782148
16
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
16 / 28
Check the power cable regularly and have it repla-
ced by an authorized specialist at the rst sign of
any damage.
Check your extension cables regularly and replace
them if damaged.
When working outdoors, use only extension cables
that are approved for outdoor use and which are
marked accordingly.
Concentrate on what you are doing. Use common
sense. Do not operate the tool if your mind is not
on your work.
Never use an electric tool with a switch that cannot
be turned on and off. Warning! The use of plug-
in tools and accessories other than those intended
may put you at risk of injury.
Always pull the plug out of the power socket before
adjusting or servicing the machine.
Give these safety regulations to all persons who
work on the machine.
Before you use the machine for the rst time, check
that the voltage marked on the rating plate is the
same as your mains voltage.
If you need to use an extension cable, make sure
its conductor cross-section is big enough for the
equipments power consumption. Minimum cross-
section: 1.5 mm2.
If you use a cable reel, the complete cable has to
be pulled off the reel. Check the power cable. Ne-
ver use a faulty or damaged power cable.
Do not use the cable to pull the plug out of the so-
cket.
Protect the cable from heat, oil and sharp edges.
Do not leave the machine in the rain and never use
it in damp or wet conditions.
Provide good lighting.
Do not saw near ammable liquids or gases.
Non-slip shoes are recommended when working
outdoors. Wear a hair net if you have long hair.
Avoid abnormal working postures.
Operators have to be at least 18 years of age. Trai-
nees of at least 16 years of age are allowed to use
the machine under supervision.
Keep children away from the machine when it is
connected to the power supply.
Keep your workplace clean of wood scrap and any
unnecessary objects. An untidy work area invites
accidents.
Do not allow other persons, especially children, to
touch the tool or cable. Keep them out of your work
area.
Persons working on the machine should not be dis-
tracted.
Carry out conversions, adjustments, measure-
ments and cleaning jobs only when the motor is
switched off. - Pull out the power plug!
Before switching on, make sure that all keys and wren-
ches have been removed from the tool.
Switch off the motor and pull out the power plug before
you leave the workplace.
Ret all guards and safety devices immediately after
you have completed any repairs or maintenance work.
ned only for removing saw dust (nor for normal dust).
Regularly inspect the lter for damage.
Replace damaged lters!
Regularly check that the housing is well sealed and
regularly inspect the lter and saw dust sackseals.
Do not allow foreign objects such as screws, nails,
plastic or wood chips to enter the cleaning nozzle.
The machine must only be used with original parts
and orginal accessories supplies by the manufac-
turer.
The Exhaust System is constructed exclusively for
exhaust-vacuuming wood chips and saw dust and
may only be used in connection with wood proces-
sing machines.
When vacuuming shop oors, wood or metal pie-
ces may not be vacuumed.
Any other use exceeds authorization. The manu-
facturer is not responsible for any damagesresul-
ting from unauthorized use; risk is the sole respon-
sibility of the operator.
The safety, work and maintenance instructions
of the manufacturer as well as the technical data
given in the calibrations and dimensions must be
adhered to.
Relevant accident prevention regulations and
other, generally recognized safety-technical rules
must also be adhered to.
The machine may only be used, maintained, and
operated by persons familiar with and instructed in
its operating and procedures. Arbitrary alterations
to the machine release the manufacturer from all
responsibiliy for any resulting damages.
The machine may only be used with original acces-
sories made by the manufacturer.
Please note that our equipment has not been desig-
ned for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.
5. Safety information
Attention! The following basic safety measures must
be observed when using electric tools for protection
against electric shock, and the risk of injury andre.
Read all these notices before using the electric tool
and keep the safety instructions for later reference.
Safety information
Warning: When using electric tools it is imperative
to take the following basic safety precautions in or-
der to reduce the risk of electric shock, injury and
re.
Take due note of all this information before and
while working with the machine.
Do not lose these safety regulations.
Guard against electric shock Avoid body contact
with earthed parts.
When equipment is not being used it should be kept
in a dry, closed place out of childrens reach.
Keep mounted attachments sharp and clean to
enable you to work well and safely.
GB
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach DM-ABS1200E - Dineiger bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach DM-ABS1200E - Dineiger in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 6.74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info