699460
29
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
SATEL VERSA 27
5.14.1 Adding new ABAX wireless devices
The control panel can support up to 30 wireless devices. The number of actually supported
devices depends on how many positions the individual devices occupy. Each position means
one wireless zone or one wireless zone and one wireless output.
If a device occupies two or more positions, its addition will respectively decrease the number
of wireless devices that can still be registered (e.g. after adding a ACX-200 expander, which
takes up 4 positions, the controller can still support 26 other wireless devices).
Even if a device occupies several zones in the system, only the first of them should be
indicated during the device adding procedure. The next ones are assigned automatically
(these are the zones following the selected one).
For some wireless devices, you can select whether the device will take up one or two
positions (channels) on the list of devices. Depending on the device, if one position is
selected:
AMD-101 – only additional NC input will be supported,
AMD-102 – only additional inputs (roller shutter and NC) will be supported;
AOD-200 – only the motion detector will be supported;
AVD-100 – only the vibration detector will be supported.
If the device occupies an output as well, its number will be the same as the number of zone
selected during the device adding procedure.
The control panel does not support wireless outputs with numbers from 13 to 30.
DLOADX program
You can add ABAX wireless devices in the “VERSA – Structure” window, “Hardware” tab,
after clicking on the ABAX system controller name in the list of devices.
1. In the “Zones/Outputs” tab, click on the “Read” button to read the data related to wireless
devices from the controller (these data are not read after clicking on the button in
the main menu).
2. Click on the zone to which a new wireless device is to be assigned (you can also select
the zone later in the “New wireless dev.” window).
3. Click on the “New device” button. The “New wireless dev.” window will open.
4. Enter the 7-digit serial number of the added device. The serial number can be found on
the electronics board or on the enclosure. Each ARF-100 radio signal level tester has
serial number 0000500.
5. Depending on the device type:
ACX-200 / ACX-201: power-up the expander,
ARF-100: turn on the device,
ASW-100 E / ASW-100 F: insert the controller into 230 V AC socket,
other devices: open the tamper contact.
6. The message will confirm that a new device has been added (unless you have entered an
invalid serial number, of which you will be informed by a message). The new zone name
will be displayed. You can change it. The same name will also be given to the output, if
the device is assigned to the output.
7. Click on the “OK” button (you can click on the “Quit” button to cancel adding a new device
or on the “Next” button to proceed to adding a next wireless device).
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel VERSA 5

Satel VERSA 5 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 5 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 5 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 5 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 5 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 5 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 5 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 5 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 5 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 5 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 5 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 5 Snelstart handleiding - English - 11 pagina's

Satel VERSA 5 Aanvulling / aanpassing - English - 87 pagina's

Satel VERSA 5 Gebruiksaanwijzing - English - 32 pagina's

Satel VERSA 5 Gebruiksaanwijzing - English - 42 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info