘accident.
2 Tenez compte de l’environnement du domaine de
travail
N‘exposez pas les outils électriques a la pluie.
N‘utilisez pas d‘outils électriques dans un envi-
ronnement humide ou mouille.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach Kity DRA 260 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach Kity DRA 260 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2.01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info