548579
68
Verklein
Vergroot
Pagina terug
1/85
Pagina verder
English - 67 -
Cable Installation
Select Cable Installation line in the Installation menu
and use OK button to view the menu contents:
Automatic Channel Scan
Automatic channel scan is started by pressing
OK button while Automatic channel scan item is
highlighted. The following message appears on the
screen:
Highlight Yes or No by using or buttons
and press OK button to con rm. If Yes is selected,
automatic search starts. Selecting No cancels
automatic search.
You can select frequency ranges from this screen. For
highlighting the lines you see, use or button.
You can enter the frequency range manually by using
the numeric buttons on the remote control. Set Start
and Stop Frequency as desired by using numeric
buttons on the remote control. After this operation,
you can set Search Step as 8000 KHz or 1000 KHz.
If you select 1000 KHz, the Tv will perform search
process in a detailed way. Searching duration will
thus increase accordingly. When nished, press OK
button to start automatic search.
When nished, press OK button to start automatic
search. Automatic searching screen will be displayed
during the process.
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen: Operation of
analogue channel installation is explained in
“Automatic Channel Scan section above.
Frequency Search
Enter the desired frequency, Modulation and symbol
rate numbers. Modulation can be set as Auto, 16QAM,
32QAM, 64QAM, 128QAM and 256QAM.
When nished, press OK button, and the TV will start
frequency search.
Network Search
When you select Network Search line and press OK
button, the following menu screen will be displayed
on the screen:
Enter Start and Stop frequency ranges that you
want to search within. After this operation, you
can set Search Step as 8000 KHz or 1000 KHz.
If you select 1000 KHz, the Tv will perform search
process in a detailed way.Searching duration will
thus increase accordingly. When nished press OK
button to continue. The process will then start. During
the Network Search, if channels that have network
search info are found, the TV will automatically show
the frequencies of those channels and network search
process will end by locating those channels.
After search is completed, a message asking whether
to search for analogue channels appears on the
screen: Operation of analogue channel installation
is explained in “Automatic Channel Scan” section
above.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press
or button to select Clear Service List and then
press OK. The following OSD will be displayed on
the screen:
Press OK to cancel. Select Yes by pressing or
button and press OK to delete all of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlightFirst Time
Installation menu item and press OK button, then
you will be asked whether or not to delete the settings.
SelectingYes by pressing OK button will delete the
existing channel table.
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Schaub Lorenz 32LT655C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Schaub Lorenz 32LT655C in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 14,8 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info