548579
69
Verklein
Vergroot
Pagina terug
1/85
Pagina verder
English - 68 -
After factory settings are loaded,First Time
Installation menu will be displayed.
The menu which is displayed for language selection
appears on the screen at rst. By using or
buttons, select the desired language option,
and press OK button to activate. After then, First
time installation OSD will appear on the screen.
By pressing or buttons, select the Country
you want to set and press OK button (* only for EU
countries). Next, active antenna mode selection OSD
will appear on the screen. Use or to set and
press OK to continue. See the section, “Initial Settings”
for more information. After active antenna mode option
is selected, a message asking for automatic search
appears on the screen:
HighlightYes item by pressing or buttons
and press OK button to start installation. To select
the “Yes or “No” option, highlight the item by using “
or “ buttons and press OK button.
After then, the following OSD will be displayed on
the screen:
If you select CABLE option, the following screen will
be displayed:
You can select frequency ranges from this screen. For
highlighting lines you see, use or button. You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
Stop Frequency as desired by using numeric buttons
on the remote control. After this operation, you can set
Search Step as 8000 KHz or 1000 KHz. If you select
1000 KHz, the Tv will perform search process in a
detailed way. Searching duration will thus increase
accordingly. When nished, press OK button to start
automatic search. Automatic searching screen will be
displayed during the process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
If you select AERIAL option from the Search Type
screen, the digital television will search for digital
terrestrial TV broadcasts:
The IDTV will automatically tune to the UHF or VHF
(** for EU countries) transmission channels, searching
for digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take about
a few minutes. To cancel searching, you can press the
MENU button at any time during the process.
Note: If the digital TV fails to store any channels, No
channels available. message will be displayed on
the screen.
Either you select AERIAL or CABLE option from the
search type menu, after the digital automatic search
is completed, the following message asking for
analogue channel search appears on the screen:
Operation of analogue channel installation is explained
previously in “Initial Installation” section.
Media Browser (in DTV mode)
Whenever you plug a USB ash disk to your TV, the
following message will be displayed on the screen:
Select YES or NO by pressing “ ” or “ ” button and
OK button to continiue.
You can also select Media Browser item from the
main menu by using or buttons. Press OK to
view Media Browser contents. You can play audio
and photo and video (optional) les from a USB
ash disk.
Note: Some USB compliant devices may not be
supported.
Note: Movie Sense and Pixellence features cannot
be set while in Media Browser mode.
69

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Schaub Lorenz 32LT655C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Schaub Lorenz 32LT655C in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 14,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info