781689
24
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
24 | GB
5. Before using the tool on an actual workpiece, let
it run for a while. Watch for vibration or wobbling
that could indicate poor installation or a poorly
balanced wheel.
6. Use the specied surface of the wheel to perform
the grinding.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the workpiece immediately after op-
eration; it may be extremely hot and could burn
your skin.
9. Observe the instructions of the manufacturer for
correct mounting and use of wheels. Handle and
store wheels with care.
10. Do not use separate reducing bushings or adap-
tors to adapt large hole abrasive wheels.
11. Use only anges specied for this tool.
12. For tools intended to be tted with threaded hole
wheel, ensure that the thread in the wheel is long
enough to accept the spindle length.
13. Check that the workpiece is properly supported.
14. Pay attention that the wheel continues to rotate
after the tool is switched off.
15. If working place is extremely hot and humid, or
badly polluted by conductive dust, use a shortcir-
cuit breaker (30 mA) to assure operator safety.
16. Do not use the tool on any materials containing
asbestos.
17. When use cut-off wheel, always work with the
dust collecting wheel guard required by domestic
regulation.
18. Cutting wheels must not be subjected to any lat-
eral pressure.
m WARNING
This electric tool generates an electromagnetic
eld during operation. This eld can impair ac-
tive or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons
with medical implants consult with their physi-
cian and the manufacturer of the medical implant
prior to operating the electric tool.
Information on the rechargeable battery
Please observe the operating manual for the re-
chargeable batteries.
Information on the charging unit and charging
process
Please observe the operating manual for the charg-
ing unit.
Additional safety warnings specic for abrasive
cutting-off operations:
a) Do not “jam” the cut-off wheel or apply ex-
cessive pressure. Do not attempt to make an
excessive depth of cut. Overstressing the wheel
increases the loading and susceptibility to twisting
or binding of the wheel in the cut and the possibil-
ity of kickback or wheel breakage.
b) Do not position your body in line with and be-
hind the rotating wheel. When the wheel, at the
point of operation, is moving away from your body,
the possible kickback may propel the spinning
wheel and the power tool directly at you.
c) When wheel is binding or when interrupting a
cut for any reason, switch off the power tool
and hold the power tool motionless until the
wheel comes to a complete stop. Never at-
tempt to remove the cut-off wheel from the cut
while the wheel is in motion otherwise kick-
back may occur. Investigate and take corrective
action to eliminate the cause of wheel binding.
d) Do not restart the cutting operation in the
workpiece. Let the wheel reach full speed and
carefully re-enter the cut. The wheel may bind,
walk up or kickback if the power tool is restarted
in the workpiece.
e) Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kick-
back. Large workpieces tend to sag under
their own weight. Supports must be placed un-
der the workpiece near the line of cut and near the
edge of the workpiece on both sides of the wheel.
f) Use extra caution when making a “pocket
cut” into existing walls or other blind areas.
The protruding wheel may cut gas or water pipes,
electrical wiring or objects that can cause kick-
back.
g) Do not make curved cuts. Overstressing the
wheel increases the loading and susceptibility to
twisting and binding of the wheel in the cut and
the possibility of kickback or wheel breakage,
which can lead to serious injuries.
6. Additional Safety Warnings
1. When using depressed centre grinding wheels,
be sure to use only berglass-reinforced wheels.
2. Never use Stone Cup type wheels with this grind-
er. This grinder is not designed for these types of
wheels and the use of such a product may result
in serious personal injury.
3. Be careful not to damage the spindle, the ange
(especially the installing surface) or the lock nut.
Damage to these parts could result in wheel
breakage.
4. Make sure the wheel is not contacting the work-
piece before the switch is turned on.
24

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach CAG115-20ProS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach CAG115-20ProS in de taal/talen: Duits, Engels, Frans, Pools als bijlage per email.

De handleiding is 4.11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info