781698
27
Verklein
Vergroot
Pagina terug
1/108
Pagina verder
27GB
Carry the chain saw by the front handle with
the chain saw switched off and away from
your body. When transporting or storing the
chain saw always t the guide bar cover. Proper
handling of the chain saw will reduce the Iikelihood
of accidentaI contact with the moving saw chain.
Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly tensioned or lubricated chain may either
break or increase the chance for kickback.
Keep handles dry, clean, and free from oil and
grease. Greasy, oily handles are slippery causing
loss of control.
Cut wood only. Do not use chain saw for
purposes not intended. For example: do not
use chain saw for cutting plastic, masonry or
nonwood building materials. Use of the chain
saw for operations different than intended could
result in a hazardous situation.
Causes and operator prevention of kickback
Beware of kickback!
Kickback may occur when the nose or tip of the
guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and back
towards the operator.
Pinching the saw chain along the top of the guide
bar may push the guide bar rapidly back towards
the operator.
Either of these reactions may cause you to lose
control of the saw which could result in serious
personal injury. Do not rely exclusively upon the
safety devices built into your saw.
As a chain saw user, you should take several steps
to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/ or
incorrect operating procedures or conditions and
can be avoided by taking proper precautions as
given below:
Maintain a rm grip, with thumbs and ngers
encircling the chain saw handles, with both hands
on the saw and position your body and arm to allow
you to resist kickback forces (Fig. L).
Kickback forces can be controlled by the operator,
if proper precautions are taken. Do not let go of the
chain saw.
Do not overreach and do not cut above shoulder height.
This helps prevent unintended tip contact
and enables better control of the chain saw in
unexpected situations.
Only use replacement bars and chains specied by
the manufacturer.
Incorrect replacement bars and chains may cause
chain breakage and/or kickback.
Follow the manufacturer´s sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kickback.
Additional safety informations
If the power cable for this equipment is damaged, it
must be replaced by the manufacturer, a customer
service agent of the same or a similarly qualied
person in order to prevent hazards.
Lay the extension cable in such a way that it will
not be caught by branches or similar during sawing.
Use a surge protector with a release current of 30
mA or less.
Have your power tool serviced by a qualied repair
person using only identical replacement parts.
Carefully follow the maintenance, control and
service instructions in this manual.
Practise using the saw (sawing logs on a sawhorse) and
get an experienced user or a specialist to explain to you
the function of the saw, the way of working, the techniques
of sawing and the personal protection equipment.
6. Technical data
Technical data
Cutting data Chainsaw
cutting lenght mm 440
bar lenght mm 457
capacity oiltank l 0,28
type of oil wear resistant oil
saw chain division 3/8"
drive link thickness 1,27mm
saw chain type Oregon
91PX062X
number of teeths drive
sprocket
6
tooth pitch of drive
sprocket
3/8"
chain brake yes
guide bar type Oregon
180SDEA041
engine
motor V/Hz 230-240V / 50 Hz
power W 2400
rotation speed max. min-1 8000
Weight kg 5,0
Subject to technical changes!
Information concerning noise emission measured
according to relevant standards:
Sound pressure LpA = 89,3 dB(A)
Sound power LWA = 100,3 dB(A)
guaranteed Sound power LWA = 108 dB(A)
Uncertainty KPA = 2,5 dB(A)
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration Ahv (front handle) = 7,618 m/s2
Vibration Ahv (rear handle) = 4,633 m/s2
Uncertainty KPA = 1,5 m/s2
The specied vibration emission value has been
measured according to a standardised testing
procedure and can be used for comparison of one
electric tool with another;
27

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach CSE2400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach CSE2400 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 3.03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info