782148
18
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
18 / 28
10. Storage
Store the device and its accessories in a dark, dry and
frost-proof place that is inaccessible to children. The
optimum storage temperature is between 5 and 30˚C.
Store the electrical tool in its original packaging.
11. Electrical connection
Connection and repair work on the electrical equip-
ment must be carried out by a qualied technician
only.
The installed electric motor is factory connected rea-
dy for operation.
The connection made by the customer as well as any
extension cables used must comply with all relevant
regula tions.
Importand note
Defective electrical connection cables
If the power cable is damaged, it must be replaced by
the manufacturer, its customer service or a similarly
qualied person to avoid hazards.
Electrical connection cables often suffer isolation da-
mage.
Possible causes are:
Pinch points when connection cables are run
throught window or door gabs.
Kinks resulting from incorrect attachment of laying
of the connection cable.
Cuts resulting from running over the connection
cable.
Isolation damage resulting from forcefully pulling
out of the wall socket.
Such defective electrical connection cables must not
be used as the isolation damage makes them extrem-
ly hazardous.
Check electrical connection cables regularly for da-
mage. Make sure the cable is disconnected from the
mains when checking.
Electrical connection cables must comply with the re-
gulations applicable in your country.
One phase motor
The mains voltage must comply with the specica-
tion on the motor name plate.
Extension cables must have a cross section of at
least 1.0 sqmm.
The mains is protected by a 16 A slowblow fuse.
When making inquiries please specify the fol-
lowing:
Motor manufacturer
Motor current type
Motor nameplate specications
Switch nameplate specications
When sending the motor in, always send the comple-
te drive unit including the switch.
Slide the clamp through the tabs on the lter bag
and x the lter bag on the container. Fig. 7
Position the support bar into the housing and hang
the lter bag from it. Fig. 1
Attach the shavings bag to the lower air ventilator
using the clamp. Fig. 7
Attach the exhaust hose to the nozzle on the
housing and afx it with a hose clamp. Fig. 8
Attach the hose coupling to the other end of the
hose using a hose clamp. Fig. 9
The exhaust system should be cleaned every time
the shavings bag is changed.
Damaged lters and bags must be immediately chan-
ged in order to keep the amount of dust that escapes
into the work environment as low as possible.
8. Initial operation
Note safety instructions before operation. The data
on the motor type plate (voltage and frequency) must
conform to the mains supply voltage and frequency.
After connection to the mains, the Dust Extractor is
ready for operation.
Switching off/on in automatic mode (Fig.10)
The ON/OFF switch (17) has three settings:
1. Switch position 0 : Off
2. Switch position = : On
3. Switch position AUTO: Automatic mode (The ext-
ractor system is switched on/off via an electric tool).
Connect the power cable of your electric tool to the
automatic socket-outlet.
Connect the extractor hose to the dust extractor
connection of your electric tool. Check that the con-
nection is secure and air-tight.
Set the switch on the extractor system to the posi-
tion “AUTO” = Automatic mode.
9. Maintenance
For all maintenance and cleaning tasks, tum off motor
and unplug mains.
Connection and repair work on the electrical instal-
lation may be carried out by a qualied electrician
only.
For constant performance, periodi cally shake out
lter bag vigorously. Between cleanings, beating
the bag with the hand several times is sufcient.
The sawdust bag must be replaced a1 the latest
when the sawdust is within 10 cm. of the housing
collar.
Special accessories
Filter bag U/S/G Part no. 3906301013
Filter catridge U/S/G Part no. 7500 6000
GB
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach DM-ABS1200E - Dineiger bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach DM-ABS1200E - Dineiger in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 6.74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info