699459
17
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
SATEL VERSA 15
6.6 Triggering the alarm from keypad
The installer can permit triggering alarms from the keypad. To trigger an alarm, do the
following:
fire alarm – press for approx. 3 seconds,
medical (auxiliary) alarm – press for approx. 3 seconds,
panic alarm – press for approx. 3 seconds. The installer defines whether the loud
panic alarm (setting off the loud alarm signal) or the silent panic alarm (without the loud
signal) will be triggered.
6.7 Turning the CHIME on /off
The CHIME is five short sounds by means of which the keypad will inform you e.g. that
a door / window is open, when the system is disarmed. The installer defines which zones of
the alarm system can trigger the CHIME and whether it can be turned on/off by the users.
Press and hold down for about 3 seconds to turn on or off the CHIME signaling.
6.8 User menu
Enter the code and press to get access to the user menu. The functions you can run
will be displayed. The list of available functions depends on your rights, as well as on the
state and configuration of the system.
In order to quit the function and/or user menu, press . The keypad will quit the menu
automatically, if 2 minutes have elapsed since the last keypress.
6.8.1 Navigating through the menu and running functions
Using the arrow keys
1. Using the and keys, find the required submenu or function. The currently
selected submenu or function is indicated by the cursor on the left (the submenu
indicating cursor: ; the function indicating cursor: ).
2. Press
or to open a submenu or run a function (use the key to go back
to the previous menu/submenu).
Using the digit shortcuts
All submenus and functions are numbered. In order to enter a submenu, just press the key
with number corresponding to the submenu number. In order to start a function, press the
key with number corresponding to the function number, and then
. You can quickly start
the selected function by entering at once a sequence of some digits (corresponding to the
consecutive submenu numbers and the function number) and pressing .
For example, to start the zone inhibiting function, enter the user menu and then press
, where:
- entering the 4. BYPASSES submenu,
- running the 1. INHIBIT function.
Remember that the sequence of digits which starts a function e.g. from the main menu
level will not start the same function from the submenu level.
6.8.2 “Step by step” programming method
In case of some functions (e.g. adding and editing users, configuring timers, etc.), the
programming is effected by using the “step by step” method. After calling the function and
selecting the item to be configured from the list, the first parameter available for programming
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel VERSA 10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel VERSA 10 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel VERSA 10

Satel VERSA 10 Snelstart handleiding - Nederlands - 11 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Nederlands - 44 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Nederlands - 86 pagina's

Satel VERSA 10 Installatiehandleiding - Nederlands - 35 pagina's

Satel VERSA 10 Snelstart handleiding - Nederlands - 2 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - Deutsch - 89 pagina's

Satel VERSA 10 Gebruiksaanwijzing - Deutsch - 44 pagina's

Satel VERSA 10 Installatiehandleiding - Deutsch - 37 pagina's

Satel VERSA 10 Snelstart handleiding - Deutsch - 2 pagina's

Satel VERSA 10 Snelstart handleiding - English - 11 pagina's

Satel VERSA 10 Aanvulling / aanpassing - English - 87 pagina's

Satel VERSA 10 Installatiehandleiding - English - 36 pagina's

Satel VERSA 10 Gebruiksaanwijzing - English - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info